ION ICUE Bedienungsanleitung

Confidential ION Audio Service Manual

ION Audio

iCUE

[iCUE]

Service Manual

v1.0

2012.07.24

The information in this document contains privileged and confidential information. It is intended

only for the use of those authorized by ION Audio. If you are not the authorized, intended

recipient, you are hereby notified that any review, dissemination, distribution or duplication of this

document is strictly prohibited. If you are not authorized, please contact ION Audio and destroy

all copies of this document. You may contact ION Audio at [email protected].

ATTENTION!

THIS DOCUMENT CONTAINS SENSITIVE

PROPRIETARY INFORMATION.

ALL RECIPIENTS MUST HAVE A CURRENT

NON-DISCLOSURE AGREEMENT ON FILE

WITH ION AUDIO.

DO NOT MAKE ILLEGAL

COPIES OF THIS DOCUMENT

Confidential ION Audio Service Manual

PREFACE

This document is intended to assist the service technician in the operation, maintenance and

repair of the ION Audio device. Together with the User Reference Manual, this document

provides a complete description of the functionality and serviceability of the Device. Any

comments or suggestions you may have pertaining to the document are welcome and

encouraged.

READ THIS!

In addition to any purchase price that ION Audio may charge as consideration for ION Audio

selling or otherwise transferring this service manual (“Manual”) to you, if you are not a service and

repair facility (“Service Center”) authorized by ION Audio in writing to be an authorized Service

Center, ION Audio sells or transfers the Manual to you on the following terms and conditions:

Only Service Centers authorized by ION Audio in writing are authorized to perform service and

repairs covered by an ION Audio warranty (if any), and transfer of the Manual to you does not

authorize you to be an authorized Service Center. Therefore, if you perform, or if the Manual

is used to perform, any service or repairs on any ION Audio product or part thereof, any

and all warranties of ION Audio as to that product and any service contract with ION Audio

for that product shall be voided and shall no longer apply for such product, even if your

services or repairs were done in accordance with the Manual.

All service or repairs done by you or with reference to the Manual shall be solely your

responsibility, and ION Audio shall have no liability for any such repairs or service work. All such

service or repairs are performed at the sole risk of the person performing the service or

repairs. You agree that all such work will be performed in a competent, professional and safe

manner at all times and to indemnify and fully hold ION Audio and its successors and assigns

harmless in the event of any failure to so perform.

Your purchase of the Manual shall be for your own ultimate use and shall not be for purposes of

resale or other transfer.

As the owner of the copyright to the Manual, ION Audio does not give you the right to copy the

Manual, and you agree not to copy the Manual without the written authorization of ION Audio.

ION Audio has no obligation to provide to you any correction of, or supplement to, the Manual, or

any new or superseding version thereof.

ION Audio shall have the right to refuse to sell or otherwise transfer repair parts or materials to

you in its sole discretion. You shall not use, sell or otherwise transfer spare or replacement parts

supplied by ION Audio to you (i) to repair or be used in products manufactured for or by third

parties or (ii) to any third parties for any purpose.

You shall not make any warranties or guarantees with respect to the products of ION Audio or the

use thereof on behalf of ION Audio or in your own name.

The foregoing describes the entire understanding related to sale or transfer of the Manual to you,

and no other terms shall apply unless in a writing signed by an authorized representative of ION

Audio.

All Trademarks are property of their respective companies.

Confidential ION Audio Service Manual

WARNINGS

TO REDUCE THE RISK OF ELECTRIC SHOCK OR FIRE, DO NOT EXPOSE

THIS PRODUCT TO WATER OR MOISTURE.

The arrowhead symbol on a lightning flash inside a triangle is

intended to alert the user to the presence of uninsulated "dangerous

voltage" within the enclosed product which may be of sufficient

magnitude to constitute a risk of electric shock to persons.

The exclamation point inside a triangle is intended to alert the user

to the presence of important operating, maintenance and servicing

instructions in the literature which accompanies the product.

REPAIR BY ANY PERSON OR ENTITY OTHER THAN AN AUTHORIZED ION

AUDIO SERVICE CENTER WILL VOID THE ION AUDIO WARRANTY.

PROVISION OF THIS MANUAL DOES NOT AUTHORIZE THE RECIPIENT TO

COMPETE WITH ANY ION AUDIO DISTRIBUTOR OR AUTHORIZED REPAIR

SERVICE CENTER IN THE PROVISION OF REPAIR SERVICES OR TO BE

OR MAKE REPAIRS AS AN AUTHORIZED SERVICE CENTER.

ALL REPAIRS DONE BY ANY ENTITY OTHER THAN AN AUTHORIZED ION

AUDIO SERVICE CENTER SHALL BE SOLELY THE RESPONSIBILITY OF

THAT ENTITY, AND ION AUDIO SHALL HAVE NO LIABILITY TO THAT

ENTITY OR TO ANY OTHER PARTY FOR ANY REPAIRS BY THAT ENTITY.

Regarding the Power Supply Fuse

CAUTION: The product under service may employ the use of a

replaceable fuse. Danger of fire or electrocution if fuse is incorrectly

replaced. Replace with only the same type or equivalent type

recommended by the equipment manufacturer.

Regarding the Internal Battery

CAUTION: The product under service may employ the use of a

internal battery. Danger of explosion if battery is incorrectly

replaced. Replace only with the same or equivalent type

recommended by the manufacturer. Dispose of used batteries

according to the manufacturer's instruction.

Confidential ION Audio Service Manual

Safety Instructions

Carefully read the applicable items of the operating instructions and these safety suggestions

before using this product. Use extra care to follow the warnings written on the product itself and in

the operating instructions. Keep the operating instructions and safety suggestions for reference in

the future.

1. Power Source. The product should only be connected to a power supply which is described

either in the operating instructions or in markings on the product.

2. Power Cord Protection. AC power supply cords should be placed such that no one is likely to

step on the cords and such that nothing will be placed on or against them.

3. Periods of Non-use. If the product is not used for any significant period of time, the product's

AC power supply cord should be unplugged from the AC outlet.

4. Foreign Objects and Liquids. Take care not to allow liquids to spill or objects to fall into any

openings of the product.

5. Water or Moisture. The product should not be used near any water or in moisture.

6. Heat. Do not place the product near heat sources such as stoves, heat registers, radiators or

other heat producing equipment.

7. Ventilation. When installing the product, make sure that the product has adequate

ventilation. Improperly ventilating the product may cause overheating, which may damage the

product.

8. Mounting. The product should only be used with a rack which the manufacturer

recommends. The combination of the product and rack should be moved carefully. Quick

movements, excessive force or uneven surfaces may overturn the combination which may

damage the product and rack combination.

9. Cleaning. The product should only be cleaned as the manufacturer recommends.

10. Service. The user should only attempt the limited service or upkeep specifically described in

the operating instructions for the user. For any other service required, the product should be

taken to an authorized service center as described in the operating instructions.

11. Damage to the Product. Qualified service personnel should service the unit in certain

situations including without limitation when:

a. Liquid has spilled or objects have fallen into the product,

b. The product is exposed to water or excessive moisture,

c. The AC power supply plug or cord is damaged,

d. The product shows an inappropriate change in performance or does not operate

normally, or

e. The enclosure of the product has been damaged.

Confidential ION Audio Service Manual

This product shares the

design of Numark's

Total Control [KC0].

SPECIFICATION

FUNCTION

1. Scratch Whrrld……………………………..Works for setting cue point and scratching only.

2. LOOP………………………………………automatically loops a given time (like Pioneer safety loops).

3. Treble/Middle Bass…………………………EQ control. Push function of knob allows instant frequency kill.

4. Crossfader…………………………………..mixes between channels.

5. Parameter Knob……………………………..assignable to adjust effects. Has push function for added control.

6. SYNC………………………………………..Forces BPM alignment to opposing deck.

7. Tempo Slider………………………………...permanently sets speed (BPM).

8. Tempo Bend…………………………………momentarily adjusts speed.

9. KEY…………………………………………Locks key to natural recorded key (Master Tempo).

SERVICE MANUAL

MODEL:TOTAL CONTROL

DISASSEMBLY PROCEDURES





                                     

(A) REMOVE 8 PCS OF SCREW TO DISCONNECT FRONT PANEL AND REAR PANEL.

(A)

(B)

(C)

Fig.1

                             

(A). REMOVE 6 PCS OF SCREW TO DISCONNECT BOTTOM CHASSIS.

(A)

Fig.2

DISASSEMBLY PROCEDURES

                                       

(A) REMOVE 5 PCS OF VR KNOB.

(B) REMOVE 1 PC OF NAME PLATE.

(

)

REMOVE 6 PCS OF SCREW FROM PITCH FADER AND CROSS FADER.

(D) DISCONNECT 3 PCS OF CONNECTOR TO REMOVE PITCH FADER PCB AND CROSS FADER PCB

Fig.3

DISASSEMBLY PROCEDURES

                                                         

(A) REMOVE 3 PCS OF SCREW FROM POWER PCB.

(B) DISCONNECT 2 PCS OF CONNECTOR TO REMOVE POWER PCB.

(D) DISCONNECT 2 PCS OF CONNECTOR TO REMOVE SENSOR PCB.

(E) REMOVE 4 PCS OF SCREW FROM LINE FADER PCB.

(F) DISCONNECT 2 PCS OF CONNECTOR TO REMOVE LINE FADER PCB.

Fig.4

DISASSEMBLY PROCEDURES

                        

(A) REMOVE 18 PCS OF SCREW FROM MAIN PCB.

(B) DISCONNECT 3 PCS OF CONNECTOR TO REMOVE MAIN PCB.

Fig.5



Andere Handbücher für iCUE

Inhaltsverzeichnis

Andere ION DJ-Equipment Handbücher

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung

KAM

KAM DMX Laser80 FScan Bedienungsanleitung

ION iCUE Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken