Intermec EasyCoder 7421 Bedienungsanleitung

EasyCoder

™

7421 Printer

P/N 066386-003

User’s Manual

EasyCoder

7421

Intermec Technologies Corporation

6001 36th Avenue West

P.O. Box 4280

Everett, WA 98203-9280

U.S. technical and service support: 1.800.755.5505

U.S. media supplies ordering information: 1.800.227.9947

Canadian technical and service support: 1.800.687.7043

Canadian media supplies ordering information: 1.800.267.6936

Outside U.S. and Canada: Contact your local Intermec service

supplier.

The information contained herein is proprietary and is provided solely

for the purpose of allowing customers to operate and/or service

Intermec manufactured equipment and is not to be released,

reproduced, or used for any other purpose without written permission

of Intermec.

Information and specifications in this manual are subject to change

without notice.

1998 - 2000 by Intermec Technologies Corporation

The word Intermec, the Intermec logo, JANUS, IRL, TRAKKER,

Antares, Adara, Duratherm, EZBuilder, EasyCoder, Precision Print,

PrintSet, Virtual Wedge, and CrossBar are trademarks of Intermec

Corporation.

Throughout this manual, trademarked names may be used. Rather

than put a trademark (or ) symbol in every occurrence of a

trademarked name, we state that we are using the names only in an

editorial fashion, and to the benefit of the trademark owner, with no

intention of infringement.

The software contained in the 7421 Printer and the accompanying

materials are copyrighted. Unauthorized copying of the software,

including software that has been modified, merged, or included with

other software, or the written materials is expressly forbidden without

the prior written consent of Intermec. All right, title, and interest in all

copies of this software are and shall at all times remain the sole and

exclusive property of Intermec. Customer may be held legally

responsible for any copyright infringement that is caused or

encouraged by its failure to abide by these terms.

Manual Change Record

Date Revision Record of Changes

3/00 003 Information about the Printer Companion CD,

PrintSet, and network interface cards was added.

Contents

Before You Begin ix

Warranty Information ix

Safety Summary ix

Warnings, Cautions, and Notes x

About This Manual xi

Operating the Printer

Getting to Know Your Printer 1-3

Learning How to Operate the Printer 1-5

Understanding the Power Light 1-5

Using the Feed/Pause Button 1-6

Loading Media Into the Printer 1-7

Using the Peel-Off Option 1-7

Loading Fanfold Media 1-16

Inserting the Optional Memory Card 1-20

Configuring the Printer

Configuring the Printer 2-3

Setting the Media Sensitivity Number 2-3

Setting the MSN for Intermec Media and

Ribbon 2-5

Setting the MSN for Other Media and Ribbon

2-6

Adjusting the Print Darkness 2-8

Adjusting the Label Gap Sensor 2-9

Communicating With the Printer 2-10

Printing a Test Label 2-11

Using the Printhead Loading Modes 2-12

Maintaining the Printer

Maintenance Schedule 3-3

Tools for Cleaning the Printer 3-5

Cleaning the Printhead 3-6

Cleaning the Printer Covers 3-7

Cleaning the Drive Roller and Peel-Off Bar 3-8

Cleaning the Label Sensors 3-10

Troubleshooting

Troubleshooting Checklist 4-3

Printer Operation Problems 4-4

Print Quality Problems 4-5

Communication Problems 4-6

Using Data Line Print Mode 4-6

Preventing Data Loss 4-7

Resetting the Printer to Factory Defaults 4-8

Printer Specifications

Printer Specifications A-3

Printer Options A-5

Bar Code Symbologies Supported A-6

vii

Communications Reference

About Communications B-3

Serial Communication Protocols B-3

RS-232 Serial Interface B-8

Character Sets

International Character Sets C-3

Extended Character Sets C-7

Index

Before You Begin

This section introduces you to standard warranty provisions,

safety precautions, warnings and cautions, terms, and sources of

additional product information. A documentation roadmap is

also provided to help you find information.

Warranty Information

To receive a copy of the standard warranty provision for this

product, contact your local Intermec sales organization. In the

U.S. call 1.800.755.5505, and in Canada call 1.800.688.7043.

Otherwise, refer to the Worldwide Sales & Service list that was

shipped with this manual for the address and telephone number

of your Intermec sales organization.

Safety Summary

Your safety is extremely important. Read and follow all

warnings and cautions in this book before handling and

operating Intermec equipment. You can be seriously injured, and

equipment and data can be damaged if you do not follow the

safety warnings and cautions.

Do not repair or adjust alone

Do not repair or adjust energized

equipment alone under any circumstances. Someone capable of

providing first aid must always be present for your safety.

First aid

Always obtain first aid or medical attention

immediately after an injury. Never neglect an injury, no matter

how slight it seems.

Resuscitation

Begin resuscitation immediately if someone is

injured and stops breathing. Any delay could result in death. To

work on or near high voltage, you should be familiar with

approved industrial first aid methods.

Energized equipment

Never work on energized equipment

unless authorized by a responsible authority. Energized

electrical equipment is dangerous. Electrical shock from

energized equipment can cause death. If you must perform

authorized emergency work on energized equipment, be sure

that you comply strictly with approved safety regulations.

Warnings, Cautions, and Notes

The warnings, cautions, and notes in this manual use these

formats.

Warning

A warnin

warns

ou o

an o

eratin

rocedure,

ractice, condition, or statement

that must be strictl

observed to avoid

death or serious in

to the

ersons

workin

on the e

ment.

Avertissement

Un avertissement vous alerte d’une

rocédure de

onctionnement, d’une méthode,

d’un état ou d’un ra

ort

ui doit être

strictement res

ecté

our éviter l’occurrence

de mort ou de blessures

raves aux

ersonnes

manupulant l’équipement.

Caution

A caution alerts

ou to an o

eratin

rocedure,

ractice, condition, or statement

that must be strictl

observed to

revent

ment dama

e or destruction, or

corru

tion, or loss o

data.

Conseil

Une

récaution vous avertit d’une

rocédure

onctionnement, d’une méthode, d’un état

ou d’un ra

ort

ui doit être strictement

res

ecté

our em

êcher l’endomma

ement ou

la destruction de l’é

ement, ou

l’altération ou la perte de données.

Notes: Notes are statements that either provide extra information

about a topic or contain special instructions for handling a particular

condition or set of circumstances.

Andere Handbücher für EasyCoder 7421

Inhaltsverzeichnis

Andere Intermec Drucker Handbücher

Intermec

Intermec EasyCoder 501 SA Bedienungsanleitung

Intermec

Intermec EasyCoder F2 Bedienungsanleitung

Intermec

Intermec EasyCoder 101 Bedienungsanleitung

Intermec

Intermec PB42 Bedienungsanleitung

Intermec

Intermec 6820 Series Handbuch

Intermec

Intermec EasyCoder 501 SA Bedienungsanleitung

Intermec

Intermec PM4I Bedienungsanleitung

Intermec

Intermec PB3 Series Bedienungsanleitung

Intermec

Intermec EasyCoder 7422 Bedienungsanleitung

Intermec

Intermec PB50 Bedienungsanleitung

Intermec

Intermec 6820 Series Bedienungsanleitung

Intermec

Intermec EasyCoder PD41 Bedienungsanleitung

Intermec

Intermec EasyCoder PL4 Bedienungsanleitung

Intermec

Intermec 4400 Bedienungsanleitung

Intermec

Intermec PW50 Bedienungsanleitung

Intermec

Intermec PB50 Bedienungsanleitung

Intermec

Intermec PB21 Bedienungsanleitung

Intermec

Intermec EasyCoder 4420 Bedienungsanleitung

Intermec

Intermec EasyCoder C4 Bedienungsanleitung

Intermec

Intermec PF8D Bedienungsanleitung

Intermec

Intermec PB31 Bedienungsanleitung

Intermec

Intermec EasyCoder PF4ci Montageanleitung

Intermec

Intermec EasyCoder 3400e Bedienungsanleitung

Intermec

Intermec 4820F Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Lexmark

Lexmark 1400 Series Handbuch

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Epson

Epson ET-7750 Betriebsanleitung

Canon

Canon CLBR 460ps Bedienungsanleitung

Eltron

Eltron P210 Guide Bedienungsanleitung

Ricoh

Ricoh MD-P1 Bedienungsanleitung

Epson

Epson SC-F7100 series Bedienungsanleitung

Epson

Epson Stylus C40UX Bedienungsanleitung

Canon

Canon imagePASS-A2 Bedienungsanleitung

Canon

Canon S820D Bedienungsanleitung