Intermec PM4I Bedienungsanleitung

Page 1 4/13/2012

[RFID Movement]

[User Manual for Printing Labels]

[1.3]

[RFID Movement]

Page 2 4/13/2012

Table of Contents

Safety Summary................................ 3

Introduction....................................... 4

Media Load –Peel Off ..................... 5

Program Usage.................................. 8

Glossary .......................................... 13

Works Cited .................................... 14

Page 3 4/13/2012

Safety Summary

Intermec assumes no responsibility regarding the CE Directive if

the printer is handled, modified, or installed in any way other than

that described in Intermec’s manuals.

• Read this manual carefully before connecting the printer.

• Moving parts are exposed when the side doors are open, so

ensure that the doors are closed before you operate the printer.

• Do not open the front/left-hand cover. Dangerous voltage!

• Do not remove the bottom plate. Dangerous voltage!

• Do not put your fingers inside the print mechanism when the

power is on.

• Make sure that the side door cannot unintentionally swing down

when you have your fingers or hands inside the media

compartment. Risk of injury because of the weight of the side

door!

• Place the printer on an even surface which can support its weight

of approximately 13.5 kg (30 pounds) plus supplies.

• Do not spray the printer with water. If you are using a hose to

clean the premises in an industrial environment, remove the printer

or protect it carefully from spray and moisture.

• Carefully read the warning text on the envelope before using a

cleaning.

(Intermec)

Page 4 4/13/2012

Introduction

The following is a user’s manual for the purpose of printing

RFID labels with an Intermec PM4I label printer using Seagull

Scientific Bartender Software.

Page 5 4/13/2012

Media Load –Peel Off

The EasyCoder PM4i can print on labels, tickets, tags, and

continuous stock in various forms. This section describes the case

when self-adhesive labels are separated from the liner immediately

after printing, which requires optional integral self-strip unit with

liner take-up. This is also known as “Self-strip” operation.

Peel-off operation cannot be performed when an optional fan-fold

guide fitted. Peel-off can only be used for:

• Self-adhesive labels with liner, an optional label-taken sensor can

hold the printing of the next label in a batch until the present label

has been removed.

Note: Save the label indicating the sensitivity number attached to

the media roll. You will need this number to set the media

sensitivity.

Note: Peel-off operation sets high demands on the media in regard

of label stiffness, release characteristics of the adhesive and liner,

resistance against electrostatic charging etc., so the labels will be

dispensed properly. Consult your media supplier or test the media

to ascertain that it is suitable for your application.

(Intermec)

Page 6 4/13/2012

Figure 1: Loading Tags Started

Figure 2: Loading Tags Continued

Page 7 4/13/2012

Figure 3: Finishing Loading Tags

(Intermec)

Page 8 4/13/2012

Program Usage

Step 1

Find the program icon (Bartender) on the desktop and double

click it to open up the printing software.

Figure 4: Program Icon

Page 9 4/13/2012

Step 2

The user is presented with a blank label format which they

have set up in advance; you must then click the print button in

the toolbar

Figure 5: Opening the Program

Page 10 4/13/2012

Step 3

When you select the print button, you will be prompted for the

product code of Field Aviation for part numbers which must

be input in the database prior to use.

Figure 6: Inputting Product Numbers

Andere Handbücher für PM4I

Inhaltsverzeichnis

Andere Intermec Drucker Handbücher

Intermec

Intermec EasyCoder 501 SA Bedienungsanleitung

Intermec

Intermec EasyCoder 4420 Bedienungsanleitung

Intermec

Intermec PW40A Bedienungsanleitung

Intermec

Intermec PM4I Bedienungsanleitung

Intermec

Intermec EasyCoder PC4 Bedienungsanleitung

Intermec

Intermec EasyCoder F4 Bedienungsanleitung

Intermec

Intermec PB3 Series Bedienungsanleitung

Intermec

Intermec PW50 Bedienungsanleitung

Intermec

Intermec EasyCoder 101 Bedienungsanleitung

Intermec

Intermec PC23 Bedienungsanleitung

Intermec

Intermec EasyLan AW02 Bedienungsanleitung

Intermec

Intermec PB3 Series Bedienungsanleitung

Intermec

Intermec EasyCoder PD42 Bedienungsanleitung

Intermec

Intermec EasyCoder 4420 Bedienungsanleitung

Intermec

Intermec PB21 Bedienungsanleitung

Intermec

Intermec PB3 Series Bedienungsanleitung

Intermec

Intermec 3440 Bedienungsanleitung

Intermec

Intermec EasyCoder 601XP Bedienungsanleitung

Intermec

Intermec PB40A Bedienungsanleitung

Intermec

Intermec PR2 Bedienungsanleitung

Intermec

Intermec 4630 Bedienungsanleitung

Intermec

Intermec EasyCoder 7421 Handbuch

Intermec

Intermec EasyCoder PD41 Leitfaden

Intermec

Intermec EasyCoder F2 Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Lexmark

Lexmark 1400 Series Handbuch

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Epson

Epson ET-7750 Betriebsanleitung

Canon

Canon CLBR 460ps Bedienungsanleitung

Eltron

Eltron P210 Guide Bedienungsanleitung

Ricoh

Ricoh MD-P1 Bedienungsanleitung

Epson

Epson SC-F7100 series Bedienungsanleitung

Epson

Epson Stylus C40UX Bedienungsanleitung

Canon

Canon imagePASS-A2 Bedienungsanleitung

Canon

Canon S820D Bedienungsanleitung