IPECS LIP-8012D Bedienungsanleitung

STG

LIP Keyset User Operation

The following is provided as quick reference for commonly used features/functions. Complete instructions

are included in the User Guide.

Placing a Call:

ICM Line –

•Lift handset or press SPEAKER button.

•Dial the extension number from the keypad.

CO Line –

•Lift handset or press SPEAKER button.

•Press CO/IP line, or dial access number.

•Dial desired phone number.

Using Camp-On:

•When calling a busy Station, press *.

•Wait for party to answer.

To retry a busy external number until answered:

•When placing an outgoing call to a busy party, use the Navigation button to display the next menu, and

press the ACNR Soft button.

•Hang-up handset; the call will be completed when busy party returns to idle state.

Delete ACNR:

•Press the STOP Soft button.

Answering a Call while idle:

ICM Line –

•Lift handset, or if in HF mode, just speak.

CO Line –

•Lift handset, and press flashing Flex button (as needed).

•MUTE - (toggle) press to stop sound on a call.

•VOL ST– press to adjust sound on a call.

Answering a Call while busy:

•Press the Hold/Save button.

•Press the flashing CO button.

STG

Using Do Not Disturb (DND):

•Press the DND button (toggles ON and OFF).

Pickup a Call to another Station:

•Lift handset.

•Dial 7 (Directed Call Pick-up Code).

•Dial the intercom number of the ringing station.

Pickup a Call from another Station in your Group:

•Lift the handset.

•Dial 566 (Group Call Pickup code)

Conference:

•Place first call.

•Press Conf. Soft button.

•Place second call.

•Press Conf. Soft button twice.

Call Hold:

•Press the HOLD/SAVE button while on a call or conference.

•Press the flashing CO button or Loop button to rejoin call, or Conf. Soft button to rejoin Conf.

Call Forward:

•Lift handset.

•Press FWD soft button.

•Dial the type of forward code (0-5).

1=Unconditional, 2=Busy, 3=No Answer, 4=Busy/No Answer, 5=Incoming CO Offnet (Attendant only),

0=remote

•For Forward code 1-4, dial destination number.

•For Forward code 5, press CO/CO-Group button, and dial Speed number.

•For Forward code 0, dial password of forwarded station and enter the Forward code (1-4).

1=Unconditional, 2=Busy, 3=No Answer, 4=Busy/No Answer.

- Dial the destination number.

STG

Delete Call Forward:

•Lift handset.

•Press the FWD soft button.

•Dial #.

Call Transfer:

•While on an active call, press the TRANS/PGM button.

•Place call to the transfer destination.

•Remain on the line to announce the call and/or hang-up to complete the transfer.

Using Call Log:

•Press LOG soft button to access Call History.

•Press Navigation STbutton to select a listing.

•Press Send to place a call to that party.

Save Caller information to Directory:

•Press LOG soft button to access Call History.

•Press Navigation STbutton to select a listing.

•Press Select Soft button, and Save Soft button to add that party’s information to the directory.

Change Phone Profile:

•Press MENU button.

•Dial 4, and enter password.

•Dial # (toggles between Profile #1 and #2).

Adjust LCD Contrast:

•While idle, press the VOL STbuttons to change the screen contrast (brightness level).

Change LCD Font:

•Press MENU button.

•Dial 18 (Dual Font Code).

•Press the Navigation STbuttons to select.

•Press the OK Soft button.

STG

Bluetooth:

Refer to User Guide for full instructions on registering and pairing Bluetooth devices (for use with LIP-

8024D, and LIP-8040L)

•Press PGM button.

•Dial * 9 (Bluetooth Enable/Disable Code).

•Dial 1 (ON) or 0 (OFF).

•Press HOLD/SAVE.

Menu Program Codes

Code Function

11 Station Name Program

12 ICM Ring

13 CO Ring

14 Password Program

15 Language Program

16 STA Ring Download

17 Back Light

18 Font Program

21 Create Conference Room

22 Delete Conference Room

31 Send Message

32 Inbox

4 Network Configuration

0 Attendant

STG

Flex Button Program

•Press the TRANS/PGM button.

•Press the flexible button to be programmed.

•Press TRANS/PGM button and User Program Code (refer to table).

•Press the HOLD/SAVE button.

User Program Codes

Code Function Remark

10 Enblock Mode Dialing

11 Intercom Ring Select Ring Tone 1-8

12 CO/IP Ring Select Ring Tone 1-8

13 Intercom Answer Mode Select ICM Signal mode, 1:HF, 2:Tone, 3:Privacy

14 Call Coverage Attribute Setting 1:ON/OFF, 2:Ring Delay (0-9)

15 Station Ring Download Ring Tone 0-9

19 Ear & Mic Headset

21 Knock Down STA COS SLT

22 Restore Station COS Requires Auth Code

23 Walking COS May require Auth Code

30 VM Mobile Notify

31 Station Wait Retrieve SLT

32 CLI/IP Message Wait Retrieve SLT

33 Authorization Code (Password) Entry Input up to 12 digits

34 DID Call Wait Button

35 Message Wait in Exec/Sec Pair

36 Send SMS Message

37 Register Mobile Ext.

38 Activate Mobile Ext.

39 Register Mobile Ext. CLI

41 Set Wake Up Time SLT; Input time, 24-hr clock

42 Erase Wake-Up Time SLT

- continued on back panel -

STG

User Program Codes (cont.)

Code Function Remark

51 Custom/Pre-defined Message Display SLT; Select Message 00-20

52 Register Custom Message (Message 00) Input up to 24 characters

53 Create Conf. Room

54 Delete Conf. Room

55 Monitor Conf-Group

61 Headset/Speakerphone

62 Headset Ring Mode 1:Speakerphone, 2:Headset, 3:Both

71 LCD Display Mode

72 Version Display

73 Background Music

74 Station Name Reg. SLT; Input up to 7 characters

75 Display Phone IP Address

76 Change Phone IP Address

77 Display Phone MAC IP Address

78 Change Mode

79 Display Phone Version

80 RECORD Button Requires VSF/External SMDI VM

84 Account Code Button

85 LOOP Button

86 ATD Intrusion Button

87 ICM Button

88 Camp-On Button

89 Keypad Facility Button

91 CONF Button

94 FLASH Button

95 MUTE Button

96 MONITOR Button

97 REDIAL Button

98 FWD Button

99 PTT Button

9* xx In-Room Indication Button (xx : 01~10)

*0 Hot Desk Login Code

** Hot Desk Logout Code

*7 Force Fwd to Dest.

*8 Register Bluetooth

*9 Bluetooth Usage

Andere Handbücher für LIP-8012D

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere iPECS Telefon Handbücher

iPECS

iPECS LDP-9008D Bedienungsanleitung

iPECS

iPECS LIP-7004N Bedienungsanleitung

iPECS

iPECS LDP-7000 Series Bedienungsanleitung

iPECS

iPECS LDP-9030D Bedienungsanleitung

iPECS

iPECS WIT-400HE Bedienungsanleitung

iPECS

iPECS iPECS 7016D Bedienungsanleitung

iPECS

iPECS LIP-8004D Bedienungsanleitung

iPECS

iPECS LDP-9200 series Bedienungsanleitung

iPECS

iPECS LDP-9240D Technisches Datenblatt

iPECS

iPECS LIP-8004D Bedienungsanleitung

iPECS

iPECS LIP-8008E Bedienungsanleitung

iPECS

iPECS LIP-7004N Bedienungsanleitung

iPECS

iPECS LIP-8004D Service-Handbuch

iPECS

iPECS 9010 Bedienungsanleitung

iPECS

iPECS LIP-8012E Bedienungsanleitung

iPECS

iPECS LIP-7016D Bedienungsanleitung

iPECS

iPECS LDP-9030D Bedienungsanleitung

iPECS

iPECS LIP-9010 Bedienungsanleitung

iPECS

iPECS LIP-9071 Bedienungsanleitung

iPECS

iPECS LIP-8012D Bedienungsanleitung

Beliebte Telefon Handbücher anderer Marken

GE 2-9480 Bedienungsanleitung

Geemarc

Geemarc PHOTOPHONE 155 Bedienungsanleitung

Interquartz

Interquartz Gemini IQ333 Bedienungsanleitung

SSS Siedle

SSS Siedle HT 840-0 Bedienungsanleitung

Motorola

Motorola TITANIUM Bedienungsanleitung

Panasonic

Panasonic ICX Bedienungsanleitung

LG H870DS Bedienungsanleitung

Samsung

Samsung GT-I9500 Bedienungsanleitung

AT&T

AT&T Trimline 205 Bedienungsanleitung

Selta

Selta zenyth 600 Bedienungsanleitung

Doro

Doro AFTI 20 Bedienungsanleitung

UNIQCELL

UNIQCELL A1 Bedienungsanleitung

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Bedienungsanleitung

BT Decor 425 Bedienungsanleitung

NEC

NEC SV8500 Bedienungsanleitung

Teledex

Teledex PEARL Bedienungsanleitung

Ericsson

Ericsson Dialog 3213 Bedienungsanleitung

Yealink

Yealink VP530 Bedienungsanleitung