IOGear GWMRHDKIT Bedienungsanleitung

Quick Start Guide

GWMRHDKIT

PART NO. Q1541

www.iogear.com

Expandable Wireless HDTV

Connection Kit with 2 Receivers

Package Contents

Product Introduction

1 x GWMRHDKIT Transmitter

2 x GWMRHDKIT Receiver

1 x Remote Control

3 x 3 Foot HDMI Cable

1 x IR Blaster Cable

2 x IR Receiver Extender Cable

3 x Antennas

3 x DC5V/2A Wall Mount Switching Power Supply

1 x Quick Start Guide

1 x Warranty Card

This HDMI wireless extender includes transmitter unit and 2 receiver

units which allow the transmission and extension of HDMI signal up

to 150 feet away wirelessly. It has strong interference rejection ability

by running at 5GHz frequency. This wireless extender not only

supports point to point configuration, but also supports one to many

(1 to 2) and many to many (2 to 2, 2 to 1) configuration. This extender

supports a wide range IR pass back frequency 20-60KHz to be able

to control source devices from receiver side remotely. With both

push-button control and IR controller this simplifies channel setting.

This is a very good solution for transmitting one or more HDMI source

signal to one or more screens for long distances without running

wires, perfect for applications such as conference halls, home

entertainment and education etc.

Features

System Requirements

1 HDMI source device (DVD, PS3, Set top box, PC, etc.)

1 HDMI display device (SDTV, HDTV, projector with HDMI port, etc.)

1. Smart portable design, great performance.

2. Highest resolution up to 1080p full HD.

3. Strong interference rejection ability by using 5GHz frequency with

WPA encryption.

4. Supports point to point, point to multi point (1 to 2) and multi point to

multi point (2 to 2, 2 to 1) configuration.

5. Supports IR pass-back with 20-60KHz frequency.

6. Supports push button control to set channels and IR controller to

switch and choose input sources from receiver side (remotely).

7. 150 feet long range transmission.

Overview

A. Channel indicator

B. Channel selector button

C. IR remote control window

Transmitter Front

Transmitter Back

D. Power input

E. HDMI input

F. HDMI input signal indicator

G. Wireless signal indicator

H. IR blaster cable connector

I. Antenna connector

Overview

A. Input Channel indicator

B. Channel selector button

C. IR remote control window

D. Power input

E. Data transmission indicator

F. Wireless connection indicator

G. HDMI output connector

H. IR receiver extender cable connector

I. Antenna connector

Receiver Back

Receiver Front

Hardware Installation

Please read safety instructions carefully before installation and operation:

1. Please pay attention to all the warnings and hints for this device.

2. Do not expose this unit to rain, moisture or liquid.

3. Do not insert any foreign object into the device.

4. Opening the enclosure will void the warranty.

5. Place the device in a well ventilated area.

6. Use DC5V/2A power adapter only. Make sure the specification

matched if using 3rd party DC adapters.

Note:

1) Transmission distance will vary due to the environment.

2) Obstructions such as wall, brick or glass will shorten the signal

cover range or cause signal degradation.

3) It is recommended that the distance between each unit should

be more than 15 feet.

Connection Options

1 Transmitter 1 Receiver

1 Transmitter 2 Receivers

2 Transmitters 1 Receiver

2 Transmitters 2 Receivers

Hardware Installation

STEP 1 Install the antenna to the transmitter

Transmitter

STEP 2 Connect the IR blaster cable to the connector

STEP 3 Connect one side of the HDMI cable to the transmitter

and the other side to your video source

STEP 4 Connect DC5V/2A power adapter to the Transmitter

power input port

Receiver

STEP 7 Connect one side of the HDMI cable to the receiver and

the other side to your HDMI display device

STEP 5 Install the antenna to the receiver

STEP 6 Connect the IR receiver extender cable to the connector

STEP 8 Connect DC5V/2A power adapter to the Receiver power

input port

When connected to the source and powered up you will have 2 Solid LEDS

Hardware Installation

Note:

The wireless connection is established when you have one solid and one

flashing LED on both the transmitter and receiver. If your video source

and your display is on, you should be able to see the content of the

source on your display.

STEP 9

Please select channel on your

receiver(s) to match the channel

on your transmitter to stream

content of the video source that

the transmitter is connected to

Channel selection can be done in 2 ways, manually press the button in

front of the transmitter and the receiver or you can use the included remote

to select the channels. To use the remote, simply point the included remote

to the front of each unit after making sure that you have removed the

plastic tab at the battery cover to enable the battery connection.

ReceiverTransmitter

CHANNEL CHANNEL

When the Receiver is connected, the TV will display - wait for connection to

be established.

Once connected to the transmitter, the LEDS will have 1 solid and 1 flashing.

Specification

Items Speciﬁ cation

Power supply

Voltage/Current DC5V/2A

Power consumption TX < 7W Rx < 5W

HDMI performance

and interface

HDMI compliance HDMI 1.3

HDCP compliance HDCP 1.2

HDMI resolution supported

480i@60Hz, 480p@60Hz, 576i@50Hz,

576p@50Hz, 720p@50/60Hz, 1080i@50/60Hz,

1080p@50/60Hz

Supports audio formats PCM

Maximum transfer rate 10.2Gbps

Input and output TMDS signal 0.5 ~ 1.5Vp-p (TMDS)

Input and output DDC signal 5Vp-p (TTL)

Input cable length supported ≤ 5m (AWG26 HDMI 1.3 cable standard)

Output cable length supported ≤ 5m (AWG26 HDMI 1.3 cable standard)

IR performance and

interface IR remote control Support IR passback with 20-60KHz frequency

Wireless performance

and interface

Transmission method 5.8G Wireless transmission

Transmission distance 50 Meters (164 Feet)

Latency ≤ 200 ms

Protection level Electrostatic protection of the whole machine

1a Contact discharge level 3

1b Air discharge level 3

Standard EC61000-4-2

Operating

environment

Working temperature0 ~ 50°C (32 ~ 122°F)

Storage temperature -10 ~ 70°C (14 ~ 158°F)

Humidity (no condensation) 0 ~ 90%

Body properties

Dimension 3.7 (W) x 4.75 (D) x .79 (H) in

Material Plastic

Processing technology Sandblasting

Colour Black

Weight TX: 200g (.44lb), RX: 200g (.44lb)

ReliabilityMean time between failures (MTBF) >30000 Hours

Compliance Information

Limited Warranty

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital

service, pursuant to Part 15 of the FCC rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. Any

changes or modifications made to this equipment may void the user’s authority to operate

this equipment. This equipment generates, uses, and can radiate radio frequency energy.

If not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

- Reorient or relocate the receiving antenna

- Increase the separation between the equipment and receiver

- Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected

- Consult the dealer or an experienced radio/TV technician for help

FCC Caution: Any changes or modifications not expressly approved by the party

responsible for compliance could void the user’s authority to operate this equipment.

WE’RE HERE TO HELP YOU!

NEED ASSISTANCE SETTING UP THIS PRODUCT?

Make sure you:

1. Visit www.iogear.com for more product information

2. Visit www.iogear.com/support for live help and product support

IOGEAR

https://iogear.custhelp.com

support@iogear.com

www.iogear.com

This product carries a 1 Year Limited Warranty. For the terms and conditions of this

warranty, please go to https://www.iogear.com/support/warranty

Important Product Information

Product Model _____________

Serial Number _____________

Items Speciﬁ cation

Power supply

Voltage/Current DC5V/2A

Power consumption TX < 7W Rx < 5W

HDMI performance

and interface

HDMI compliance HDMI 1.3

HDCP compliance HDCP 1.2

HDMI resolution supported

480i@60Hz, 480p@60Hz, 576i@50Hz,

576p@50Hz, 720p@50/60Hz, 1080i@50/60Hz,

1080p@50/60Hz

Supports audio formats PCM

Maximum transfer rate 10.2Gbps

Input and output TMDS signal 0.5 ~ 1.5Vp-p (TMDS)

Input and output DDC signal 5Vp-p (TTL)

Input cable length supported ≤ 5m (AWG26 HDMI 1.3 cable standard)

Output cable length supported ≤ 5m (AWG26 HDMI 1.3 cable standard)

IR performance and

interface IR remote control Support IR passback with 20-60KHz frequency

Wireless performance

and interface

Transmission method 5.8G Wireless transmission

Transmission distance 50 Meters (164 Feet)

Latency ≤ 200 ms

Protection level Electrostatic protection of the whole machine

1a Contact discharge level 3

1b Air discharge level 3

Standard EC61000-4-2

Operating

environment

Working temperature0 ~ 50°C (32 ~ 122°F)

Storage temperature -10 ~ 70°C (14 ~ 158°F)

Humidity (no condensation) 0 ~ 90%

Body properties

Dimension 3.7 (W) x 4.75 (D) x .79 (H) in

Material Plastic

Processing technology Sandblasting

Colour Black

Weight TX: 200g (.44lb), RX: 200g (.44lb)

ReliabilityMean time between failures (MTBF) >30000 Hours

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere IOGear HDTV Handbücher

IOGear

IOGear GWMHDKIT22 Bedienungsanleitung

Beliebte HDTV Handbücher anderer Marken

Vizio

Vizio M602i-B3 Bedienungsanleitung

JVC

JVC LT-40C750 Bedienungsanleitung

Pendo

Pendo PNDLFHU55 Bedienungsanleitung

RCA

RCA RTU7575-B Bedienungsanleitung

Sharp

Sharp LC60LE830UN Bedienungsanleitung

LEECO

LEECO uMax85 Bedienungsanleitung

LG 50PC1DRA Bedienungsanleitung

Samsung

Samsung Tantus HCJ555W Bedienungsanleitung

Sceptre

Sceptre X23 Bedienungsanleitung

Medion

Medion LIFE P13901 Bedienungsanleitung

Vizio

Vizio D32h-C0 Bedienungsanleitung

JVC

JVC EM39T Bedienungsanleitung

Sceptre

Sceptre X460BV-FHD Bedienungsanleitung

BEA

BEA 49B4KUHD Bedienungsanleitung

EQD

EQD Auria EQ3288 Bedienungsanleitung

JVC

JVC LT-24C660 Bedienungsanleitung

RCA

RCA Scenium D32TF20 Bedienungsanleitung

LG M3702C Bedienungsanleitung