INVENTOR PFVI32-09WF Bedienungsanleitung

MODELS/ΜΟΝΤΕΛΑ:

PFVI32-09WF/PFVO32-09

PFVI32-12WF/PFVO32-12

PFVI32-18WF/PFVO32-18

PFVI32-24WF/PFVO32-24

REMOTE CONTROLLER

AIR CONDITIONING SYSTEMS

• USER’S MANUAL

• ΕΓΧΕΙΡΙΔΙΟ ΧΡΗΣΗΣ

• MANUAL UTILIZATORULUI

ENGLISH | ΕΛΛΗΝΙΚΑ | ROMANA

Contents

Attention.....................................................................................................1

Function buttons .......................................................................................2

Remote controller (closed cover) ....................................................2

Remote controller (open cover).......................................................4

Use of Remote Control .............................................................................9

Insert/replace batteries............................................................................9

Automatic operation mode (AUTO) ................................................9

Cooling/Heating operation mode....................................................9

Fan operation Mode ........................................................................10

Dry operation mode ........................................................................10

1. Before any command from the remote controller, point the remote

controller’s signal transmitter towards the receiver of the air

conditioner.

2. The remote controller can operate in range of up to 8 meters from the

unit.

3. Please ensure that there are no obstacles between the remote

controller and unit.

4. Do not hit, drop or throw the remote controller.

5. Do not leave the remote controller under direct sunlight, or near

heating sources.

6. Please ensure that you use two AAA batteries of the same type.

7. Do not use rechargeable batteries.

8. Do not mix used batteries with new.

9. Always remove the batteries from the remote controller before long-

term without use.

10. If there is no sound of received command from the remote controller

/ unit and there is no indication of communication between remote

controller and unit, please replace the batteries with two new of same

type.

11. If the remote controller’s display resets when a button is pressed,

please replace the batteries with two new of same type.

12. Always properly discard used batteries.

Note:

All the pictures in the manual are for explanatory purposes only.

The actual shape of the unit you purchased may be slightly dierent

(depending on the model).

Cooling-only units do not have the function of E-heating or electric

heating. If selected on the remote controller, the unit will not start

that operation. Please don’t turn the remote controller to such

buttons.

Attention

Function buttons

Signal transmitter

Remote controller (closed cover)

Note:

You can operate the buttons on the cover only when the cover is closed.

1. “ON/OFF” button

Press the ON/OFF button to start or stop the unit.

By turning o the unit, functions of Timer and Sleep are deactivated as

well.

2. “SPEED” button

Press the SPEED button to select the fan speed.

Fan speed setting will change as follows:

3. / buttons

Press the button to increase the setting temperature by 1°C.

Press the button to decrease the setting temperature by 1°C.

The temperature can be changed quickly by pressing the button

continuously.

Setting temperature range is 16oC ~ 32oC.

4. “COOL” button

Press the COOL button, the mode of operation is shifted to cooling.

5. “HEAT” button

Press the HEAT button, the mode of operation is shifted to heating.

Note: cooling only unit has no heating function

6. “SWING” buttons (SWING and SWING )

Press the buttons to activate the corresponding swing function (up/

down or left/right). To deactivate the corresponding swing function,

press the button again.

Up/down (left/right) has memory function per operation mode and will

remain if you stop and start the unit.

When selecting the Swing setting for the current operation mode, the

other modes’ swing settings will not be aected.

Function buttons

Signal transmitter

Remote controller (open cover)

Open it from

left to right

1. “ON/OFF” button

Press the ON/OFF button to start or stop the unit.

By turning o the unit, functions of Timer and Sleep are deactivated as

well.

2. “MODE” button

Press the MODE button to select the operation mode

The operation mode will change as below:

Note: cooling-only units have no heating function

3. “SPEED” button

Press the SPEED button to select the fan speed.

Fan speed setting will change as follows:

4. “TURBO” button

Press the TURBO button to activate the turbo function for the fan

speed of the unit. The TURBO indication on the remote controller will

light. Press again to deactivate the turbo function.

Turbo function can only be set during cooling or heating modes of

operation.

5. “SILENCE” button

Press the SILENCE button to activate the silent function.

The SILENCE (SILE) indication on the remote controller will light. Press

again to deactivate the silent function.

6. “TIMER” button

While the unit is operating, you can press the TIMER button to set the

TIMER OFF function. The TIMER OFF function allows you to set the

amount of timer after which the unit will automatically turn o.

While the unit is deactivated, you can press the TIMER button to set

Buttons description

the TIMER ON function. The TIMER ON function allows you to set the

amount of timer after which the unit will automatically turn on.

After pressing this key once, the indications H and [ON or OFF

depending of setting] will start ashing on the remote controller’s

display. While the indicators are ashing, press buttons to adjust the

desired time (setting time range is from 0.5 to 24hr). Press the TIMER

button once again to complete the setting (the indications on the

controller’s display will stop ashing.

If no button is pressed for 10s while timer indicators are ashing, the

timer setting will quit.

You can deactivate a set timer setting by pressing TIMER button once.

7. “HEALTH” button

Press the HEALTH button to activate or deactivate the health function

(activates/deactivates the unit’s ionizer).

8. “SLEEP” button

Press the SLEEP button to activate or deactivate the sleep function

When selecting the Swing setting for the current operation mode, the

other modes’ swing settings will not be aected.

When sleep mode is activated, the unit will operate in sleep mode for

10 hours, after which it will continue the last set operation.

If TIMER OFF function has been also set, the unit will turn o

automatically according to set timer.

Note: if you press MODE or ON/OFF button, the sleep function will

deactivate.

9. “iFEEL” button

Press the iFEEL button to activate the iFEEL function. The display

will show the actual room temperature while the function is active

and the unit will operate according to the temperature reading near

the remote controller (requires the transmitter to point towards the

display). When function is deactivated, the display will show the setting

temperature. This function cannot be set while the unit operates at

FAN mode.

Buttons description

10. “DISPLAY” button

Press the DISPLAY button once to turn o the unit’s display. If

you press again, the display will ash for 5s then show ambient

temperature and setting temperature.

11. “iCLEAN” button

When the unit is deactivated, press the iCLEAN button to start the

iCLEAN function.

The iCLEAN function will start the unit under specic settings in order

to remove dust and remaining moisture from the evaporator. This

operation should be used often to prevent appearance of mold and

smells from residue buildup inside the unit.

After starting the iCLEAN function, you can press iCLEAN button or

ON/OFF button to quit it.

Note: This function does not substitute proper and regular cleaning

and maintenance of the unit.

12. “ELE.H” button (only for hot pump type).

While the unit is operating in heating mode, press the ELE.H button to

activate the supplementary electric heating.

13. “Anti-FUNGUS” button

The Anti-FUNGUS function can help prevent appearance of mold and

smells from residue buildup inside the unit.

To enable the activation of Anti-FUNGUS function, turn o the unit

and remote controller, point the controller to the unit’s display and

press and hold the Anti-FUNGUS button. The unit will beep 5 times

followed by another 5 beeps, indicating that you can use the Anti-

FUNGUS function. To disable the function, repeat the process above

(the unit will beep 5 times followed by another 3 beeps).

To activate/deactivate the Anti-FUNGUS function, press the Anti-

FUNGUS button once. This function can only be set while the unit

operates under cooling, dry and auto (cooling and dry) modes. The

function will force the unit to operate for 3 minutes under heating

mode (Fan mode for cooling-only units) with low fan speed.

Note: When this function is active, it is suggested to allow the

operation to complete.

Function buttons

14. “SPOT SWING” button

By pressing the SPOT SWING button, the horizontal louvers will swing

automatically.

Press it again to deactivate it.

15. “ECO” button

Press the ECO button to activate the economic operation of the unit.

While ECO function is activated, the unit will operate under specic

settings for optimal power consumption. The ECO function will

automatically deactivate after 8 hours.

You can press the ECO button again to manually deactivate the ECO

function.

If TIMER OFF function has been also set, the unit will turn o

automatically according to set timer.

Note: ECO function can only be activated under cooling operation

mode.

16. “iFavor” button

The iFavor button is a shortcut button. You can use the iFavor

function to save and quickly return to preferred settings of mode, fan

speed, set temperature and swing.

To save the preferred settings, while the unit is operating, select the

settings you want (mode, fan speed, set temperature, swing), then

press and hold the iFavor button for 3 seconds. The display will ash 3

times when the settings are saved.

The iFavor function can only have one saved setting at any time, if you

repeat the process above, the new settings will overwrite the previously

saved ones.

To activate the saved iFavor settings, while the unit is operating, press

once the iFavor button.

Andere Handbücher für PFVI32-09WF

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere INVENTOR Klimaanlage Handbücher

INVENTOR

INVENTOR AR2MVI32-12WiFi Bedienungsanleitung

INVENTOR

INVENTOR V4MCRI-18 Bedienungsanleitung

INVENTOR

INVENTOR P8MVI32-09WiFi Bedienungsanleitung

INVENTOR

INVENTOR A2MVO-09 Bedienungsanleitung

INVENTOR

INVENTOR P8MVO32-09 Bedienungsanleitung

INVENTOR

INVENTOR K2VO32-09 Leitfaden

INVENTOR

INVENTOR AR3VO32-09 Bedienungsanleitung

INVENTOR

INVENTOR V4MVO-09 Bedienungsanleitung

INVENTOR

INVENTOR V2MC I-24 Bedienungsanleitung

INVENTOR

INVENTOR COOL/FCOOL-8BS Bedienungsanleitung

INVENTOR

INVENTOR EVI-09 Bedienungsanleitung

INVENTOR

INVENTOR V4MCI-24UR Bedienungsanleitung

INVENTOR

INVENTOR CR2VO32-18 Bedienungsanleitung

INVENTOR

INVENTOR O2MVI-09WiFiR/O2MVO-09 Bedienungsanleitung

INVENTOR

INVENTOR EVI-09 Bedienungsanleitung

INVENTOR

INVENTOR V3MFI-24 Bedienungsanleitung

INVENTOR

INVENTOR P9VO32-09 Bedienungsanleitung

INVENTOR

INVENTOR NUVI-09WF Bedienungsanleitung

INVENTOR

INVENTOR APSI-30 Bedienungsanleitung

INVENTOR

INVENTOR V4MVI-12WFR Bedienungsanleitung

INVENTOR

INVENTOR P7MVI-18WiFi Bedienungsanleitung

INVENTOR

INVENTOR AR5VI-12WFI/AR5VO-12 Bedienungsanleitung

INVENTOR

INVENTOR B2VI-18 Bedienungsanleitung

INVENTOR

INVENTOR U2 MRS-24 Bedienungsanleitung

Beliebte Klimaanlage Handbücher anderer Marken

Spheros

Spheros CC 355 Bedienungsanleitung

Bosch

Bosch Climate 5000 SCI 24 CAS/ OU- OUE Bedienungsanleitung

Panasonic

Panasonic CS-E12HKEW Bedienungsanleitung

nedis

nedis ACMB1WT7 Bedienungsanleitung

Samsung

Samsung AR KV Series Leitfaden

Daikin

Daikin FCFV50A Bedienungsanleitung

Fujitsu

Fujitsu Inverter ASBA30JFC Bedienungsanleitung

Toshiba

Toshiba RAS-M10SMUV-E Bedienungsanleitung

Daikin

Daikin FXLQ20MAVE Bedienungsanleitung

Hitachi

Hitachi RAS-E24CAK Bedienungsanleitung

CIAT

CIAT Magister 2 Series Leitfaden

Bestron

Bestron AAC6000 Bedienungsanleitung

Hisense

Hisense 7K Technisches Handbuch

Frigidaire

Frigidaire FFRE0533S1E0 Bedienungsanleitung

Samsung

Samsung AS09HM3N Bedienungsanleitung

Frigidaire

Frigidaire CRA073PU11 Betriebsanleitung

Soleus Air

Soleus Air GB-PAC-08E4 Bedienungsanleitung

McQuay

McQuay MCK020A Bedienungsanleitung