Inventus Power PROTRXion S-12V100-TRX-HD Bedienungsanleitung

inventuspower.com

[email protected]

+1 877.423.4242

Inventus Power, Inc.

1200 Internationale Parkway

Woodridge, IL 60517

Designed & Manufactured by

PROTRXion™

Battery User Manual

S-12V100-TRX-HD

PROTRXion™ Battery User Manual

Applicable Models

Document Information

Environmental Regulations

The battery pack is compliant with the following environmental regulations:

• EU Directive 2002/95/EC for Restriction of Hazardous Substances (RoHS)

• EU Directive 2006/66/EC on batteries and accumulators and waste batteries and accumulators

• EU Directive 1907/2006 on the Registration Evaluation Authorization and Restriction of

Chemicals (REACH)

• Management Methods for Controlling Pollution Caused by Electronic Information Products

Regulation (China RoHS)

Model Part No. (NMEA 2000)

S-12V100-TRX-HD (w/out heater) 59096-001

Release Date Revision Scope of Change

2023-08-01 V1.5 Minor edits to version 1 release

PROTRXion™ Battery User Manual

DOCUMENT NOTICE: The information contained in this manual is the property of Inventus Power

and is subject to change without notice. Inventus Power reserves the right to make changes in

the design of its products or components as progress in engineering and manufacturing may

warrant. It is the customer’s responsibility to satisfy itself as to whether the information contained

herein is adequate and sucient for a user’s particular use. It is the further responsibility of

each user to ensure that all applications of Inventus Power products are appropriate and safe

based on conditions anticipated or encountered during use. This document does not create

any additional obligation for Inventus Power and does not constitute additional warranties and

representations.

Technical Support: For any issues, please email tech_support@inventuspower.com

Inventus Power® and PROTRXion™ are trademarks of Inventus Power.

Please read all contents of this User’s Manual prior to the installation

of Inventus Power PROTRXion™ Batteries.

CANOpen Controller Area Network Bus communication CCCV Constant Current Constant Voltage

J1939 Higher-layer CANbus protocol for data logging OTC Over Temperature Charging

OCV Over Charge Voltage OTD Over Temperature Discharging

AFE Analog Front End TCO Thermal Cuto

BMS Battery Management System SOT Safety Over Temperature

CC Constant Current SOC State of Charge

CID Current Interrupt Device OCV Open Circuit Voltage

COV Cell Over Voltage RT Room Temperature

DOD Depth of Discharge Ah Ampere Hour

OCC Over Current Charge CUV Charge Under Voltage

LED Light Emitting Diode

Abbreviations

Contents

Abbreviations ................................................................................................................................ 3

Safety Information ....................................................................................................................... 5

Personal Protective Equipment / Installation Tools ........................................................... 6

Unboxing the Battery .................................................................................................................. 6

Mechanical Features .................................................................................................................... 7

Battery Serial Number Format ................................................................................................. 7

Product Dimensions .................................................................................................................... 7

Wake-Up & Ship Mode ................................................................................................................ 8

Selecting Power Cables .............................................................................................................. 9

Communication Cables ............................................................................................................... 9

Selecting a Battery Charger .................................................................................................... 10

Connecting the Battery ............................................................................................................. 11

Battery Terminal Torque Rating .............................................................................................. 11

Module Conﬁguration ................................................................................................................ 12

Communications .......................................................................................................................... 13

Pin Deﬁnition ............................................................................................................................... 14

Battery Modes............................................................................................................................... 15

Battery State of Charge Indicator .......................................................................................... 16

Disconnecting the Battery ........................................................................................................ 17

Battery Speciﬁcations ................................................................................................................ 17

Battery Performance Data ........................................................................................................ 18

Maintenance and Storage ......................................................................................................... 19

Transporting Lithium-ion Batteries ....................................................................................... 20

Emergency and First Aid Procedures ................................................................................... 22

Troubleshooting ......................................................................................................................... 23

Serial Number Record ............................................................................................................... 25

Warranty Violations ................................................................................................................... 26

Recycling ...................................................................................................................................... 27

Technical Support ...................................................................................................................... 27

DO DO NOT

Symbol Deﬁnition

Important safety information will follow.

DO NOT dispose of battery in ﬁre.

RECYCLE! Battery may require recycling in accordance with local laws. Regardless,

recycling is encouraged. Contact local regulatory authorities for more information.

DO NOT include battery with lead acid battery recycling.

DO NOT dispose of battery in the trash.

Shock Hazard - Labels may be located on or inside the equipment to alert people that

dangerous voltage may be present.

Burn Hazard - Labels may be located on or inside the equipment to alert people that

surface temperature may be dangerous.

• Always wear proper personal protective

equipment

• All installation should be performed by a

qualiﬁed service technician

• Use only insulative tools required for

assembly

• Dispose of the battery properly in

accordance with local, state, and federal

regulations

• Extinguish any ﬂames with a carbon

dioxide, dry- powder ﬁre extinguisher, and

cover with copious amounts of water

• Do not use with other types of batteries

connected with the PROTRXion™ products

• Do not short circuit the battery terminals

• Do not operate or store the battery beyond

the operating limits

• Do not over-charge or over-discharge the

battery

• Do not crush, puncture, or drop the battery

• Do not immerse battery in water

• Do not burn or expose battery to ﬁre

• Do not charge battery near ﬂammable

materials, liquids, and surfaces

• Do not alter, disassemble, modify, or open

battery

• Do not wear jewelry (i.e. rings, watches,

bracelets, necklaces) when handling or

working near the battery

• Do not lift battery by the terminal cables

• Do not operate if battery has been damaged

in any way during shipping

Safety Information

Personal Protective Equipment / Installation Tools

Before installation or maintenance of your batteries, the following equipment

is required:

• Rubber gloves

• Safety goggles or other eye protection

• Insulated Torque Wrench / Philips Screwdriver

• Voltmeter

Unboxing the Battery

Before You Start

Please read all the safety and warranty information provided in this document prior to installing

and/or operating the battery.

IMPORTANT: Remove all jewelry or other metallic objects from your hands and

body during the installation and removal of the battery packs and peripherals.

What’s in the Box?

• Inventus Power PROTRXion™ battery

• UNDOT 38.3 / IATA approved packaging

• QR Code Slip to access manuals, datasheets, and more supporting documents

• Signal connector dust cover (pre-installed on battery)

• Terminal bolts (pre-installed on battery)

• Protective battery terminal covers

Note: All power and signal cables must be purchased seperately.

Unpacking

• If possible, do not discard the packaging. This packaging is designed for the safe

transportation of lithium-ion batteries compliant with gloabl shipping regulations and can

be reused if the battery must be transported to a new location.

Visual Inspection

• Please inspect each battery carefully. Report any damage from shipping to Inventus Power

immediately.

Speciﬁcation S-12V100-TRX-HD

Length 297.0 ± 2.0mm

Width 175.5 ±1.5mm

Height 228.0 ± 2.0mm

Mechanical Features

S-12V100-TRX-HD

Battery Serial Number Format

F Factory Location (T: Tijuana, Mexico; Q: QingXi, China)

XXXXXXX SKU Part Number (Last 7 digits)

SSSSS Battery Serial Number (00001-65535)

YYDDD Mfg Date (Year, Day of the year)

Product Dimensions

# Description

1Negative Terminal

2Lift Strap

3Signal Connector

4Positive Terminal

5Battery State of Charge Indicator

3 41

Wake-Up & Ship Mode

Press the SOC button

for 5 seconds

TO WAKE UP THE BATTERY

TO PLACE IN SHIP MODE

We recommend to place the battery

in Ship Mode when it is not used to

prevent self-consumption current

drain and extend storage life.

Press the SOC button

for 20 seconds

Pin 1

Pin 5

INTLK

Pin 4

GND

Pin 3

WAKE

Battery can also receive a wake up signal

from the signal connector by shorting pin 4

(GND) to pin 5 (INTLK) to wake up battery

from Ship Mode.

Wake-Up

Connect pins 4 & 5

to exit Ship Mode

12 3 4 5 6 7 8

Selecting Power Cables

Choose the appropriate power cable size based on the system load requirements. Cables are

rated for copper conductor at conductor temperatures under 60°C (140°F) per the table below.

When connected in parallel conﬁguration, it is preferable for all cables to be the same length

and gauge.

Communication Cables

If your application requires communication, please connect a CAN cable to the battery signal

connector and respective system or chargers.

Item Mfg Part No. Cable Length Where to Purchase

Battery to NMEA 2000 Adapter 903-09518-001 152 mm (6”) Inventus Power

Copper Wire

Gauge (AWG)

Metric Wire

Cross-Section

(mm2)Ampacity (A)

14 2.08 15

- 2.5 21

12 3.31 20

- 4 26

10 5.26 30

- 6 34

8 8.37 40

- 10 46

6 13.30 55

- 16 61

4 21.15 70

- 25 80

2 33.62 95

-35 98

1 42.41 110

- 50 121

0 (1/0) 53.46 125

-70 156

00 (2/0) 67.40 145

-70 156

000 (3/0) 85.01 165

-95 187

Selecting a Battery Charger

Many types of lead acid chargers are compatible with our PROTRXion™ batteries and safely

charge in temperature ranges as shown in the table below. The charger maximum voltage output

should match the maximum charge voltage of the battery system and should not exceed charge

voltage as shown in the table below. It is recommended to charge the battery prior to installation.

Consult with Inventus Power for recommendation on selecting a battery charger.

After the charger has been selected, ﬁrst connect the (-) terminal to the battery, then the (+)

terminal. Once the terminals have been connected, connect the CAN communication to the

battery to optimize the charger performance (preferred chargers recommended by Inventus

Power).

Charge Voltage / Current

Maintenance Charge Voltage Threshold

Battery voltage in which battery charging should activate to maintain full capacity.

Charger Current

Max charge current rate will vary depending on ambient temperature and battery state of charge.

Charging above the recommended current rate may impact the battery cycle life. For more

detailed information on charging proﬁle, please discuss with Inventus Techincal Support.

When choosing an intelligent charger, please discuss with Inventus Technical Support on suitable

o-the-shelf charger solutions.

Model S-12V100-TRX-HD

Max Charge Voltage 14.4 VDC

Recommended Charge Voltage 14.0 VDC

Charge Current 50A (0.5C)

Max Charge Current 100A (1.0C)

Charge Temperature

(without heater)

0°C to 55°C

(32°F to 131°F)

Model S-12V100-TRX-HD

Maintenance Charge Voltage 13.4 VDC

Andere Handbücher für PROTRXion S-12V100-TRX-HD

Inhaltsverzeichnis

Andere Inventus Power Batteriepack Handbücher

Inventus Power

Inventus Power U1LiFePRO M-12V40-U1 Bedienungsanleitung

Inventus Power

Inventus Power PROTRXion M-24V60-TRX Bedienungsanleitung

Inventus Power

Inventus Power U1LiFePRO S-12V40-U1 Bedienungsanleitung

Inventus Power

Inventus Power PROTRXion M-48V60-TRX-HD Bedienungsanleitung

Inventus Power

Inventus Power U1LiFePRO M-12V40-U1 Bedienungsanleitung

Inventus Power

Inventus Power PROTRXion M-24V60-TRX Bedienungsanleitung

Inventus Power

Inventus Power PROTRXion M-48V60-TRX-HD Bedienungsanleitung

Inventus Power

Inventus Power PROTRXion S-48V60-TRX-HD Bedienungsanleitung

Inventus Power

Inventus Power U1LiFePRO S-12V40-U1 Bedienungsanleitung

Inventus Power

Inventus Power PROTRXion S-24V60-TRX Bedienungsanleitung

Inventus Power

Inventus Power PROTRXion M-24V60-TRX Bedienungsanleitung

Inventus Power

Inventus Power PROTRXion M-24V80-TRX Bedienungsanleitung

Inventus Power

Inventus Power PROTRXion S-24V60-TRX Bedienungsanleitung

Inventus Power

Inventus Power PROTRXion S-24V80-TRX Bedienungsanleitung

Inventus Power

Inventus Power PROTRXion M-24V80-TRX Bedienungsanleitung

Inventus Power

Inventus Power PROTRXion S-24V80-TRX Bedienungsanleitung

Inventus Power

Inventus Power U1LiFe 12V U1-40 Bedienungsanleitung

Inventus Power

Inventus Power PROTRXion S-12V100-TRX-HD Bedienungsanleitung

Beliebte Batteriepack Handbücher anderer Marken

Acumentrics

Acumentrics PACK-POWER SYSTEM Bedienungsanleitung

ACDC Dynamics

ACDC Dynamics SPF12-50 Bedienungsanleitung

Aegis

Aegis ABL-72020P Bedienungsanleitung

Dyness

Dyness TowerESS Bedienungsanleitung

Growatt

Growatt APX 5.0P-S0-US Bedienungsanleitung

EGO

EGO BAX1300 Bedienungsanleitung

CyberPower

CyberPower BCA Series Bedienungsanleitung

Intermec

Intermec 700 Series Bedienungsanleitung

Dometic

Dometic PLB40 Bedienungsanleitung

V-TAC

V-TAC VT-48280-W2 Bedienungsanleitung

Valence

Valence RT Bedienungsanleitung

Nikon

Nikon MB-D14 Bedienungsanleitung

IOGear

IOGear GBP24V Series Bedienungsanleitung

Clas Ohlson

Clas Ohlson PW-290A Bedienungsanleitung

EINHELL

EINHELL MULTI-Ah Power X-Change Plus Bedienungsanleitung

Samsung

Samsung EB-U3300 Bedienungsanleitung

ECTIVE

ECTIVE LC Series Bedienungsanleitung

Narada

Narada 12REXC70 Bedienungsanleitung