ION Block Party Ultra Bedienungsanleitung

Block Party Ultra

Quickstart Guide English ( 3 – 10 )

Guía de inicio rápido Español ( 11 – 18 )

Guide d’utilisation rapide Français ( 19 – 26 )

Guida rapida Italiano ( 27 – 34 )

Schnellstart-Anleitung Deutsch ( 35 – 42 )

Snelstartgids Nederlands ( 43 – 50 )

Appendix English ( 51 )

Quickstart Guide (English)

Introduction

Thank you for purchasing the Block Party Ultra. At ION, your entertainment is as important to

us as it is to you. That’s why we design our products with one thing in mind—to make your life

more fun and more convenient.

Box Contents

Block Party Ultra

Microphone and Cable

1/8” (3.5 mm) Stereo Aux Cable

Power/Charging Cable

Remote Control

Quickstart Guide

Safety & Warranty Manual

Support

For the latest information about this product (documentation, technical specifications, system

requirements, compatibility information, etc.) and product registration, visit ionaudio.com.

For additional product support, visit ionaudio.com/support.

Rechargeable Batteries

Rechargeable lead-acid batteries are the same type used in automobiles. As with your car

battery, how you use this battery has a significant impact on its lifespan. With proper use and

treatment, a lead-acid battery can last for years. Here are some recommendations for getting

the longest life from the internal battery.

General Usage Fully charge the battery before using it.

Charge the battery completely after each use.

Storage For best product longevity, do not store at exceedingly hot (greater than

90°F/32°C) or exceedingly cold (less than 32°F/0°C) temperatures.

It is acceptable to leave your sound system plugged in. This will not

overcharge the battery.

If you leave the battery level low and do not charge it for 6 months, it may

permanently lose capacity.

Repair If the battery fails to charge, check your fuse near the power cable input. If your

fuse is intact and it still will not charge, contact ION Audio at ionaudio.com.

Disposal Bring the unit to a recycling center or dispose of in accordance with local

ordinances.

iPA115

BLOCK PARTYULTRA

MIC1 MIC2

AUXIN

LINK OUT

CHARGE

INPUT RANGE FUSE

100-240~50/60HZ,120W T2AL 250V

5V 1A

Quick Setup

1. Make sure all items listed in the Box Contents are included in the box.

2. Read the Safety & Warranty Manual before using the product.

3. Make sure the battery is completely charged prior to first use for maximum battery life.

4. Study the Connection Diagram.

5. Ensure the Master Volume on Block Party Ultra is at zero.

6. Connect your devices.

7. Raise the volume to a comfortable level.

8. Return the Master Volume to zero when you are finished using Block Party Ultra.

Connection Diagram

Items not listed under Introduction >Box Contents are sold separately.

Power

Bluetooth

Device

Microphone

Tablet, MP3

pla

er, etc.

Features

Front Panel

1. Power Button: Press and hold to turn Block Party Ultra on or off. Please note that while

Block Party Ultra is connected to a power source, it does not need to be powered on to

charge the battery. When the power is on, the display will show the power indicator.

2. Bluetooth Button: Press and release the Bluetooth button to disconnect a paired

Bluetooth device. See Pairing a Bluetooth Device for more details.

3. Play/Pause: Press to play or pause a track from a connected Bluetooth device.

4. Voice Effect On/Off: Press this button to activate/deactivate the built-in effects. The built-

in effects are applied to both microphone inputs.

5. Voice Type: Press this button to select an effect category. See Operation > Effects for a

complete list of available effects.

6. Voice Effect ►:Press this button to select the next effect.

7. Voice Effect ◄:Press this button to select the previous effect.

8. Top Light On/Off: Press this button to turn the dome lights on/off. See Operation > Light

Modes for more details.

9. Speaker Light On/Off: Press this button to turn the woofer lights on/off. See Operation >

Light Modes for more details.

10. Bass Boost: Press this button to enhance the overall bass frequency response.

11. Master Volume Control: This adjusts the speaker’s main mix volume, which includes the

Microphone Input, Auxiliary Input, and the audio of a paired Bluetooth device.

12. Mic Volume: Adjusts the input gain for the connected microphones.

Display Features

•Charging Indicator: When the power cable is connected, movement of the battery

segments shows the battery is charging. When fully charged, all battery segments will be

lit without blinking. When the power cable is disconnected, the battery segment shows the

level of the battery.

•Lightning Bolt Icon: The lightning bolt icon will illuminate when the power cable is

connected to wall power.

•Bluetooth Icon: The Bluetooth icon will be lit solid when a device is paired to Block Party

Ultra.

•Power Icon: The power icon will be lit when Block Party Ultra is powered on. The power

icon will not be lit when Block Party Ultra is powered off.

•Bass Boost Icon: The Bass Boost icon will be on when the Bass Boost function is

activated. The icon will be off when the function is deactivated.

Rear Panel

1. Microphone Inputs: These mono inputs accept a

1/4” (6.35 mm) input such as a microphone, guitar,

or other musical instrument.

2. Auxiliary Input: This stereo 1/8” (3.5 mm) input can

be used to connect a CD player, MP3 player, or

other audio source.

3. Speaker Link: Connect two or more Block Party

Ultra’s together using a 1/8” (3.5 mm) stereo aux

cable from the Speaker Link of one Block Party

Ultra to the Aux Input of the second Block Party

Ultra.

4. USB Charging Port: Connect your device’s charge cable here to charge it. USB charging

only functions when the unit’s power is turned on.

Note: To charge smartphones and tablets faster, put the device’s screen to sleep.

5. Power Cable Input: Insert the included power cable here to charge the unit. Note that the

Block Party Ultra can be used with the power cable while it simultaneously charges the

battery.

iPA115

BLOCK PARTY ULTRA MIC1 MIC2

AUXIN

LINK OUT

CHARGE

INPUT RANGE FUSE

100-240~50/60HZ,120W T2AL 250V

5V 1A

Operation

Remote Control

Use the remote control to select individual colors, and power

the lights on/off. Point the remote control at the front sensor

on the dome light and press the button of the option you

would like to select. See Light Modes for more details.

Note: Before using the remote control for the first time, pull

out the tab attached to the battery compartment. To change

the remote control battery, follow the diagram located on the

back of the remote control. Use a 3V DC CR2025 lithium

button cell battery for replacement.

•On/Off = Switches the dome and cone lights on or off.

•R On/Off = Switches the red color on or off.

•G On/Off = Switches the green color on or off.

•B On/Off = Switches the blue color on or off.

•W On/Off = Switches the white color on or off.

•P On/Off = Switches the purple color on or off.

•O On/Off = Switches the orange color on or off.

•R Only = Switches only the red color on.

•G Only = Switches only the green color on.

•B Only = Switches only the blue color on.

•W Only = Switches only the white color on.

•P Only = Switches only the purple color on.

•O Only = Switches only the orange color on.

•Still = See the Light Modes section for Mode details.

•Fade = See the Light Modes section for Mode details.

•Flash = See the Light Modes section for Mode details.

•All On/Off = Switches all colors on/off.

•Top = Turns the dome lights on.

•Spkr (speaker) = Turns the cone lights on.

Light Modes

Select from one of the light modes for the dome and woofer lights using the remote control.

Individual color buttons can be de-selected to have only the colors you want displayed without

interrupting the mode.

Dome Lights

When the Top Light button is pressed, the colors will turn on and slowly cycle through

different color combinations. Press the Top Light button again to have the colors quickly cycle

through different color combinations. When music begins to play, the lights will react to the

beat of the music, cycling to the different color combinations. At any time, a color can be

selected to toggle that color on or off. Pressing All Off will turn all colors off. Then, select

which colors you wish to illuminate. Press the Fade button to create fading effects, slowly

cycling from one color to the next. Press the Flash button to create flash effects. If the Top

Light button is pressed again, the lights will turn off. When the Still button is pressed, all 6

colors are on, and the lights are static (no motion). At any time, a color can be selected to

toggle that color on or off. Pressing All Off will turn all colors off. Then, select which colors you

wish to illuminate.

Woofer (Cone) Lights

When the Speaker Light button is first pressed, the colors will slowly fade from one color to

the next. If the Speaker Light button is pressed again, the lights will quickly change color along

with the beat of the music. If the Speaker Light button is pressed again, the lights will turn off.

Pairing a Bluetooth Device

1. Turn on your Bluetooth device.

2. Power on Block Party Ultra.

3. Navigate to your Bluetooth device’s setup screen, find Block Party Ultra and connect.

Note: If your Bluetooth device prompts for a pairing code, enter “0000”.

4. To disconnect pairing while the Bluetooth icon is lit solid, press the Bluetooth button.

5. To connect to another Bluetooth device, repeat step 3.

Connecting Two Speakers

To link two Block Party Ultra speakers:

1. Plug a 1/8” (3.5 mm) cable into the Speaker Link output located on the rear panel of one

Block Party Ultra.

2. Plug the other end of the 1/8” (3.5 mm) cable into the 1/8” Aux input of another Block

Party Ultra.

3. Power on both speakers. Use the Mic Volume on the second speaker to adjust the input

signal level.

Effects

FX Group C: Gender Effects

1. Barry

2. Male to Female

3. Female to Male

4. Pop Eye

5. Olive

6. Tinker Bell

7. Octivator

8. Prankster

9. Munchkin

10. Way Down

11. Ventriloquist

12. Hip Deep

13. Stadium

14. Station

15. David & Goliath

FX Group A: Core Effects

1. Super Star

2. On Stage

3. Auto-Pain

4. Modern Pop Tuned

5. Star

6. Super Group

7. Arena

8. Lead Singer

9. Grunge

10. Modern Rap

11. Classic Rap

12. Rock Out

13. Rockabilly

14. Church

15. Cathedral

FX Group B: Harmony Effects

1. Barbershop

2. Chapel Girls

3. Trio

4. Bohemian

5. Rhapsody

6. Group Harmony

7. Tuned Girls

8. Girl Pop

9. Tuned Girl Group

10. Tuned On Stage

11. Angelic Choir

12. Country Ladies

13. Country Gent

14. Hmmmm

FX Group D: Novelty Effects

1. D-Vader

2. Aliens

3. Flea

4. Froggy

5. Little Robot

6. Evil Robot

7. Robot Chorus

8. Monster

9. Psycho

10. Warehouse

11. Flange

12. Telephone

13. Echo

14. Big Echo

15. Grand Canyon

Troubleshooting

If the unit is not charging: Make sure the power cable is properly connected to the power

input and the power outlet.

If the sound is distorted: Try lowering the volume control of your sound source, musical

instrument, or microphone. Also, try to reduce the overall volume of Block Party Ultra using

the Master Volume knob.

If there is too much bass: Try adjusting the tone or EQ control on your sound source to lower

the bass level. This will allow you to play the music louder before clipping (distortion) occurs.

If there is a high-pitched whistling noise when using microphones: This is probably

feedback. Point the microphone away from the speaker.

If you can’t hear the microphone over the music volume: Turn down the music volume

from your source.

If you can’t play music from a flash drive: The USB port is only for charging USB devices.

If you cannot connect your audio device to Block Party Ultra via Bluetooth:

•Have your audio device (e.g., smartphone or tablet) and Block Party Ultra as close

together as possible while trying to connect. Make sure both the audio device and Block

Party Ultra are unobstructed by walls, furniture, etc.

•Reset the Bluetooth connection on Block Party Ultra to disconnect Block Party Ultra from

any other audio device and restart the search process. If this does not work right away,

power off Block Party Ultra and then power it back on. See Pairing a Bluetooth Device

for more information.

•Reset the Bluetooth connection on your audio device by turning Bluetooth off and back

on. You can find this under the Bluetooth menu in the Settings for your phone or other

audio device.

If this does not work, and you have connected to Block Party Ultra before, find Block

Party Ultra in the list of available or previously connected devices in your audio device's

Bluetooth menu, tap the "gear" or “i” icon located next to it and then select Unpair or

Forget. Turn Block Party Ultra off and back on and try pairing again once it reappears in

your available devices list.

Note: If Block Party Ultra has been paired to another audio device recently that is still

within range, you may need to repeat this process with that audio device to fully

disconnect.

Inhaltsverzeichnis

Sprachen:

Andere ION Sprecher Handbücher

ION

ION Job Rocker Max Bedienungsanleitung

ION

ION ISP32 Bedienungsanleitung

ION

ION Trailblazer Bedienungsanleitung

ION

ION TOTAL PA GLOW Bedienungsanleitung

ION

ION Explorer Bluetooth Bedienungsanleitung

ION

ION Surf Bedienungsanleitung

ION

ION TOTAL PA ULTIMATE Bedienungsanleitung

ION

ION Trailblazer Bedienungsanleitung

ION

ION Trio LP Bedienungsanleitung

ION

ION Luxe LP Bedienungsanleitung

ION

ION Pro Glow Duo 8 Bedienungsanleitung

ION

ION Dunk Bedienungsanleitung

ION

ION Pathfinder Bedienungsanleitung

ION

ION Tiki Sounds Bedienungsanleitung

ION

ION Mustang LP Bedienungsanleitung

ION

ION Sport Bedienungsanleitung

ION

ION Total PA Live Bedienungsanleitung

ION

ION PATHFINDER GO Bedienungsanleitung

ION

ION ROAD ROCKER Bedienungsanleitung

ION

ION TAILGATER GO Bedienungsanleitung

ION

ION PARTY BOOM PLUS Bedienungsanleitung

ION

ION PARTY ROCKER Bedienungsanleitung

ION

ION Pro Glo 10 Bedienungsanleitung

ION

ION Pickup Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung