IOGear GCS1902 Bedienungsanleitung

www.iogear.com

User Manual

2/4-Port DisplayPort KVMPTM Switch

with USB 3.0 Hub and Audio

GCS1902 / GCS1904

PART NO. M1434-a / M1435-a

and Windows are registered trademarks of Microsoft Corporation. IOGEAR makes no warranty of any kind with regards to the

information presented in this document. All information furnished here is for informational purposes only and is subject to change

without notice. IOGEAR. assumes no responsibility for any inaccuracies or errors that may appear in this document.

Table of Contents

Introduction 4

Package Contents 4

Features 5

Requirements 6

Operating Systems 6

Overview 7

Hardware Setup 10

Basic Operation 13

Hotkey Operation 14

Advance Conguration 16

Keyboard Operating Platform 19

Keyboard Emulation 20

Firmware Upgrade Utility 22

Specication 25

Troubleshooting 26

Compliance Information 27

Limited Warranty 28

Contact 29

IOGEAR’s GCS1902/1904 2/4-Port DisplayPort KVMP with USB 3.0 Hub and Audio takes a

giant leap forward in KVM switch functionality by combining KVM switch with a DisplayPort

video interface, and 2-Port USB 3.0 hub. DisplayPort technology provides up to 4K UHD -

3840 x 2160 @30Hz resolution that displays the most vivid high denition images available

while delivering premium sound for music, movies, and gaming.

GCS1902/1904 allows users to access two or four DisplayPort computers from a single

USB keyboard, USB mouse, and DisplayPort monitor console. In addition to the front panel

pushbuttons and hotkeys, IOGEAR’s GCS1902/1904 offers the latest mouse port-switching

functionality to change ports. Power ON detection feature also ensures that if one computer

is powered OFF, the GCS1902/1904 will automatically switch port to the next powered

ON computer.

With built-in USB 3.0 hub, each connected computer has SuperSpeed 5Gbps transfer

rate to all connected peripherals. GCS1902/1904’s independent (asynchronous) switching

feature allows it to focus on one computer with the USB peripheral focus on another

computer. This eliminates the need to purchase separate USB hub or stand-alone

peripheral sharing device – such as printer server, modem splitter, etc.

Featuring a revolutionary combination of 4K resolutions, the next generation USB 3.0

Hub, and enhanced user-friendly operation, IOGEAR’s GCS1902/1904 provides the latest

innovations in desktop KVM technology.

Introduction

GCS1902

1 x GCS1902

2 x DisplayPort Cables

2 x USB 3.0 Cables

2 x Audio Cables

1 x Power Adapter

1 x User Manual

GCS1904

1 x GCS1904

4 x DisplayPort Cables

4 x USB 3.0 Cables

4 x Audio Cables

1 x Power Adapter

1 x Use Manual

Package Contents

• 2 (GCS1902) or 4 (GCS1904)-Port DisplayPort KVMP Switch with USB 3.0 Hub

and audio

• One USB console controls two (GCS1902) or four (GCS1904) computers and two USB

3.0 peripherals

• Computer selection via front panel pushbuttons, hotkeys, and mouse1

• Independent switching of KVM, USB, and Audio focus

• Superior 4K video quality – 3840x2160 @30Hz

• 2-Port USB 3.0 Hub with SuperSpeed 5Gbps transfer rate

• DisplayPort 1.1 compliant, HDCP compliant

• Supports HD audio through DisplayPort2

• Full bass response for high quality 2.1 channel surround sound systems

• Power On Detection – if a computer is powered OFF, GCS1902/1904 automatically

switches to the next powered ON computer

• Dual-Mode DisplayPort (DP++) supports HDMI and DVI output with an adapter3

• Hot pluggable – add or remove computers without turning GCS1902/1904 power OFF

• Mouse emulation or bypass feature supports most mouse drivers and multifunction mice

• Multi-platform support –Windows®7, Windows®8.1, Windows®10, Mac®, and Linux®

• Multilingual keyboard mapping supports English, Japanese, French, and

German keyboards

• Mac®keyboard support and emulation4

• Auto Scan Mode feature to monitor all computers

• Firmware upgradeable

Note:

1. Mouse port switching supported by mouse emulation mode using a USB 3-button

mouse wheel.

2. HD audio through DisplayPort cannot be switched independently.

3. Dual-Mode DisplayPort technology (DP++) does not require an active adapter for most

single display setups. Active DisplayPort adapters are recommended if you are unsure

of the video source’s DP++ compatibility.

4. PC keyboard combinations emulate Mac® keyboards. Mac® keyboards only work using

their own Operating System.

Features

Console

• 1 DisplayPort monitor

• 1 USB mouse

• 1 USB keyboard

• Speakers (optional)

Computers

• DisplayPort port

• Type A USB port

• Audio ports (optional)

Cables

Use only the included IOGEAR DisplayPort KVM cable sets, designed specically to work

with the GCS1902/1904.

Note:

The quality of the display is affected by the quality and length of the cables. If you need

additional cable set, please contact your dealer or IOGEAR to purchase IOGEAR

approved cables.

Requirements

Operating Systems

OS Version

Windows 2000 / 7 / 8 / 8.1 / 10

Linux RedHat 6.0 and higher

SuSE 8.2 and higher

Mandriva (Mandrake) 9.0 and higher

Novell Netware 5.0 and higher

Mac OS 9 and higher

DOS 6.2 and higher

2-Port DisplayPort

KVMP Switch

GCS1902

234

7 4 6

GCS1902 Front View

GCS1902 Back View

Overview

4-Port DisplayPort

KVMP Switch

GCS1904

234

GCS1904 Front View

GCS1904 Back View

No. Component Description

1 Port Selection

Pushbuttons

For manual port selection (see Manual Switching)

• Press a port selection pushbutton for longer than two seconds to

bring the KVM, USB hub, and audio focus to the computer connected

to its corresponding port.

• Press a port selection pushbutton twice to bring the audio focus to

the computer connected to its corresponding port.

• Press a switch for less than two second to bring only the KVM focus

to the computer connected to its corresponding port.

• Press Auto Scan switch to start Auto Scan Mode or press switches

• 1 and 2 simultaneously for two seconds.

2 Port LEDs The Port LEDs are built into the Port Selection Pushbuttons. The upper

LEDs are KVM Port LEDs, the lower LEDs are the USB LEDs:

KVM

• An ONLINE LED lights DIM ORANGE to indicate that the

computerconnected to the corresponding port is up and running.

• A selected LED lights BRIGHT ORANGE to indicate that the

computer connected to the corresponding port is the one that has the

KVM FOCUS.

• LED ashes to indicate that the computer connected to its

corresponding port is being accessed under Auto Scan Mode.

USB

A selected LED lights GREEN to indicate that the computer connected

to its corresponding port has the access to the USB Peripherals.

3 Audio Ports The cable from the main speakers is to be connected into this audio

port. Speaker connected into these audio ports have priority over those

connected in the rear side panel.

4 USB 3.0 hub USB peripherals (printers, scanners, etc.) can be connected into

these ports, designated with USB 3.0 specications - up to 5 Gbps

transfer code.

5 Console Ports The cables from the DisplayPort monitor, USB keyboard, USB mouse,

and speakers are plugged into these ports.

Each connector is marked with an appropriate icon to indicate its use.

6 KVM Ports The KVM cables connecting the computers to the GCS1902/1904 are

plugged into these ports.

Each KVM port section is comprised of a speaker jack, USB type B

socket and a DisplayPort connector.

7 Power Jack The power adapter cable is plugged into this jack.

Hardware Setup

Please make sure that all devices including the GCS1902/1904, DisplayPort monitor, and

computers are powered OFF.

1. Connect the USB keyboard and the USB mouse to the GCS1902/1904 Console ports

located on the rear side panel.

2. Connect the DisplayPort monitor to the GCS1902/1904 Console DisplayPort port

located on the rear side panel. Then, turn DisplayPort monitor on.

3. Connect the main speakers into the GCS1902/1904 speaker jacks located on the

front side panel. The speakers connected into this front port have priority over those

connected on the rear port of GCS1902/1904.

4. Connect the secondary speakers into the GCS1902/1904 Console speaker jacks

located on the rear panel.

5. Using the provided cables from IOGEAR;

a. Connect the provided DisplayPort connector into DisplayPort ports in the KVM Port

section of the GCS1902/1904.

b. Connect the provided USB and speaker connector into their corresponding USB and

speaker ports on the GCS1902/1904.

c. Connect the other end of the KVM cables into their respective DisplayPort, USB and

speaker ports on the computers.

6. Connect up to two USB peripherals into the USB type A ports in the USB 3.0 hub

section (front and rear panel of the GCS1902/1904).

7. Connect the provided power adapter to an AC power source. Then, connect the power

adapter cable into the GCS1902/1904 power jack.

8. Turn all connected computers power to ON.

Note:

1. Verify that all connectors are on the same KVM Port sockets (all in Port 1, all in Port 2, etc.) and

that each socket is marked with an appropriate icon to indicate self.

2. By default the switch links to the rst computer that is powered on.

3. It is recommended that the total cable length from the PC to monitor is less than 3 meters.

4. Choosing high quality cables helps to ensure that 3840x2160 @30Hz resolutions can be reached.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere IOGear Schalten Handbücher

IOGear

IOGear GCL1908 Bedienungsanleitung

IOGear

IOGear MiniView GCS1742 Bedienungsanleitung

IOGear

IOGear MiniView SE GCS82B Bedienungsanleitung

IOGear

IOGear M1123 Bedienungsanleitung

IOGear

IOGear KeyMander 2 3Play Installationsanleitung

IOGear

IOGear GCS942UW6-Q0580 Bedienungsanleitung

IOGear

IOGear GUWH104KIT Bedienungsanleitung

IOGear

IOGear Gigalinq GUH3C34 Bedienungsanleitung

IOGear

IOGear MiniView Extreme GCS1732 Bedienungsanleitung

IOGear

IOGear GCS1782 Bedienungsanleitung

IOGear

IOGear GCS2HU Bedienungsanleitung

IOGear

IOGear GVS881 GVS881 GVS881 Bedienungsanleitung

IOGear

IOGear GCS1722 Bedienungsanleitung

IOGear

IOGear MicroHub GUH274W3 Bedienungsanleitung

IOGear

IOGear Wireless USB Hub and Adapter Kit GUWH204KIT Bedienungsanleitung

IOGear

IOGear GCS1412TAA4C Bedienungsanleitung

IOGear

IOGear 8-Port DVI KVMP Switch Bedienungsanleitung

IOGear

IOGear GHDSW4K4 Q1326 Bedienungsanleitung

IOGear

IOGear Q1339 Bedienungsanleitung

IOGear

IOGear GCS1792 Bedienungsanleitung

IOGear

IOGear MiniView GCS632U Bedienungsanleitung

IOGear

IOGear GUH304 Bedienungsanleitung

IOGear

IOGear GUS4C2 Bedienungsanleitung

IOGear

IOGear MiniView Micro Audio GCS614A Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung