IOGear GCE800W6 Bedienungsanleitung

GCE800W6

Part No. M0577

Installation

Installation Guide

KVM Extender with on board audio

Overview

The GCE800 USB KVM Extender with on board audio allows access to a computer system from a remote

console (USB keyboard, mouse, monitor, stereo speakers, and microphone). It is perfect for factory and

construction sites, or any type of installation where the console needs to be in a conveniently accessible

location, but you want the system equipment to reside in a safe place - away from dust, dirt, and harsh

environmental inuences. The GCE800 also is useful for control and security purposes. Store the system

unit in a secure area at the same time that you put the console in a location that offers convenient access.

Recognizing the increased importance of sound in the computing environment, the GCE800 improves

on earlier models by incorporating audio capability. Now, audio (stereo microphone and stereo speakers)

transmission can be extended to the remote system along with the KVM data.

The GCE800 USB KVM Extender improves on previous designs by using compact Cat 5 cable - the kind

commonly used in Ethernet networks which makes for a much neater, more convenient, more reliable data

transfer connection. In addition, the GCE800 has a built-in USB port that complies with the USB Mass

Storage specication and supports USB Mass Storage compliant ash drives. Setup is as easy as can be:

simply connect the computer system and local console components to the local GCE800 module, run

the Cat 5 cable to the Remote GCE800 module (up to 820 ft) ; and connect the console to the Remote

Module.

Note: You can control numerous remote systems from a single console by combining the GCE800 with a

KVM switch.

Table of Contents

Overview 3

Package Contents 5

Features 6

System Requirements 7

Hardware Introduction 11

Hardware Setup 15

Installation 17

Operation 19

LED Display 22

OSD Operation 25

OSD Navigation 27

Hotkey Operation 33

Keyboard Emulation 40

The Firmware Upgrade Utility 42

Administrator Password 49

Appendix 50

Specications 55

Troubleshooting 59

User Notice 60

Federal Communications Commission

(FCC) Statement CE Statement

Limited Warranty 63

Contact 64

Package Contents

The CE800 Audio KVM Extender package contains:

• 1 CE800L KVM Extender (Local Unit)

• 1 CE800R KVM Extender (Remote Unit)

• 1 Custom KVM 6 ft (1.8 m) Cable

• 2 Power Adapters

• 1 Firmware Upgrade Cable

• 1 Rack Mount Kit

• 1 User Manual

• 1 Quick Start Guide

Check to make sure that all the components are present and that nothing was damaged in shipping. If

you encounter a problem, contact your dealer.

Read this manual thoroughly and follow the installation and operation procedures carefully to prevent

any damage to the unit, and/or any of the devices connected to it.

Features

• Uses Cat 5 ( or better) to connect the Local and Remote Units – up to820 ft (250 meters) apart

• Control your system from either the local or remote consoles

• Pushbutton selection can lock control to either computer

• Built-in USB ports on both units support USB mass storage devices for simple le transfer

• Congurable security requires user name and password to mount USB storage devices

• Supports VGA, SVGA, and multi-sync monitors

• The local unit supports DDC, DDC2, and DDC2B monitors

• High Resolution Video – up to 1600 x 1200 @ 60 Hz

• Built-in 8KV ESD protection and 2KV surge protection

• Manually adjustable gain control for distance compensation.

• Supports microphone and powered stereo speakers

• Supports most two button scroll wheel mice

• Up gradable rmware

System Requirements

Consoles ( 1 each per console )

• A VGA, SVGA, or Multi-sync monitor capable of the highest resolution you want to use

• A USB style keyboard

• A USB style mouse

• A Microphone and Stereo Speakers (optional)

Note: If you connect a DDC type monitor to the Local unit, the monitor that connects to the Remote unit must be

able to support the highest video resolution that the DDC monitor can provide

Computers

• A VGA, SVGA or Multi-sync card

• A USB Host Controller and Type A USB Port

• Audio out (optional )

KVM

• VGA / SVGA support

• A USB Host Controller and Type A USB Port

• Hot key or OSD ( On Screen Display) switching

• Audio Support (optional)

Operating Systems

Cables

For optimum signal integrity and to simplify the layout, we strongly recommend that you use the high-quality Cus-

tom USB KVM Cable that is provided with this package.

Cat 5 cable is the minimum required to connect the local and remote CE800 units. Cable of a lower standard may

result in degraded video signals. For best performance, we strongly recommend at least Cat 5 cable.

• Windows 2000 and higher

• Redhat 7.1, 7.2, 7.3, 8.0 and higher

• Mandrake 9.0 and higher

• SUSE 8.2 and higher

• FreeBSD 4.2, 4.3, 4.5 and higher

• Netware 6.0 and higher

CE800L (Local Unit) Front View

Supported operating systems are shown in the table, below:

No. Component Description

1 KVM Port Section This section is made up of a microphone jack, speaker

jack and KVM (keyboard, video, mouse), data connector.

The cable that links the CE800L to your local KVM

console plugs in here. Only KVM cables designed to work with this switch can be

used.

2 Audio connections microphone and speakers connect here

3 USB Port External USB Mass Storage compliant ash drives plug

into this port..

4 Operating Mode

Selection Switch

Pressing this switch toggles the operating mode between

Auto and Local. See Mode Selection, page 11 for details

5 Remote LED

The Local Unit has two LEDs to indicate the operating

status of the Local and Remote units (see LED Display,

page 12 for details).

6 Local LED

Inhaltsverzeichnis

Andere IOGear Extender Handbücher

IOGear

IOGear GVE120 Bedienungsanleitung

IOGear

IOGear GVE320 Bedienungsanleitung

IOGear

IOGear GVE130 Bedienungsanleitung

IOGear

IOGear GPLWE150 Bedienungsanleitung

IOGear

IOGear GPLWEKIT Bedienungsanleitung

IOGear

IOGear M1442-a Bedienungsanleitung

IOGear

IOGear GCE250 Bedienungsanleitung

IOGear

IOGear GVE120 Bedienungsanleitung

IOGear

IOGear GCE250 Bedienungsanleitung

IOGear

IOGear GW4K30GH60 Bedienungsanleitung

IOGear

IOGear GCE500U Bedienungsanleitung

IOGear

IOGear GCE700 Bedienungsanleitung

IOGear

IOGear GVE340 Bedienungsanleitung

IOGear

IOGear GCE611U Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung

SECO-LARM

SECO-LARM ENFORCER EVT-PB1-V1TGQ Bedienungsanleitung