Invacare Rea Dahlia 45 Bedienungsanleitung

How to exchange the front linkarm at Dahlia 45° (gas spring)

Rea

Dahlia 45°

Invacare France Operations SAS

Route de St Roch

37230 Fondettes France

587799

201

Previously leave the chair on its wheels and tilt the chair to

unloaded position (about 5°)

1. Remove the upper safety pin

and locking washer

the gas spring. Tooling: Use a nipper

4. Remove the 4 linkarm screws

. If needed heat the nuts

with a hot air gun before untightening the linkarm screws

. While heating the nut place a sight counterclockwise

torque to the screw

and stop warming immediately when

the screw starts to turn.

Tooling: Use a hot air gun and Allen key of 6 mm

2. Tilt the chair to a seat angle of 30° to 45°

3. Remove the upper safety pin

and locking washer

the gas spring. Tooling: Use a nipper

5. Scrap the previous plastic bushings and screws

6. Use new screws and plastic bushings when assembling the

new linkarm.

Tighten the screws with a torque wrench to 17 Nm.

Tooling: Use a torque wrench

7. Reverse the procedure to reassemble the gas spring. Check

the upper and lower safety pins

and locking washers

If damage then replace them by new ones.

Tooling: Use a nipper

How to exchange the front linkarm at Dahlia 45°

(seat electrical actuator only)

Rea

Dahlia 45°

Invacare France Operations SAS

Route de St Roch

37230 Fondettes France

587799

201

Previously leave the chair on its wheels and tilt the chair to

unloaded position (about 5°)

1. Remove the upper safety pin

locking washer

and

spacer

of the seat electrical actuator.

Tooling: Use a nipper

Tilt the chair to a seat angle of

30° to

45°

3. Remove the 4 linkarm screws

. If needed heat the nuts

with a hot air gun before untightening the linkarm screws

. While heating the nut place a sight counterclockwise

torque to the screw

and stop warming immediately when

the screw starts to turn.

Tooling: Use a hot air gun and Allen key of 6 mm

4. Scrap the previous plastic bushings and screws

5. Use new screws and plastic bushings when assembling the

new linkarm.

Pay attention to the way of the actuator cable.

Tighten the screws with a torque wrench to 17 Nm.

Tooling: Use a torque wrench

6. Reverse the procedure to reassemble the electrical

actuator. Check the upper and lower safety pins

and

locking washers

. If damage then replace them by new

ones.

ooling:

Use a nipper

Andere Invacare Rollstuhl Handbücher

Invacare

Invacare Aquatec Ocean VIP Bedienungsanleitung

Invacare

Invacare Aquatec Ocean Bedienungsanleitung

Invacare

Invacare Matrx ELITE E2S Bedienungsanleitung

Invacare

Invacare Arrow FWD Bedienungsanleitung

Invacare

Invacare Arrow 4M900 Bedienungsanleitung

Invacare

Invacare Pronto M71 Base Handbuch

Invacare

Invacare Cushion Rigidizer Bedienungsanleitung

Invacare

Invacare PHOENIX Bedienungsanleitung

Invacare

Invacare Tracer SX Handbuch

Invacare

Invacare SpinX Bedienungsanleitung

Invacare

Invacare Storm 4 Max Bedienungsanleitung

Invacare

Invacare Alu Lite Bedienungsanleitung

Invacare

Invacare Pronto M41 Bedienungsanleitung

Invacare

Invacare Aquatec Ocean Ergo Bedienungsanleitung

Invacare

Invacare Formula Powered Seating Handbuch

Invacare

Invacare AVIVA FX Series Bedienungsanleitung

Invacare

Invacare Aquatec Sansibar Bedienungsanleitung

Invacare

Invacare Pronto Air Bedienungsanleitung

Invacare

Invacare STORM Bedienungsanleitung

Invacare

Invacare Azalea Assist Bedienungsanleitung

Invacare

Invacare TDX SP Bedienungsanleitung

Invacare

Invacare 9000 Topaz Bedienungsanleitung

Invacare

Invacare Kiwi Lite Bedienungsanleitung

Invacare

Invacare rea Azalea Series Bedienungsanleitung

Beliebte Rollstuhl Handbücher anderer Marken

Otto Bock

Otto Bock Skippi plus Bedienungsanleitung

SORG

SORG LoopSORG 802 Bedienungsanleitung

Designability

Designability WizzyBug Montageanleitung

Vermeiren

Vermeiren RAPIDO Bedienungsanleitung

Excel

Excel G5 KIDS 0285 Bedienungsanleitung

M. Bartels

M. Bartels SA-3 Bedienungsanleitung

Vermeiren

Vermeiren Turios Bedienungsanleitung

nino robotics

nino robotics NIno Bedienungsanleitung

Nova

Nova TKW-12 Bedienungsanleitung

BCW

BCW Advantage Bedienungsanleitung

You-Q

You-Q Luca Bedienungsanleitung

interco

interco Ortolight Standard Bedienungsanleitung

Nova

Nova 7190L Bedienungsanleitung

Vermeiren

Vermeiren EZ1 Bedienungsanleitung

PaceSaver

PaceSaver Scout M-300 Bedienungsanleitung

Drive Medical

Drive Medical Silver Sport SSP218DDA-SF Bedienungsanleitung

Rehadapt

Rehadapt Light 3D Bedienungsanleitung

Excel

Excel Mobil Bedienungsanleitung