Intermec PM4I Bedienungsanleitung
User’s Guide
EasyCoder PM4i
Bar Code Label
Printer
(IPL Version)
Intermec Technologies Corporation
Corporate Headquarters
6001 36th Ave. W.
Everett, WA 98203
U.S.A.
www.intermec.com
The information contained herein is proprietary and is provided solely
for the purpose of allowing customers to operate and service Intermec-
manufactured equipment and is not to be released, reproduced, or used
for any other purpose without written permission of Intermec.
Information and specifications contained in this document are subject to
change without prior notice and do not represent a commitment on the
part of Intermec Technologies Corporation.
© 2004 by Intermec Technologies Corporation. All rights reserved.
The word Intermec, the Intermec logo, Norand, ArciTech, CrossBar,
Data Collection Browser, dcBrowser, Duratherm, EasyCoder, EasyLAN,
Enterprise Wireless LAN, EZBuilder, Fingerprint, i-gistics, INCA (under
license), InterDriver, Intermec Printer Network Manager, IRL, JANUS,
LabelShop, Mobile Framework, MobileLAN, Nor*Ware, Pen*Key,
Precision Print, PrintSet, RoutePower, TE 2000, Trakker Antares, UAP,
Universal Access Point, and Virtual Wedge are either trademarks or regis-
tered trademarks of Intermec Technologies Corporation.
Throughout this manual, trademarked names may be used. Rather than
put a trademark (™ or ®) symbol in every occurrence of a trademarked
name, we state that we are using the names only in an editorial fashion,
and to the benefit of the trademark owner, with no intention of infringe-
ment.
There are U.S. and foreign patents pending.
The name Centronics is wholly owned by GENICOM Corporation.
Kimdura is a registered trademark of Kimberly Clark.
Microsoft is a registered trademark of Microsoft Corporation.
Torx is a registered trademark of Camcar Division of Textron Inc.
TrueDoc is a registered trademark of Bitstream, Inc.
TrueType is a trademark of Apple Computer Inc.
Unicode is a trademark of Unicode Inc.
Valeron is a registered trademark of Valéron Strength Films, an ITW
Company.
Windows is a trademark of Microsoft Corporation.
Intermec EasyCoder PM4i—User’s Guide (IPL version) iii
Document Change Record
This page records changes to this document. The document was origi-
nally released as version -00.
Version Date Description of Change
-00 May 2003 Supports original IPL version (v2.00).
-01 Oct. 2003 Revised to support IPL v2.10. Information about EasyLAN
Wireless interface added.
-02
-52
Feb. 2004
June 2004
Revised to support IPL v2.20. Information on Intermec
Readiness Indicator added. New method for returning to fac-
tory default added. More bar codes supported.
-03 August
2004
Revised to support IPL v2.30. Support for USB interface,
ribbon low sensor, and paper sensor. Extended setup mode.
Support for composite bar codes.
Version -00 to -09 are original versions in US English.
Version -50 to -59 are Chinese translations.
iv Intermec EasyCoder PM4i—User’s Guide (IPL version)
Intermec EasyCoder PM4i—User’s Guide (IPL version) v
Contents
Contents
Before You Begin........................................................................... ix
Safety Summary.............................................................. ix
Safety Icons ..................................................................... x
Global Services and Support ......................................................... xi
Warranty Information..................................................... xi
Web Support .................................................................. xi
Telephone Support ......................................................... xi
Related Documents ........................................................ xi
1 Introduction
Description of EasyCoder PM4i Printer.........................................2
Safety Summary .............................................................................3
Product Identification ....................................................................3
2 Installation
Unpacking the Printer....................................................................6
Front View.....................................................................................7
Rear View ......................................................................................8
Media Compartment .....................................................................9
Description......................................................................9
Media Supply Roll Post .................................................10
Print Mechanism..........................................................................11
Connections.................................................................................12
Power ............................................................................12
Computer......................................................................12
Controls and Indicators ...............................................................13
Indicator Lamps ............................................................13
Display ..........................................................................14
Keyboard ....................................................................... 14
Beeper ...........................................................................15
3 Starting Up
Switching On the Printer .............................................................18
vi Intermec EasyCoder PM4i—User’s Guide (IPL version)
Contents
4 Media Load
Tear-Off (Straight-through) .........................................................20
Peel-Off (Self-strip) ......................................................................24
Cut-Off........................................................................................29
External Supply (Fanfold) ............................................................33
Rotating Media Supply ................................................................34
5 Thermal Transfer Printing
Ribbon Load................................................................................36
6 Setting Up the Printer
Description. .................................................................................42
Default Setup...............................................................................43
Setup Parameters..........................................................................44
Serial Communication...................................................44
Baud Rate .......................................................44
Character Length ............................................44
Parity...............................................................44
Stop Bits..........................................................45
Protocol ..........................................................45
Test/Service ...................................................................47
Testprint..........................................................47
Data Dump.....................................................48
Memory Reset.................................................48
LSS Test ..........................................................48
Media ............................................................................49
Media Type .....................................................49
Paper Type.......................................................49
Label Length ...................................................49
Sensitivity........................................................49
Darkness .........................................................50
Label Reset Point.............................................50
Form Adj Dots X ............................................50
Form Adj Dots Y.............................................50
Ribbon Low ....................................................50
Paper Low (option) .........................................50
Configuration................................................................51
Emulation .......................................................51
Print Speed......................................................51
Intermec EasyCoder PM4i—User’s Guide (IPL version) vii
Contents
Cutter .............................................................51
Label Taken Sensor..........................................51
Returning to Factory Default Setup .............................................52
7 Setup Mode
Navigating in Setup Mode ...........................................................54
Setup Mode Overviews ................................................................56
8 Options
Introduction ................................................................................62
Integral Liner Takeup Unit...........................................................63
Paper Cutter.................................................................................63
Media Supply Hub.......................................................................63
Paper Sensor.................................................................................63
Media Roll Retainer.....................................................................63
3-inch Adapter.............................................................................63
Label Taken Sensor ......................................................................64
Internal Fan-Fold Guide ..............................................................64
Side Door with Keylock ...............................................................64
Paper Sensor.................................................................................64
Thick Media Printhead ................................................................64
Interface Boards ...........................................................................64
9 Troubleshooting
Intermec Readiness Indicator .......................................................66
Troubleshooting List ....................................................................69
10
Maintenance
Printhead Cleaning ......................................................................72
External Cleaning ........................................................................75
Cleaning the Media Guides..........................................................76
Printhead Replacement ................................................................77
Media Jams ..................................................................................80
11 Adjustments
Narrow Media..............................................................................82
Label Stop Sensor.........................................................................83
viii Intermec EasyCoder PM4i—User’s Guide (IPL version)
Contents
Printhead Pressure........................................................................86
Ribbon Break Shaft......................................................................87
A Technical Specifications
Technical Data .............................................................................90
B Media Specifications
Media Roll Size............................................................................94
Media ..........................................................................................95
Non-Adhesive Strip .......................................................95
Self-Adhesive Strip.........................................................96
Self-Adhesive Labels.......................................................97
Tickets with Gap ...........................................................99
Tickets with Black Mark..............................................101
C Interfaces
RS-232 Interface........................................................................104
USB Interface ............................................................................105
Optional Interfaces ....................................................................106
D Intermec Supplies
Setting the Media Sensitivity Number .......................................110
Intermec EasyCoder PM4i—User’s Guide (IPL version) ix
Before You Begin
Before You Begin
This section provides you with safety information, technical support
information, and sources for additional product information.
Safety Summary
Your safety is extremely important. Read and follow all warnings and
cautions in this document before handling and operating Intermec
equipment. You can be seriously injured, and equipment and data can be
damaged if you do not follow the safety warnings and cautions.
Do not repair or adjust alone
Do not repair or adjust energized equipment alone under any circum-
stances. Someone capable of providing first aid must always be present
for your safety.
First aid
Always obtain first aid or medical attention immediately after an injury.
Never neglect an injury, no matter how slight it seems.
Resuscitation
Begin resuscitation immediately if someone is injured and stops breath-
ing. Any delay could result in death. To work on or near high voltage,
you should be familiar with approved industrial first aid methods.
Energized equipment
Never work on energized equipment unless authorized by a responsible
authority. Energized electrical equipment is dangerous. Electrical shock
from energized equipment can cause death. If you must perform autho-
rized emergency work on energized equipment, be sure that you comply
strictly with approved safety regulations.
x Intermec EasyCoder PM4i—User’s Guide (IPL version)
Before You Begin
Safety Icons
This section explains how to identify and understand dangers, warnings,
cautions, and notes that are in this document. You may also see icons
that tell you when to follow ESD procedures.
A warning alerts you of an operating procedure, practice,
condition, or statement that must be strictly observed to
avoid death or serious injury to the persons working on the
equipment.
A caution alerts you to an operating procedure, practice,
condition, or statement that must be strictly observed to
prevent equipment damage or destruction, or corruption or
loss of data.
This icon appears at the beginning of any procedure in this
manual that could cause you to touch components (such as
printed circuit boards) that are susceptible to damage from
electrostatic discharge (ESD). When you see this icon, you
must follow standard ESD guidelines to avoid damaging
the equipment you are servicing.
Note: Notes either provide extra information about a topic or
contain special instructions for handling a particular condition
or set of circumstances.
Andere Handbücher für PM4I
18
Inhaltsverzeichnis
Andere Intermec Etikettendrucker Handbücher
Intermec
Intermec EasyCoder 501 E Leitfaden
Intermec
Intermec EasyCoder PD41 Bedienungsanleitung
Intermec
Intermec EasyCoder PX6i Bedienungsanleitung
Intermec
Intermec EasyCoder PC4 Bedienungsanleitung
Intermec
Intermec EasyCoder PD4 Bedienungsanleitung
Intermec
Intermec EasyCoder F2 Bedienungsanleitung
Intermec
Intermec EasyCoder 501 E Bedienungsanleitung
Intermec
Intermec EasyCoder 3400e Bedienungsanleitung
Intermec
Intermec PB50 Bedienungsanleitung
Intermec
Intermec 3240 Bedienungsanleitung
Intermec
Intermec EasyCoder 401 Bedienungsanleitung
Intermec
Intermec EasyCoder E4 Bedienungsanleitung
Intermec
Intermec EasyCoder 501XP Original Betriebsanleitung
Intermec
Intermec EasyCoder PC41 Bedienungsanleitung
Intermec
Intermec EasyCoder F4 Original Betriebsanleitung
Intermec
Intermec EasyCoder PX4i Bedienungsanleitung
Intermec
Intermec EasyCoder F2 Bedienungsanleitung
Intermec
Intermec EasyCoder 501XP Bedienungsanleitung
Intermec
Intermec ColorCoder V4 Bedienungsanleitung
Intermec
Intermec PC43d Bedienungsanleitung
