IOGear GWHDKITD Bedienungsanleitung

Wireless TV Connection

with Dongle

Quick Start Guide

GWHDKITD

PART NO. Q1504-b

www.iogear.com

Package Contents

Product Introduction

1 x GWHDKITD Transmitter

1 x GWHDKITD Receiver

1 x 3 feet HDMI Cable

1 x HDMI Extender Cable

1 x USB Cable

This wireless HDMI video extender includes transmitter and receiver that

will allow an HDMI signal to be extended up to 75 feet. IR passback allows

you to control the source device from the receiver side using the video

source remote control.

1 x IR Blaster Cable

1 x IR Receiver Extender Cable

1 x Antenna

1 x DC5V/2A Wall Mount Switching Power Supply

1 x Quick Start Guide

System Requirements

Features 2

1. Compliant with HDMI 1.3 and HDCP 1.2.

2. Highest resolution up to 1080p full HD.

3. Strong anti-interference by operating at 5GHz frequency.

4. Support point to point wireless configuration.

5. Support IR pass back with 20-60KHz frequency.

6. Range up to 75 feet.

7. Plug and play, no software installation required.

1 HDMI source device (DVD, PS3, Set top box, PC, etc.)

1 HDMI display device (SDTV, HDTV, projector with HDMI port, etc.)

Overview 3

F. Power input

G. Power indicator

H. Wireless connection indicator

I. HDMI output connector

J. IR receiver extender

cable connector

K. Antenna connector

A. HDMI input

B. Wireless connection indicator

C. Power input

D. Power indicator

E. IR blaster cable connector

Receiver Back

Transmitter

B C D E

Hardware Installation

Please read safety instructions carefully before installation and operation:

1. Please pay attention to all the warnings and hints for this device.

2. Do not expose this unit to rain, moisture or liquid.

3. Do not insert any foreign object into the device.

4. Opening the enclosure will void the warranty.

5. Place the device in a well ventilated area.

6. Use DC5V/2A only. Make sure the specification matched if using 3rd

party DC adapters.

Note:

1) Transmission distance will vary due to the environment.

2) Obstructions such as wall, brick or glass will shorten the signal cover

range or cause signal degradation.

3) Ideally works best using line-of-sight.

Hardware Installation 5

Transmitter

STEP 1 Insert the transmitter into an open HDMI port on the video source device

(Blu-ray, computer, media player, etc.). In case the space is too tight around the

HDMI port, or the position of the HDMI port is at an awkward angle and could

possibly cause a connection issue, use the HDMI cable extension cable included in

the package to increase the space or correct position issues.

STEP 2 Use the USB charging cable to connect the micro USB port on the

transmitter to a type A USB port on the source device to obtain power. In the rare

case that the source device has no USB port, please use a 5V USB power adapter

with a minimum 500mA output (not included in the package).

STEP 3 Skip this step if the video source device does not use an IR remote,

for example, a computer. Take the IR Out for TX cable from the box, connect the

IR TX cable to the IR Out port on the transmitter; peel off the protective paper from

the sensor end of the cable and place it in front of the video source device with the

round area of the IR TX sensor facing the IR sensor on the source device (it is very

important to accurately identify the IR sensor area on the video source device, you

may have to use your remote very close to the video source device to find it).

Hardware Installation 6

STEP 4 Install the antenna to the receiver

STEP 5 (Disregard this step if skipped in step 3) Take the IR In for RX cable

from the box, insert IR RX cable to the IR In port on the receiver; peel off the

protective paper from the sensor end of the cable and place it with the round

area of the IR sensor facing out towards the viewing area, the IR RX sensor

must be able to receive the signal from the video source device remote control.

STEP 6 Connect one side of the HDMI cable to the receiver and the other

side to your HDMI display device

Receiver

Hardware Installation 7

STEP 7 Connect DC5V/2A power supply to the Receiver power input port

STEP 8 Power on the video source device, then power on the video display. The

power indicator LED’s should be lit on both the transmitter and the receiver

indicating they are powered on. Once connected wirelessly, you should be able to

see the video content on the video display and both wireless signal LED’s should

blink which indicates video is being transmitted.

NOTE: This wireless kit is designed as a same-room solution, it is not intended to

go through walls.

FAQ

Q Everything is connected, power LEDs are on for both devices, but no

video on the video display.

A: 1. Make sure the video source device and the video display are turned on;

2. Check the HDMI cable connection at both sides to make sure they are

plugged in firmly;

3. Check the video input selection on the video display device, make sure that

the HDMI input port you selected is the same as the one you actually

plugged in;

4. If still no video after some time, connect the video source device to the

video display directly with the HDMI cable to make sure there are no

compatibility issues;

5. If the direct connection is working. reconnect everything restart (unplug

then re-plug the USB power cables) both transmitter and receiver and

make sure the LEDs light up.

Q Video is not stable on the video display.

A: 1. Check the distance and environment, make sure no other wireless devices

with a strong wireless signal is close;

2. Change the location of the transmitter and the receiver to make sure the

device is within the allowed range and there no obstacles in between;

3. Check the HDMI cable connection at both sides to make sure they are

plugged in firmly;

If all of the above has been checked and there is still no video displayed, contact

IOGEAR Technical Support for further support.

Specification

Items Speciﬁ cation

Power supply

Voltage/Current Transmitter: DC5V/1A Receiver: DC5V/2A

Power consumption TX < 3W Rx < 5W

HDMI

performance

and interface

HDMI compliance HDMI 1.3

HDCP compliance HDCP 1.2

HDMI resolution supported

480i@60Hz, 480p@60Hz, 576i@50Hz,

576p@50Hz, 720p@50/60Hz, 1080i@50/60Hz,

1080p@50/60Hz

Supports audio formatsL/R stereo audio

Maximum transfer rate 10.2Gbps

Input and output TMDS signal 0.7 ~ 1.5Vp-p (TMDS)

Input and output DDC signal 5Vp-p (TTL)

Input cable length supported ≤ 5m (AWG26 HDMI 1.3 cable standard)

Output cable length supported ≤ 5m (AWG26 HDMI 1.3 cable standard)

Wireless

performance

and interface

Transmission method 5.8G Wireless transmission

Transmission distance 100 Feet (30.48 Meters)

Latency ≤ 200 ms

Protection level Electrostatic protection of the whole

machine

1a Contact discharge level 3

1b Air discharge level 3

Standard: IEC61000-4-2

Operating

environment

Working temperature0 ~ 40°C (32 ~ 122 °F)

Storage temperature -20 ~ 70°C (-4 ~ 158 °F)

Humidity (no condensation) 0 ~ 90%

Body properties

Dimension TX: 3.5 (W) x 1.54 (D) x 0.59 (H) in

RX: 5.18 (W) x 3.74 (D) x 0.78 (H) in

Material Plastic

Finishing Grit blast

Colour Black

Weight TX: 0.06lb, RX: 0.48lb

Reliability Mean time between failures (MTBF) >30000 Hours

Inhaltsverzeichnis

Andere IOGear Computerhardware Handbücher

IOGear

IOGear GWP512 Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

Intel

Intel NUC 12 Pro Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung

Advantech

Advantech ASMB-935 Series Bedienungsanleitung

Jupiter

Jupiter RAM PACK Bedienungsanleitung