Interquartz Enterprise 98393 HS Bedienungsanleitung
21
OPERATING INSTRUCTIONS
Headset Speakerphone
1
Contents
1. Important Notes...................................................................... 2
Intended use...............................................................................................2
Telephone facilities .....................................................................................2
REN number...............................................................................................3
Emergency calls .........................................................................................4
2. Installation .............................................................................. 5
Connection .................................................................................................5
Wall mounting.............................................................................................5
3.Telephone Features................................................................ 7
4. Operation .............................................................................. 11
5. PABX & System Usage ........................................................ 14
6. Maintenance and Problem Solving..................................... 16
7.Warranty and Service........................................................... 17
Figure 1 Wall Mounting.............................................................................5
Figure 2 Handset Retainer for Wall Mount................................................6
Figure 3 General Appearance ..................................................................7
Figure 4 Bottom View ...............................................................................9
Figure 5 Recall Switch............................................................................14
2
1. Important Notes
Intended use
This apparatus is intended for use on 2 wire analogue PSTN and PABX circuits
within Europe.
Declaration of Conformity
Interquartz UK) Limited declares under its sole responsibility that this
product
Model: Enterprise Headset Speakerphone
Is in conformity with the following relevant harmonized standards
Health & Safety 73/23/EEC
Electromagnetic Compatibility EN55022 :1998 & EN55024 : 1998
Telecom TBR21 : 1998 & TBR38 : 1998
Following the provisions of Council Directive on radio equipment and tele-
communications terminal equipment.
January 2001
Telephone facilities
This telephone has been designed for the use of the following facilities :
manual or handsfree dialling
headset port
recall earth or timed break switchable)
MF signalling
ringer indicator
3
ringer volume control
ringer pitch adjust
redial / pause
mute function with LED indicator
line powered
triple standard message waiting
high voltage, reverse polarity + voltage drop)
20 memories accessed via 10 memory button 10 one touch and 10 two
touch memories)
EEprom lockable memories EEprom memory selector underneath memory
card)
inductive loop hearing aid compatible
desk or wall mountable no bracket required)
REN number
The REN number of this telephone is 1.
If you wish to connect any other equipment to the line, simply add the REN
numbers of each piece together and ensure that the total does not exceed 4.
If too many phones are connected to the line, the circuit may be overloaded
and your telephone may not ring.
Not all telephones have the same REN.
If a British Telecom phone is supplied unmarked, you can assume that it has
a REN of 1
4
Emergency calls
Calls can be made on this telephone to contact the emergency services. An
access code may also be required, if the phone is connected to a PABX. The
European code for emergency services is 112, however, you can still use 999
in the UK.
5
2. Installation
This telephone is designed to plug straight into a modular style socket. If you
do not have one of these sockets, they can be obtained from your Network
Supplier.
Connection
Insert the line cord into the socket. Set the ringer volume and pitch control as
desired.
Wall mounting
Using the template supplied, position the telephone where you want to wall
mount. Drill two holes and fix round headed screws, leaving them slightly proud
of the surface. Position the telephone over the screws and slide downwards
into place.
FOR WALL MOUNT
Figure 1
Wall Mounting
6
To enable the handset to be supported in the cradle when the phone is mounted
on the wall, follow the procedure shown in Figure 2 to reserve the HANDSET
RETAINER.
2. Push the HANDSET RETAINER
out of the slot
1.Use your thumb to press the
HANDSET RETAINER
4.Insert the HANDSET RETAINER
back into it's slot
3.Turn the HANDSET
RETAINER 180.
Figure 2
Handset Retainer for Wall Mounting
7
3. Telephone Features
To help you find your way round the telephone, various features and buttons
are briefly described below. You should refer to the relevant section of this user
guide to learn how to use the features available.
Store Button
Used to store numbers into the direct access memory buttons.
Figure 3
General Appearance
MEMORY KEYS
KEYPAD
SPEAKER VOLUME
CONTROL SWITCH
STORE BUTTON HANDSFREE/ HEADSET MUTE BUTTON RECALL BUTTON REDIAL / PAUSE BUTTON
BUTTON (with LED Indicator)
(with LED Indicator)
HANDSET
HANDSET
CORD
RINGER INDICATOR
(message wait)
RESET BUTTON
(underneath memory card)
EEPROM MEMORY SELECTOR
(P, P+U, U) undernearth memory card
8
Handsfree Headset button
The function of this button is determined by the position of the HS/HF switch
underneath the telephone see section 4).
With the switch set of HF handsfree) then pressing this button switches the
speakerphone mode on or off. The LED above the button glows when the
speakerphone is on.
With the switch set to HS headset), then pressing this button transfers an
incoming call directly to the headset. The red LED glows for the duration of the
call which is terminated by pressing this button once more.
9
Ringer Indicator
Flashes when the telephone rings with an incoming call or with a message
waiting signal See PABX section).
Ringer Volume Switch
Located on the base of the unit see Figure 4). Move switch to select no sound
OFF), muted sound LOW) or full sound HIGH) for ringing on incoming call.
Ringer Pitch Control
On the base of the unit. Allows the pitch of the ringer to be altered from a high
pitch to a low pitch.
RINGER PITCH
SWITCH
TIMED BREAK /
EARTH RECALL
(ER, TBR) SWITCH
Figure 4
Bottom View
RINGER
HI / LO / OFF
SWITCH
HANDSFREE / HEADSET
(HF/HS) SWITCH
VOICE MESSAGING
(N / S2 / S1) SWITCH
Andere Handbücher für Enterprise 98393 HS
1
Inhaltsverzeichnis
Andere Interquartz Telefon Handbücher
Interquartz
Interquartz Discovery CLI 9859 Bedienungsanleitung
Interquartz
Interquartz 9310 Bedienungsanleitung
Interquartz
Interquartz Basic Phone 98380 XWA Bedienungsanleitung
Interquartz
Interquartz IQ350 Bedienungsanleitung
Interquartz
Interquartz Voyager 9281 Bedienungsanleitung
Interquartz
Interquartz Gemini 9335 Bedienungsanleitung
Interquartz
Interquartz Enterprise 98390 Bedienungsanleitung
Interquartz
Interquartz IQTEL500 Bedienungsanleitung
Interquartz
Interquartz E2 Bedienungsanleitung
Interquartz
Interquartz 9310 Bedienungsanleitung
Interquartz
Interquartz Voyager 9281P Betriebsanleitung
Interquartz
Interquartz IQ750 Bedienungsanleitung
Interquartz
Interquartz Hotline 9826N Bedienungsanleitung
Interquartz
Interquartz Voyager 9281 Bedienungsanleitung
Interquartz
Interquartz Enterprise 98393 HS Bedienungsanleitung
Interquartz
Interquartz Memory Phone 9825 Bedienungsanleitung
Interquartz
Interquartz Voyager 9825 Bedienungsanleitung
Interquartz
Interquartz Gemini Basic Bedienungsanleitung
Interquartz
Interquartz IQ560E Bedienungsanleitung
Interquartz
Interquartz Voyager 9283 Bedienungsanleitung
