Invertek Drives Optidrive E2 Montage- und Bedienungsanleitung

Application note AN-ODE-2-026

24 April 2014

AN-ODE-2-026 Remote Keypad Control With Autorun

Optidrive Applications Support Library

Application Note

AN-ODE-2-026

Title

Remote Keypad Control With Autorun

Related Products

Optidrive E2

Level

1 –Fundamental - No previous experience necessary

2 –Basic –Some Basic drives knowledge recommended

3 –Advanced –Some Basic drives knowledge required

4 –Expert –Good experience in topic of subject matter recommended

Overview

For applications that require speed control via pushbuttons, but do not require a dedicated start button, Optidrive E2 provides a

mode of operation where the drive will automatically start as soon as the hardware enable (run switch) is closed.

Additionally, the user can determine whether the drive restarts from 0Hz or from the previous operational speed by setting one

of the drive parameters.

This document describes how to use the drive digital inputs to carry out remote keypad speed control with Auto-run.

Wiring Diagram

Procedure

For unidirectional operation

Connect the system as showed above, leaving terminal pin 6 disconnected.

Set P-12 = 1. Set P-15 = 0 (see digital input selection options in table 5.6 of the User guide).

Set P-31 = 2 if the drive should always restart form 0Hz (or minimum speed limit if P-02 > 0). Set P-31 = 3 if the drive

should restart from the speed at which it was last running prior to the last STOP.

Close the START/STOP switch to start the drive or open the switch to stop the drive.

Once the drive is running, press the UP button to increase the speed or press the DOWN button to reduce the speed.

START/STOP

SPEED UP (NO)

SPEED DOWN(NO)

FWD / REV

Pin 1 : 24V

Pin 2 : Digital input 1

Pin 3 : Digital input 2

Pin 4 : Digital input 3

Pin 6: Bipolar analog input

11-way control terminal strip

Application note AN-ODE-2-026

24 April 2014

AN-ODE-2-026 Remote Keypad Control With Autorun

For bidirectional operation

Connect the system as showed above.

Set P-12=2. Set P15 = 3 (see digital input selection options in table 5.6 of the User guide).

Set P-31 = 2 if the drive should always restart form 0Hz (or minimum speed limit if P-02 > 0). Set P-31 = 3 if the drive

should restart from the speed at which it was last running prior to the last STOP.

Close the START/STOP switch to start the drive, and open the switch to stop the drive.

Once the drive is running, press the UP button to increase the speed or press the DOWN button to reduce the speed.

Use the FWD/REV switch connected to terminal 6 to control the speed direction. Open the switch for forward operation

and close switch for reverse operation.

Appendix

Revision History

Issue

Comments

Author

Date

Document Creation

03/08/11

Revised to new format

24/04/14

Andere Handbücher für Optidrive E2

Inhaltsverzeichnis

Andere Invertek Drives Gleichstromantrieb Handbücher

Invertek Drives

Invertek Drives OPTIDRIVE P2 Series Leitfaden

Invertek Drives

Invertek Drives Optidrive HVAC Montage- und Bedienungsanleitung

Invertek Drives

Invertek Drives Eco Optidrive Series Bedienungsanleitung

Invertek Drives

Invertek Drives Optidrive HVAC Montage- und Bedienungsanleitung

Invertek Drives

Invertek Drives Optidrive E2 Montage- und Bedienungsanleitung

Invertek Drives

Invertek Drives OPTISTICK 2 Bedienungsanleitung

Invertek Drives

Invertek Drives Optidrive ODV-3-560540-3012-TN Bedienungsanleitung

Invertek Drives

Invertek Drives Optidrive HVAC Montage- und Bedienungsanleitung

Invertek Drives

Invertek Drives Optidrive E2 Montage- und Bedienungsanleitung

Invertek Drives

Invertek Drives Optidrive ODE-2-12005-1H01 01 Series Bedienungsanleitung

Invertek Drives

Invertek Drives Optidrive E2 Montage- und Bedienungsanleitung

Invertek Drives

Invertek Drives Optidrive iE3 Bedienungsanleitung

Invertek Drives

Invertek Drives OPTIDRIVE E3 Bedienungsanleitung

Invertek Drives

Invertek Drives Optidrive ODE-2-11005-1H01 Series Bedienungsanleitung

Beliebte Gleichstromantrieb Handbücher anderer Marken

Vincent Associates

Vincent Associates UNIBLITZ ED12DSS Bedienungsanleitung

EKSMA OPTICS

EKSMA OPTICS DQ-100-4 Stücklistenhandbuch

Chamberlain Garog

Chamberlain Garog D Series Bedienungsanleitung

Parker

Parker PDS Series Bedienungsanleitung

Festo

Festo DGC G Series Einrichtungshandbuch

Binks

Binks QS-5012-1-CE Bedienungsanleitung

Danfoss

Danfoss VLT 2800 Series Technisches Datenblatt

ABB

ABB ACQ580-01 Series Installationshandbuch

YASKAWA

YASKAWA CANopen SI-S3 Bedienungsanleitung

GE D20A6 Bedienungsanleitung

Unex

Unex MC-D-250-1000-050W-TW Bedienungsanleitung

Geckodrive

Geckodrive G213V Bedienungsanleitung

ABB

ABB RSYC-01 Bedienungsanleitung

Rockwell Automation

Rockwell Automation PowerFlex 700S Betriebsanleitung

WEG

WEG DeviceNet CFW500 Bedienungsanleitung

Siemens

Siemens SINAMICS G Datenblatt

Siemens

Siemens SINAMICS SM150 6SL3815-7NP41-0AA1 Betriebsanleitung

SOMFY

SOMFY JR RU 30 Bedienungsanleitung