Iomega REV 35gb Montageanleitung

REV™ 35gb

Removable Hard Disk Drive

Integrator Guide

Table of Contents

System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

ATAPI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Installing the Iomega REV Internal ATAPI Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Iomega REV Internal ATAPI Drive Jumper Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

SCSI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Installing the Iomega REV Internal SCSI Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Iomega REV Internal ATAPI Drive Jumper Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Tech Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

About the Iomega REV System Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Troubleshooting the REV Internal SCSI Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

System Requirements

The following are the minimum system requirements for using a REV drive.

Supported Operating Systems

• Windows XP (Home and Professional)

• Windows Server 2003 (Standard and Small Business Editions)

• Windows 2000 Professional (SP3 and SP4)

• Windows 2000 Server (SP3 and SP4)

• Windows 2000 Advanced Server (SP3 and SP4)

Hardware Requirements

• 333 MHz processor, or higher

• Available 5.25" or 3.5" drive bay

• Available internal power connector

• 4X CD-ROM drive to use the Solutions CD

• 100MB hard drive space

• 128MB RAM

Additional Hardware Requirements for REV SCSI drive

• SCSI adapter card (68-pin SCSI only)

ATAPI

Install the REV System Software.

NOTE: See the “About the REV System Software” section of this guide for more

information.

Disconnect the power cord, and remove the cover to your computer. Verify that the

REV drive jumper settings are set to Cable Select as shown in the illustration.

NOTE: If you will be connecting another drive to the REV IDE data cable set the jumper

settings for that drive to cable-select.

Installing the Iomega REV Internal ATAPI Drive

ATAPI

Locate a vacant drive bay (5.25

or 3.5

drive bay) and remove the panel cover. Slide

the REV drive into the drive bay.

NOTE: If you are installing into a 5.25

drive bay, you will need a mounting bracket

(available from your computer retailer).

Connect the black connector of the IDE data cable to the back of the REV drive

NOTE: For best performance, use the cable that shipped with the drive.

ATAPI

Connect the  blue connector of the IDE data cable to the secondary channel on the

motherboard and the  gray connector to another drive (optional).

NOTE: If the secondary channel already has a cable attached, replace with the IDE data

cable as shown here or see the User’s Manual for detailed instructions.

Connect a  spare power supply cable from the computer to the drive.

NOTE: If there is no spare power supply cable, you may need to purchase a Y-cable

power adapter.







ATAPI

Replace the cover, connect the power cord and restart your computer.

Confirm that your drive appears in the list by selecting Yes, and then select Close.

NOTE: If the detection software does not startup or you do not see your drive listed,

refer to the user’s manual on the CD for help.

ATAPI

GB /

Native/Compressed

Insert a disk and your drive is now ready to use. The REV drive icon will display in My

Computer or Windows Explorer.

NOTE: If this package did not include a REV disk, you will need to purchase one.

Iomega REV Internal ATAPI Jumper Settings

 Cable Select (Default)

 Slave

 Master

SCSI

Install the REV System Software.

NOTE: See the “About the REV System Software” section of this guide for more

information.

Select an appropriate SCSI ID. The Iomega REV comes preset at SCSI ID 4.

You can use any SCSI ID that is not already in use by the computer or another device.

See the drive properties for information on the IDs of connected devices. ID 7 is

generally reserved for the SCSI adapter card.

Installing the Iomega REV Internal SCSI Drive

SCSI

Check the Term Power (Termination Power) setting of the REV drive.

Your SCSI chain must have a termination block (preinstalled on most cables) and at

least one device that provides termination power. The Iomega REV drive provides

termination power by default. If you do not want the REV drive to provide termination

power, remove the Term Power jumper.

Power down the computer. Disconnect the computer power cord and remove the

cover.

Inhaltsverzeichnis

Andere Iomega Lagerung Handbücher

Iomega

Iomega eGo 34796 Bedienungsanleitung

Iomega

Iomega Ultramax 34389 Bedienungsanleitung

Iomega

Iomega MiniMax Bedienungsanleitung

Iomega

Iomega eGo Portable Bedienungsanleitung

Iomega

Iomega ZIP 250 Drive Bedienungsanleitung

Iomega

Iomega Zip USB Powered Drive Gebrauchsanweisung

Iomega

Iomega Floppy USB Drive Gebrauchsanweisung

Iomega

Iomega StorCenter px12-400r Bedienungsanleitung

Iomega

Iomega USB 2.0 Bedienungsanleitung

Iomega

Iomega HDD Bedienungsanleitung

Iomega

Iomega StorCenter px2-300d Bedienungsanleitung

Iomega

Iomega 250MB Zip Bedienungsanleitung

Iomega

Iomega ZIP drive 100 Bedienungsanleitung

Iomega

Iomega eGo 33832 Bedienungsanleitung

Iomega

Iomega Media Xporter 33992 Bedienungsanleitung

Iomega

Iomega eGo 35330 Bedienungsanleitung

Iomega

Iomega eGo Portable Bedienungsanleitung

Iomega

Iomega eGo 34895 Bedienungsanleitung

Iomega

Iomega TAPE250 Bedienungsanleitung

Iomega

Iomega UltraMax Pro Bedienungsanleitung

Iomega

Iomega Ditto Tape Drive Bedienungsanleitung

Iomega

Iomega Jaz Bedienungsanleitung

Iomega

Iomega Prestige 34807 Bedienungsanleitung

Iomega

Iomega Home Network Hard Drive Gebrauchsanweisung

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

LaCie

LaCie RUGGED RAID Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

HP StorageWorks MSL2024 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

LaCie

LaCie RUGGED MINI Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

LaCie

LaCie 12big Thunderbolt 3 Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

HP P9000 Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung