iPuray BRT-780 Bedienungsanleitung
Product Description of BRT-780 Page 1of 4
Shenzhen Asia Bright Industry co., Ltd., Building 10, Asia Industrial Park, Gangtou, Bantian, Shenzhen, China.
www.a-brt.com. [email protected].
© 2015 All rights reserved. Subject to change without notices.
Rotary Speed Control Switch with Socket
Model #：BRT-780
Features:
BRT-780 is a rotary speed control switch for all kind of fans or other appliances using motors. It
has an extension power cord and a socket for easy installation.
Can be used as a portable device or a wall mount unit;
Stepless speed control. Rotary knob for smooth speed adjustment;
Minimum speed setting. The minimum speed can be fine-tuned by the user to suit for all kind
of motors;
ABS-V0 flame resistance material; and
High quality builds.
Front View and Back View:
Fig. 1 and Fig. 2 show the front view and the back view of the BRT-780 speed control switch
respectively. It has a rotary control unit on the right and a standard socket on the left. It comes
with a power cord on the back.
Fig. 1 Front View Fig. 2 Back View
Product Description of BRT-780 Page 2of 4
Shenzhen Asia Bright Industry co., Ltd., Building 10, Asia Industrial Park, Gangtou, Bantian, Shenzhen, China.
www.a-brt.com. [email protected].
© 2015 All rights reserved. Subject to change without notices.
Applications:
BRT-780 rotary speed control switch can be used for all kinds of appliances driven by motors,
such as cooling fans, ventilation fans, blowers, etc. It has wide applications at various locations
such as homes, schools, laboratories, hospitals, bars, restaurants, etc.
Specification Parameters:
Input Voltage
220～240V(50Hz/60Hz)
Operation
Environment
No-condensation 20-90% RH，
-20℃～40℃
Load type
Motor
Wattage
150W
Dimension
176mm x 88mm x 43mm
Weight
470g
Wiring and Installation Guide:
When BRT-780 rotary speed control switch is used as a portable device, there is no need for
further wiring installation. Once the power cord of BRT-780 is plugged to a wall socket or
extension cord, it is ready to go.
When BRT-780 rotary speed control switch is used as a wall mount unit, the power cord can be
removed and the unit is directly wired to power lines. Please find Wiring and Installation
instructions as follows.
There are 5 wiring and installation steps (please refer to in Fig. 3):
Step one: Open the switch cover, and use a screwdriver to pry off the front plates on
lower edges;
Step two: Take off the screws to remove the bottom plate;
Step three: Take off the screws pointed by the red arrows to remove the cable clamp and
the power cord that comes with the unit;
Step four: Insert the wires into the terminal blocks and tighten the terminal block screws;
and
Step five: Reverse step 3, 2, and 1 to reinstall the cable clamp, the bottom plate, and
front plates. Finally, close the cover.
Product Description of BRT-780 Page 3of 4
Shenzhen Asia Bright Industry co., Ltd., Building 10, Asia Industrial Park, Gangtou, Bantian, Shenzhen, China.
www.a-brt.com. [email protected].
© 2015 All rights reserved. Subject to change without notices.
Operation Guide:
BRT-780 speed control switch is easy to operate. Once it is installed, plug the fan’s power cord to
the socket of BRT-780.
1. Turn on or turn off the fan and adjust fan speed: As shown in Fig. 4a, Rotating the
knob clockwise will turn on the fan and rotating the knob clockwise further more will reduce
the fan speed. When the fan is on, rotating the knob counter-clockwise will increase the fan
speed and rotating the knob counter-clockwise further more to the “Off” position will turn off
the fan; and
2. Set the minimum fan speed limit: As shown in Fig. 4b, the minimum fan speed can be
fine-tuned by using a dial on the side of BRT-780 during initial installation. Turn on the fan
Fig. 3 BRT-780 Installation Guide
Product Description of BRT-780 Page 4of 4
Shenzhen Asia Bright Industry co., Ltd., Building 10, Asia Industrial Park, Gangtou, Bantian, Shenzhen, China.
www.a-brt.com. [email protected].
© 2015 All rights reserved. Subject to change without notices.
and rotate the speed control knob to run the fan at minimum speed. Then, rotate the fine-tune
dial to obtain a minimum fan speed as desired.
a b
Fig. 4 Fan Speed Adjustment
Note: Adjusting the minimum speed is necessary for some motors, or the motor may not move
due to too low a driving voltage.
How to Order:
Please contact us: Shenzhen Asia Bright Industry Co., Ltd
Building 10, Asia Industrial Park, Gangtou, Bantian, Shenzhen, China
Tel: +86-755-89748200 +86-755-89748211
Fax: +86-755-89748778 +86-755-89748226
Email: sales@a-brt.com Website: www.a-brt.com
Inhaltsverzeichnis
Andere iPuray Schalten Handbücher
iPuray
iPuray BRT-701 Bedienungsanleitung
iPuray
iPuray BRT-784 Bedienungsanleitung
iPuray
iPuray BRT-320 Bedienungsanleitung
iPuray
iPuray BRT-782 Bedienungsanleitung
iPuray
iPuray BRT-F013-T Bedienungsanleitung
iPuray
iPuray BRT-109 Bedienungsanleitung
iPuray
iPuray BRT-706 Bedienungsanleitung
iPuray
iPuray BRT-704 Bedienungsanleitung
iPuray
iPuray BRT-604 Bedienungsanleitung
iPuray
iPuray BRT-603 Bedienungsanleitung
iPuray
iPuray BRT-108 Bedienungsanleitung
iPuray
iPuray BRT-112 Bedienungsanleitung
iPuray
iPuray BRT-106 Bedienungsanleitung
iPuray
iPuray BRT-607 Bedienungsanleitung
iPuray
iPuray BRT-408 Technische Daten
iPuray
iPuray BRT-110 Bedienungsanleitung
iPuray
iPuray BRT-115 Bedienungsanleitung
iPuray
iPuray BRT-707 Bedienungsanleitung
iPuray
iPuray BRT-111 Bedienungsanleitung
iPuray
iPuray BRT-105 Montageanleitung
