Intermec JANUS JG2010 Bedienungsanleitung

JANUS

2.4 GHz

Installation Utility (4MB)

P/N 064673-004

User’s Manual

Intermec Technologies Corporation

6001 36th Avenue West

P.O. Box 4280

Everett, WA 98203-9280

U.S. service and technical support: 1-800-755-5505

U.S. media supplies ordering information: 1-800-227-9947

Canadian service and technical support: 1-800-688-7043

Canadian media supplies ordering information: 1-800-268-6936

Outside U.S. and Canada: Contact your local Intermec service supplier.

The information contained herein is proprietary and is provided solely for the purpose of allowing

customers to operate and/or service Intermec manufactured equipment and is not to be released,

reproduced, or used for any other purpose without written permission of Intermec.

Information and specifications in this manual are subject to change without notice.

1998 by Intermec Technologies Corporation

The word Intermec, the Intermec logo, JANUS, IRL, TRAKKER, Antares, Duratherm, Precision Print,

PrintSet, Virtual Wedge, and CrossBar are either trademarks or registered trademarks of Intermec

Corporation.

Throughout this manual, trademarked names may be used. Rather than put a trademark () symbol

in every occurrence of a trademarked name, we state that we are using the names only in an

editorial fashion, and to the benefit of the trademark owner, with no intention of infringement.

Manual Change Record

This page records the changes to this manual, which was originally released as version 001.

Version Date Description of Change

002 12/96 New information was added for the JG2050 and for UDP Plus

terminal emulation.

003 9/97 New information was added to describe usin

the installation utilit

on a JG2010.

004 7/98 Installation utilit

software was modified to streamline the

installation/configuration process.

Contents

Before You Begin ix

Cautions and Notes ix

About This Manual ix

Other Related Manuals xii

Learning About the Installation Utility

Unpacking the Installation Utility Kit 1-3

What the Installation Utility Does 1-3

How the Installation Utility Works 1-4

Modifying the JANUS Drive Images 1-5

Drive C Image 1-5

Drive D Image 1-5

Downloading the New JANUS Drive Images 1-6

System Requirements 1-7

Host PC Requirements 1-7

Making a Backup Copy 1-7

Navigating Within Screens 1-8

Preparing to Run the Installation Utility

Why Read This Chapter? 2-3

Setting Up the Host PC 2-3

Creating a HOSTS File 2-3

Understanding Configuration Parameters 2-4

Terminal Selection Screen 2-4

Network/Protocol Selection Screen 2-4

Character Set Screen 2-5

About the Network Parameters 2-6

LAN WorkPlace for DOS Parameters 2-7

NetWare Client for DOS Parameters 2-8

FTP PC/TCP for DOS Parameters 2-9

About the Radio Parameters 2-10

JANUS 2.4 GHz Installation Utility User’s Manual (4MB)

Shelling Out to DOS 2-12

Configuring Multiple JANUS RF Devices 2-13

Running the Installation Utility

Starting the Installation Utility 3-3

Configuring the First JANUS RF Device 3-3

Choosing the Configuration Parameters 3-3

Shelling Out to DOS to Modify the JANUS Drive Images 3-7

Downloading the Modified JANUS Drive Images 3-8

Configuring Multiple JANUS RF Devices 3-10

Restoring the Host PC to the Original Configuration 3-11

Troubleshooting

General Problems 4-3

Error Messages 4-4

Drive A Error Messages 4-8

Deleted, Modified, and New Files

Deleted Files A-3

Files Removed From Drive C A-3

Files Removed From Drive D A-3

Modified CONFIG.SYS File A-4

JG2010 CONFIG.SYS A-4

JG2020 CONFIG.SYS A-6

JG2050 CONFIG.SYS A-8

Modified AUTOEXEC.BAT File A-10

JG2010 AUTOEXEC.BAT A-10

JG2020 AUTOEXEC.BAT A-12

JG2050 AUTOEXEC.BAT A-14

NET.CFG File A-16

JG2010 NET.CFG A-16

JG2020 NET.CFG A-17

Contents

vii

JG2050 NET.CFG A-18

About the NET.CFG Parameters A-20

PCTCP.INI File A-20

NET.BAT File A-22

JG2010 NET.BAT for NetWare Client A-22

JG2010 NET.BAT for LanWorkplace A-22

JG2010 NET.BAT for FTP Application A-23

JG2020 NET.BAT for NetWare Client A-23

JG2020 NET.BAT for LAN WorkPlace A-24

JG2020 NET.BAT for FTP Application A-24

JG2050 NET.BAT for NetWare Client A-25

JG2050 NET.BAT for LAN WorkPlace A-25

JG2050 NET.BAT for FTP Application A-26

About the NET.BAT Parameters A-26

Other Useful Files A-27

APP.BAT for LAN WorkPlace for DOS A-27

APP.BAT for NetWare Client for DOS A-27

APP.BAT for FTP Application A-27

GO.BAT for LAN WorkPlace for DOS and FTP Application A-28

GO.BAT for NetWare Client for DOS A-28

UNNET.BAT for LAN WorkPlace for DOS A-28

UNNET.BAT for NetWare Client for DOS A-28

UNNET.BAT for FTP Application A-29

IMLOGIN.BAT A-29

IMLOGOUT.BAT A-29

UDPPLUS.INI A-29

Minimum Files for LAN WorkPlace Installations A-30

Helpful Information

NetWare Client User Information B-3

ARP Table Entry for TCP/IP Applications B-3

Setting the Security ID on Your JANUS RF Devices B-5

Customizing the J24TE.INI File B-10

Creating a JANUS.INI File B-11

Configuring Multiple JANUS RF Devices Using Batch Files B-13

JANUS 2.4 GHz Installation Utility User’s Manual (4MB)

viii

Glossary

Index

Before You Begin

This section introduces you to cautions, document formatting conventions, and

sources of additional product information.

Cautions and Notes

The cautions and notes in this manual use the following format.

CAUTION

Caution

A caution alerts you to an operating procedure, practice, condition, or

statement that must be strictly observed to prevent equipment damage or

destruction, or corruption or loss of data.

Conseil

Une précaution vous avertit d’une procédure de fonctionnement, d’une

méthode, d’un état ou d’un rapport qui doit être strictement respecté pour

empêcher l’endommagement ou la destruction de l’équipement, ou l’altération

ou la perte de données.

Note: Notes either provide extra information about a topic or contain special

instructions for handling a particular condition or set of circumstances.

About This Manual

This manual provides you with information on the features of the JANUS 2.4

GHz Installation Utility, how to use it, how to configure it, and what the error

messages mean. To run this Installation Utility, you must be familiar with your

host PC, JANUS RF devices, and your network.

JANUS 2.4 GHz Installation Utility User’s Manual (4MB)

What You Will Find in This Manual

This table summarizes the information in each chapter of this manual:

For Information On Refer To

Understanding the

Installation Utility Chapter 1, “Learning About the Installation Utility.”

Explains the Installation Utility features and how it

works. This chapter also provides system and host

PC requirements.

Information you need to

gather before running the

Installation Utility

Chapter 2, “Preparing to Run the Installation

Utility.” Explains the network and radio parameters.

Running the Installation

Utility Chapter 3, “Running the Installation Utility.”

Explains how to run the Installation Utility.

Troubleshooting information Chapter 4, “Troubleshooting.” Provides solutions to

problems you may encounter while running the

Installation Utility.

Which files are deleted,

modified, and created Appendix A, “Deleted, Modified, and New Files.”

Provides printouts of the modified CONFIG.SYS and

AUTOEXEC.BAT files and the new NET.CFG,

NET.BAT, APP.BAT, GO.BAT, PCTCP.INI, and

UNNET.BAT files.

Special Information Appendix B, “Helpful Information.” Provides

helpful information you may need when running the

Installation Utility.

In addition, this manual contains a glossary and an index.

Andere Handbücher für JANUS JG2010

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Intermec PDA Handbücher

Intermec

Intermec Trakker Antares 2410 Handbuch

Intermec

Intermec NORAND 6642 Bedienungsanleitung

Intermec

Intermec 751G Handbuch

Intermec

Intermec Oracle-Ready CK31 Bedienungsanleitung

Intermec

Intermec PEN*KEY 6200 Bedienungsanleitung

Intermec

Intermec PEN*KEY 6200 Bedienungsanleitung

Intermec

Intermec M90 Series Bedienungsanleitung

Intermec

Intermec Trakker Antares 2475 Bedienungsanleitung

Intermec

Intermec 6212 Bedienungsanleitung

Intermec

Intermec NORAND 6642 Gebrauchs- und Pflegehandbuch

Intermec

Intermec 5020 Benutzerhandbuch

Intermec

Intermec CK3a1 Bedienungsanleitung

Intermec

Intermec Trakker Antares 2410 Benutzerhandbuch

Intermec

Intermec Trakker Antares 2400 Bedienungsanleitung

Intermec

Intermec PEN*KEY 6620 Bedienungsanleitung

Intermec

Intermec 6650 Bedienungsanleitung

Intermec

Intermec CN4e Bedienungsanleitung

Intermec

Intermec 700 Series 730B Handbuch

Intermec

Intermec CN70e RFID Bedienungsanleitung

Intermec

Intermec 6220 Bedienungsanleitung

Intermec

Intermec PEN*KEY 6100 Bedienungsanleitung

Intermec

Intermec Trakker T2090 Bedienungsanleitung

Intermec

Intermec Trakker Antares 2410 Bedienungsanleitung

Intermec

Intermec PEN*KEY 6400 Bedienungsanleitung

Beliebte PDA Handbücher anderer Marken

SPOT

SPOT SPOT Bedienungsanleitung

Palm

Palm handheld Bedienungsanleitung

Winmate

Winmate E500QK Bedienungsanleitung

Getac

Getac PS236 Bedienungsanleitung

Sharp

Sharp CE-1600P Bedienungsanleitung

HTC

HTC PHAR100 Bedienungsanleitung

Mindeo

Mindeo M40 Bedienungsanleitung

Acer

Acer n30 Bedienungsanleitung

ASCOM

ASCOM 9D24 EX Bedienungsanleitung

Unitech

Unitech PA520BTNF Bedienungsanleitung

HandHeld

HandHeld Nautiz X3 Bedienungsanleitung

Casio

Casio PALM Bedienungsanleitung

Sharp

Sharp TM-20 Kurzanleitung

Atid

Atid AT870 Bedienungsanleitung

AML

AML M7225 Bedienungsanleitung

Audiovox

Audiovox Maestro Technisches Handbuch

Casio

Casio PV-750 Plus Gebrauchsanweisung

Unitech

Unitech PT630 Bedienungsanleitung