Intermec CK30 Handbuch

CK30 Handheld Computer Operator’s Guide

Battery

latch

8:29PM

8:29 PM

8:29PM

8:29 PM

8:29PM

8:29 PM

8:29PM

8:29 PM

8:29PM

8:29 PM

I/O

ABCD

Scan button

Good Read light

Trigger

CK30

ABCD

Empty

8:29PM

8:29 PM

LowHalf full

Turn on the CK30.

Press I(the Power key) to turn on the CK30. When you

turn on the CK30, the screen turns on. If the screen does

not turn on, install a charged battery.

Check the battery level.

Turn on the backlight.

Change the contrast.

Change the beeper volume.

Press and release B (the Orange key),

and then press and release E

to change the contrast.

Scan a bar code.

Point the CK30 at the bar code.

Press the Scan button or pull the trigger.

If your CK30 has a laser scanner, a red spot or narrow beam of light appears

near the bar code.

If your CK30 has an imager, a wide beam of light appears near the bar code.

Move the CK30 so the spot or beam is centered on the bar code.

When the Good Read light turns on, the bar code has been scanned.

Press Ito turn oﬀ the

CK30.

Press down on the latch

and lift the battery out of

the CK30.

Insert the tabs on the

new battery into the

bottom of the opening.

Press the battery in

place to snap the latch.

Press and release C(the Green key), and then press

and release Eto change the beep volume.

If the battery is low, change it.

Press E(the Backlight key) to turn on the backlight.

The backlight makes the screen easier to see in dark

areas.

Depending on the kind of scanner your CK30 has, you may

need to move the CK30 closer to or farther from the bar code. 6001 36th Avenue West

Everett, WA 98203

U.S.A.

www.intermec.com

CK30 Handheld Computer Operator’s Guide

*073407-001*

P/N 073407-001

Icons appear on

the screen when

the battery is

not fully charged.

CK30 Handheld Computer Operator’s Guide

Using the Screen Icons

While you use the CK30, icons appear at the bottom of the screen to help you keep track of the battery and network connections. See the next

table to learn what the icons mean.

Icon Means

Battery is half full. You should be able to work for several more hours before changing batteries.

Battery is almost empty. You need to install a charged battery as soon as possible.

Battery is empty. Install a charged battery right away!

Ethernet connection to the network is active.

No Ethernet connection to the network. Make sure the cable is connected properly

and contact your supervisor.

Excellent radio connection to the network.

Good radio connection to the network. You might need to move to get a better connection.

Bad radio connection to the network. Try moving until you get a better connection.

No radio connection to the network. You need to move until you get reconnected.

Orange key is pressed.

Green key is pressed.

Using the Keypad

See the next illustration to ﬁnd the locations of the Power (I), Backlight (E), Orange (B), and Green (C) keys on your CK30.

More Information

For more information on operating the CK30, see the CK30 Handheld Computer Quick Start Guide (P/N 073389) or the CK30 Handheld Computer

User’s Manual (P/N 073528).

8:29 PM

Icons appear here

pace

“

‘

PROG

{}

[]

Backlight key

Green key

Orange key

Power key

789

456

Esc

Alt

Ta b

Backlight key

Green key

Orange key

Power key

PROG

[]

(

)

123

456

Backlight key

Green key

Orange key

Power key

PROG

Andere Handbücher für CK30

Inhaltsverzeichnis

Andere Intermec Handheld Handbücher

Intermec

Intermec CN2G Bedienungsanleitung

Intermec

Intermec CN70 RFID Bedienungsanleitung

Intermec

Intermec CN50 Bedienungsanleitung

Intermec

Intermec 700 Series Bedienungsanleitung

Intermec

Intermec 6640 Gebrauchs- und Pflegehandbuch

Intermec

Intermec CK30 Bedienungsanleitung

Intermec

Intermec 700 Series Bedienungsanleitung

Intermec

Intermec CN4 Bedienungsanleitung

Intermec

Intermec CS40 Vehicle Power Adapter Bedienungsanleitung

Intermec

Intermec CK3 Series Bedienungsanleitung

Intermec

Intermec Oracle-Ready CK31 Bedienungsanleitung

Intermec

Intermec CN2 Bedienungsanleitung

Intermec

Intermec CK3a Bedienungsanleitung

Intermec

Intermec CN50 Bedienungsanleitung

Intermec

Intermec CN51 Bedienungsanleitung

Intermec

Intermec NORAND 600 Bedienungsanleitung

Intermec

Intermec Oracle-Ready CK31 Bedienungsanleitung

Intermec

Intermec CN51 Bedienungsanleitung

Intermec

Intermec CK70 RFID Bedienungsanleitung

Intermec

Intermec CN50 Bedienungsanleitung

Intermec

Intermec CN30 Bedienungsanleitung

Intermec

Intermec CK1 Serial Dock Bedienungsanleitung

Intermec

Intermec CK3R Bedienungsanleitung

Intermec

Intermec CN4 Bedienungsanleitung

Beliebte Handheld Handbücher anderer Marken

Honeywell

Honeywell Dolphin 9900 Bedienungsanleitung

Honeywell

Honeywell CN75 Bedienungsanleitung

MiTAC

MiTAC Mio 168 Bedienungsanleitung

Wasp

Wasp WDT92 Bedienungsanleitung

Texas Instruments

Texas Instruments TI-Nspire Bedienungsanleitung

AXEM Technology

AXEM Technology MBS Bedienungsanleitung

Armstrong

Armstrong Brain Wave Montageanleitung

Unitech

Unitech TB128 Bedienungsanleitung

Symbol

Symbol MC9000-G Installations- und Betriebshandbuch

Unitech

Unitech HT1 1D Batch Bedienungsanleitung

Ingenico

Ingenico IWL220 GPRS Bedienungsanleitung

Symbol

Symbol c2000 Bedienungsanleitung

Symbol

Symbol MC18 Installations- und Betriebshandbuch

Acer

Acer n20 Bedienungsanleitung

Docomo

Docomo F-04H Bedienungsanleitung

Toshiba

Toshiba e350 Series Bedienungsanleitung

Palm

Palm Tungsten E2 Handbuch

Alien

Alien ALR-H460 Bedienungsanleitung