IpTime IP0416 Bedienungsanleitung

User’sGuide

www.zioncom.net

Quick Start Guide

BROADBAND ROUTER

ipTIME IP0416

2WAN-QoS-VPN-NAT·DHCP·FIREWALL·

10/100Mbps SWITCH

Version 1.36

-1-

User’sGuide

www.zioncom.net

BEFORE INSTALLATION

1. Firstly please confirm your computer OS (Windows 95,98,NT,ME,2000,

XP, Linux, Mac) and Web browser (Internet Explorer 4.0 with JavaScript

function、Netscape Navigator 4.0 or above version).

2. Make sure there is LAN Card which has been correctly installed in your

computer.

3. If you are xDSL user, please remember your user ID and password.

4. If you connect Internet by LAN or MAN, please get following information

from your network administrator: IP address is static or dynamic, DNS,

default gateway, account and so on.

＊If your computer has installed ADSL PPPoE dial-up software before the

installation of Broadband Router, please backup your installation software and

uninstall your ADSL PPPoE dial-up software by Start->control panel->Add or

Remove Programs.

INSTALLATION

1. Connect broadband cable (xDSL, Cable Modem or LAN/ Leased cable)

with WAN port of Broadband Router.

2. Connect your computer LAN card’s port or your switch UPLINK port

with one LAN port of Broadband Router by a common network cable.

3. Connect other PC to available LAN ports

4. Connect the power supply to the router. It comes to self-detect state.

After correct startup, RUN LED blink slowly. The router enters to its

normal work state.

Note: All LAN ports of Broadband Router can automatically sense cross

cable, so you can either use through cable or cross cable to connect LAN

card or switch.

-2-

User’sGuide

www.zioncom.net

LOCAL COMPUTER SET UP

By default, the DHCP server is activated. This makes easier the setting up

of your computer to access and configure the router. We give here an example

for PC running Windows XP. Please refer to user’s manual on the CD if your

computer is running other system.

The default configuration of Broadband Router is:

— IP address：192.168.0.1

— Subnet Masks：255.255.255.0

Users can setup static or dynamic IP configuration.

Windows XP SETUP

(1) Start Windows XP.

(2) Click “Start”->“ Panel Control”

(3) Double click the “Network and Internet Connections” in “control

panel”.

(4) Click “Network connection”->“local area

connection”->“properties”-> “Internet protocol（TCP/IP）”and

“Properties”.

(5) Click “General ” , Select “Obtain an IP address automatically” and

“Obtain DNS server address automatically”

(6) Click “OK”

(7) Restart Windows XP

-3-

User’sGuide

www.zioncom.net

BROADBAND ROUTER SETUP

START INTERNET EXPLORER TO LOGIN

Run Internet Explorer, and click the “Stop “ button in Internet Explorer’s

toolbar. Input http://192.168.0.1 in Internet Explorer’s address bar.

 192.168.0.1 is Default IP address of Router.

You may see the login web page. Click “Login” button and make relative

configuration..

-4-

User’sGuide

www.zioncom.net

Conn. Type: BROADBAND ROUTER current connection type, Dynamic

IP is default value.

Conn. Status: Broadband Router current connection Status

WAN IP: BROADBAND ROUTER WAN current IP address

Connected PC: IP address of the computer which connects to

BROADBAND ROUTER.

PPPoE(ADSL) USER SETUP

This connection way is suitable for virtual dial-up Internet connection.

 Open external ADSL Modem and check the WAN LED of BROADBAND ROUTER.

If WAN LED is off, check the network cable between external modem and WAN port.

 Click “Basic setup “-> “WAN setup”, as follows:

 Select “PPPoE User (ADSL)” radio button.

 Key in the “User ID” and “Password” provided by your Internet service provider.

 Click the “Apply” button.

-5-

User’sGuide

www.zioncom.net

 The router will try to connect itself

 If “Conn. State” is “Successfully connected”, the configuration is correct.

 In case “Conn. Status” is “Invalid ID/password”, the configuration is incorrect.

Click the “close” button and check your ID& password.

 If “Conn. Status” keeps unchanged, check whether your service type is correct.

Other Configuration:

Keep all other parameters with their default value. Consult the user’s manual on the CD for

more information

Other types of connection:

For Cable modem, IP ADSL or static IP connection, please refer to the manual

Internet Wizard

You can also use the Internet Wizard to establish an internet connection.

-6-

User’sGuide

www.zioncom.net

the Internet Wizard will show this :

-7-

User’sGuide

www.zioncom.net

If you select “Automatic WAN configuration”, the router will automatic detect the WAN port

setting.

if you select “Manual WAN configuration, the next figure will show:

Now, you can select your Wan link, DHCP modem means the WAN port will receive a IP from

DHCP server. PPPoE means you can use PPPoE protocol to link the xDSL line. Static IP

means you must type in the IP address from ISP.

-8-

Andere Handbücher für IP0416

Inhaltsverzeichnis

Andere ipTime WLAN-Router Handbücher

ipTime

ipTime IP0416 Bedienungsanleitung

Beliebte WLAN-Router Handbücher anderer Marken

Milesight

Milesight UG67 Bedienungsanleitung

Airlogic

Airlogic AirSync Class 1 Betriebsanleitung

Samsung

Samsung WCH730B Bedienungsanleitung

TELEFONICA

TELEFONICA USB Adapter Bedienungsanleitung

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Bedienungsanleitung

Askey

Askey RAC2V1K Bedienungsanleitung

Alloy

Alloy WLF2454AP-S Bedienungsanleitung

TP-Link

TP-Link TL-WR542G Bedienungsanleitung

NETGEAR

NETGEAR WNR2000v4 Bedienungsanleitung

Hama

Hama 53120 Bedienungsanleitung

Intellinet

Intellinet 524582 Bedienungsanleitung

Asus

Asus RT-N10P Bedienungsanleitung

D-Link

D-Link DIR-506L Bedienungsanleitung

Sapido

Sapido GR297n Bedienungsanleitung

Asus

Asus DSL-N55U Bedienungsanleitung

AMTC

AMTC WR7502 Bedienungsanleitung

Compaq

Compaq CP-2W - iPAQ Connection Point Bedienungsanleitung

SMC Networks

SMC Networks WBR14-N2 FICHE Bedienungsanleitung