Interpack ETII+ LD Bedienungsanleitung
1
HSD2000 ET II
LD
OPERATION MANUAL & PARTS LISTS
2” (48mm) & 3” (72mm)
This Manual Covers Tape Heads with the Serial Numbers Starting with:
H178 or H678
For All Other Numbers, Please Contact Customer Service @ 800-474-827 (Menu #3)
USER MANUAL
ETII+ LD
For Serial Numbers:
H278 and H778 XX X XXX
REV 2 10122022
REV 2 10122022
UH178TW / UH678TW UDH178-01
2
REVISION CONTROL
REVISION CONTROL
REV00 Initial Release
REV01 Updated
UH178TW / UH678TW UDH178-01
3
TABLE OF CONTENTS
Section 1 HHHTUTUTUTable Of ContentsUUUTTTHHH---------------------------------------------------3
Section 2 HHHTUTUTUTechnical AssistanceUUUTTTHHH-----------------------------------------------4
Section 3 HHHTUTUTUWarrantyUUUTTTHHH---------------------------------------------------------------5
Section 4 HHHTUTUTUDescription Of Tape HeadUUUTTTHHH---------------------------------------- 6
Section 5 HHHTUTUTUSafety IssuesUUUTTTHHH--------------------------------------------------------- 7
Section 6 HHHTUTUTUSpecificationsUUUTTTHHH---------------------------------------------------------10
HHHTUTUTUTape Head DimensionsUUUTTTHHH--------------------------------------------10
HHHTUTUTUTape Head ComponentsUUUTTTHHH------------------------------------------ 11
HHHTUTUTUTape Head SpecificationsUUUTTTHHH-----------------------------------------12
Section 7 HHHTUTUTUSet Up ProceduresUUUTTTHHH--------------------------------------------------13
HHHTUTUTUMounting AdaptersUUUTTTHHH--------------------------------------------------14
HHHTUTUTUTape LoadingUUUTTTHHH---------------------------------------------------------15
HHHTUTUTUTape ThreadingUUUTTTHHH------------------------------------------------------16
HHHTUTUTUTape CenteringUUUTTTHHH------------------------------------------------------ 18
HHHTUTUTUTape Leg Length AdjustmentUUUTTTHHH-------------------------------------19
HHHTUTUTUOne Way Clutched Roller AdjustmentUUUTTTHHH------------------------- 20
HHHTUTUTUMain Spring AdjustmentUUUTTTHHH------------------------------------------- 20
HHHTUTUTUMandrel Tension AdjustmentUUUTTTHHH-------------------------------------21
Section 8 HHHTUTUTUTroubleshootingUUUTTTHHH------------------------------------------------------22
Section 9 HHHTUTUTURecommended Spare Parts ListUUUTTTHHH---------------------------------25
Section 10 HHHTUTUTUPreventive MaintenanceUUUTTTHHH-------------------------------------------27
HHHTUTUTUKnife Blade ReplacementUUUTTTHHH----------------------------------------- 27
HHHTUTUTUOiler Pad LubricationUUUTTTHHH----------------------------------------------- 28
HHHTUTUTUUrethane Wipe Down Roller ReplacementUUUTTTHHH------------------- 29
HHHTUTUTUSpring ReplacementsUUUTTTHHH---------------------------------------------- 30
HHHTUTUTUWipe Down Brush ReplacementUUUTTTHHH---------------------------------37
HHHTUTUTUSchedule Of Preventive MaintenanceUUUTTTHHH--------------------------38
Section 11 HHHTUTUTUAppendix A-Illustrations And Parts ListsUUUTTTHHH-----------------------39
UH178TW / UH678TW UDH178-01
4
TECHNICAL ASSISTANCE
Technical Support
This is the Interpack Model HSD 2000-ET II Series LD Tape Head you ordered. It has been
set up and tested in our factory with Intertape brand tapes. If any problems occur when setting
up or operating this equipment, please contact the authorized distributor from where you
purchased this item.
Should you need to contact Interpack Technical Support, please have the Tape
Head UUUmodel number and serial numberUUU available. This information can be found on the
nameplate of the side panel of the tape head. Interpack Technical Support is available during
normal business hours (Eastern Time).
UUUPHONEUUU 1-800-972-4675
If you have a technical question that does not require an immediate response, you may
contact Interpack by fax.
UUUFAXUUU 1-800-462-1293
Replacement Parts
Order parts by UUUitem numberUUU, UUUpart nameUUU and UUUquantity requiredUUU. Replacement parts are
only available from your Authorized Interpack Distributor exclusively.
Should you require assistance selecting the correct part, you may call:
Intertape Polymer Group
Interpack Machinery
9940 Currie Davis Drive, Suite 23B
Tampa, FL, 33619
Tel: 1-800-972-4675
Fax: 1-813-621-8449
MODEL:
SERIAL NUMBER:
DISTRIBUTOR PURCHASED FROM:
DATE OF PURCHASE:
UH178TW / UH678TW UDH178-01
5
WARRANTY
EQUIPMENT WARRANTY AND LIMITED REMEDY: The following warranty is made in lieu of all other
warranties, express or implied, including, but not limited to, the implied warranty of
merchantability, the implied warranty of fitness for a particular purpose, and any implied
warranty arising out of a course of dealing, a custom or usage of trade:
Intertape sells its Interpack Tape Heads, Case Tapers and Case Erectors with the following warranties:
1. The HSDPPP
PPP 2000 Tape Heads' knife blades, springs and wipe down rollers will be free from all
defects for a period of ninety (90) days.
2. All other HSDPPP
PPP 2000 Tape Head parts will be free from all defects for one (1) year after delivery.
3. Water Activated Tapers’ blades and brushes will be free from defects for ninety (90) days after
delivery
4. Drive Belts will be free from defects for ninety (90) days after delivery
5. The Gear Motors will be free from defects for one (1) year after delivery.
6. All other components will be free from defects for one (1) year after delivery.
If any part is proven defective within its warranty period, then the exclusive remedy and
Intertape's and the seller's sole obligation shall be, at Intertype’s option, to repair or replace
the part, provided the defective part is returned immediately to Intertape's factory or an
authorized service station designated by Intertape.
A part will be presumed to have become defective after its warranty period unless the part is
received or Intertape is notified of the problem no later than five (5) calendar days after the
warranty period.
If Intertape is unable to repair or replace the part within a reasonable time, then Intertape, at its
option, will replace the equipment or refund the purchase price. Intertape shall have no
obligation to install the repaired or replacement part.
Intertape shall have no obligation to provide or pay for the labor required to install the repaired
or replacement part. Intertape shall have no obligation to repair or replace (1) those parts
failing due to: operator misuse, carelessness, or due to any accidental cause other than
equipment failure, or (2) parts
1. Failure or damage is due to misapplication, lack of proper maintenance,
abuse, improper installation or abnormal conditions such as temperature,
moisture, dirt or corrosive matter, etc.
2. Failure due to inadequate cleaning, improper operating environment, improper
utilities or operator error.
3. Failure due to operations above the rated capacities, or in any other improper
manner, either intentional or otherwise.
4. Failure is due to equipment, which has been altered by anyone other than an
authorized representative of Intertape Polymer Group.
5. Failure is due to an attempt by the purchaser to correct alleged defective
equipment. In this event the purchaser is responsible for all expenses
incurred.
LIMITATION OF LIABILITY: Intertape and seller shall not be liable for direct, indirect, special,
incidental or consequential damages based upon breach of warranty, breach of contract,
negligence, strict liability or any other legal theory.
The foregoing Equipment Warranty and Limited Remedy and Limitation of Liability may be
changed only by written agreement signed by authorized officers of Intertape and seller.
UH178TW / UH678TW UDH178-01
6
D
ESCRIPTION OF
T
APE
H
EAD
Figure 4-1
The Intertape HSD 2000-ET II Family of Tape Heads are designed to apply Intertape brand
pressure sensitive carton sealing tape to the top and bottom center seam of regular slotted
corrugated cartons.
This HSD 2000-ET II LD is designed to upgrade Little David® case sealers. No adapter kits
are needed to install this tape head into Little David® case sealers.
UH178TW / UH678TW UDH178-01
7
SAFETY ISSUES
There is a safety label used on all Interpack Tape Heads. This label is placed on the Tape
Head knife guard to warn operators and service personnel of the sharp cutting edge of the
blade. Please read the label and the following safety precautions before using the Tape Head.
Read this manual for other important safety operating and service information.
Only trained personnel are to operate and service Tape Head.
Wear safety glasses.
Shut off power to machine before adjusting.
Unplug electrical power before servicing.
All covers and guards must be in place before operating.
Stay clear of moving parts which can shear and cut.
Never operate the Tape Heads with the Knife Guard removed.
Turn electrical supply off before servicing the Tape Heads, including tape
loading and threading.
Note: Should any of the safety labels placed on the Tape Head be
damaged or destroyed, replacements are available.
UH178TW / UH678TW UDH178-01
8
S
AFETY
I
SSUES
The illustrated label shown in Figure 5-1 is
attached to the Knife Guard. The label
warns operators and service personnel of
the very sharp blade. The guard shall only
be removed when the torsion spring or the
guard itself is being replaced.
Should the tape head be operated without
blade guard, user voids all warranty
implied, the manufacturer bears no
responsibility for the consequences.
Tape head shall never be serviced while
mounted in a machine.
Figure 5-1
Label on Figure 5-2 is visible on carton
sealing machine.
Figure 5-2
While the tape head is processing cartons,
or it is in motion, keep your hands away
(Figure 5-3).
Figure 5-3
UH178TW / UH678TW UDH178-01
9
The illustrated label shown in Figure 5-4 is
attached to the operator side plate of each
tape head. The label provides operators
and service personnel the proper method of
threading a new roll of tape through the tape
head.
More detailed information is provided in the
“Set Up Procedures” portion of this manual.
Turn air and electrical supplies off before
servicing the tape heads.
ROLLER
GUIDE
ROLLER
CLUTCH
APPLICATION
TAPE GUIDE
ROLLER
SHOE
GUIDE
ROLLER
ADHESIVE SIDE
TAPE ROLL
GUIDE
ROLLER
PEEL OFF ROLLER
Figure 5-4
UH178TW / UH678TW UDH178-01
10
S
PECIFICATIONS
UUU
Tape Head Dimensions
Figure 6-1
Inhaltsverzeichnis
Andere Interpack Industrieanlagen Handbücher
Interpack
Interpack USA 2024-SB Bedienungsanleitung
Interpack
Interpack HSD2000 ET II RC Bedienungsanleitung
Interpack
Interpack RSA 20-B Bedienungsanleitung
Interpack
Interpack USA 2024-SB DH Bedienungsanleitung
Interpack
Interpack HSD2000 XS II Series Bedienungsanleitung
Interpack
Interpack ipg RSA 2625-TB Bedienungsanleitung
Interpack
Interpack CE-12P Bedienungsanleitung
Interpack
Interpack CE-12P Bedienungsanleitung
