IRiver Cover Story Bedienungsanleitung
USER GUIDE
2nd IRIVER STORY
COVER STORY
Table of Content
Getting Started
Components
Locating the Controls
Power Management
Charging the Battery
Connecting the Product
Using iriver plus 4
Using Adobe Digital Editions
03
03
05
06
07
11
14
01
02
Using iriver story
Home Screen
Selecting Files
Viewing Files
Memo/Snapshot
Wi-Fi Service
Music
Recording
Dictionary
Setup
16
17
20
22
25
28
29
30
31
03
Other Information
Important Safety
Information
Troubleshooting
Copyrights
Certification
Registered Trademark
Exemption
33
35
37
48
48
48
Components
Getting Started
Player + Stylus Pen
Quick Start Guide: This is the manual explaining how to use our device.
Product Warranty: Please keep this in a safe place because you may
need it at the time of warranty repairs.
USB Cable: You can connect this to the computer and use it to
recharge the power.
03
Components may be changed without prior notice for improvement of
product performance or quality.
Quick Start Guide
& Product warranty
USB Cable
Home
Locating the Controls
The exterior and the contents printed or engraved may differ by model
or according to the name of each part.
Menu Stylus Pen
EPD
Previous
Previous/Next Pages
Volume
Speaker
SD Card SlotPower
USB Port
Earphones Jack
MIC
Recharge LED
04
Power:You can turn the power off by pressing and holding it for a while.
You can switch to the standby mode by pressing it briefly.
Home: Indicates the initial screen.
Menu: Shows the menu list during mode operation.
Previous: Stands for previous screen.
Previous/Next Page
:
Shows the previous/next page on file list or file viewing.
Stylus Pen: This is the pen-shaped writing apparatus used when you
touch the screen.
EPD: The screen that feels and reads like a paper-based book.
Earphone Jack: You can listen to the sound by connecting an
earphone to it.
USB Port: You can use this to connect using a USB cable and the
computer, or to recharge the battery.
SD Card Slot:You can connect this to the SD card to view and replay
the files on the card.
MIC: You can record your voice through it.
Recharge LED: Once power recharge is completed, the recharge
LED light is turned off.
Volume: Controls the sound volume.
Speaker: Used to reproduce the sound.
Getting Started
05
1. Press and hold the [ ] and the power comes on.
2. If you press and hold the [ ] when the product is turned on,
then the power will be turned off.
This model supports an automatic power-saving feature to minimize battery
consumption. Depending on the power-saving mode settings, the product will
be automatically turned off if keys are not operated for a given time.
(refer to page 32)
Turning on/off
Power Management
1. If you press the [ ] key briefly when the product is on, you can
switch to standby mode.
2. If you press the [ ] key briefly again, standby mode is terminated.
Switching to Standby Mode
1. If the product does not respond to key presses, reset it by pressing
the [ ] + [ ] keys for more than six seconds.
Using the Reset Function
Even if you use reset function, current time and memory data will be preserved.
Don't use reset function while the product is playing. It may cause severe
damage to its memory.
Getting Started
06
1. Open the cover on the bottom of the product.
2. Turn on your computer and connect the product to your computer.
The internal battery will charge automatically.
Charging the Battery Using Your Computer
Replay Time
- Continuous Book Replay Time: Max. 11,000 page view
- Continuous Music Replay Time: Max. 30 hours (based on MP3 128 Kbps,
44.1 KHz, Volume 10, EQ Normal).
Once recharging is completed, the Recharge LED will turn off.
Do not use cables other than the USB cable provided. It may cause malfunction.
Check if the product is connected to a high-power USB 2.0 port. Some
low-power USB ports built into certain peripheral devices, such as some types
of keyboards and USB hubs without internal power may not provide enough
power to charge. While your computer is switched to standby mode, the
product may not be charged.
Turn the product off or switch to Standby mode when charging. If charged
when the power is on, charging may take longer.
Charge and store the product only at room temperature. The product may not be
charged in extremely hot or cold place. The rechargeable battery is a consumable.
The available usage time of charged battery becomes short over time.
The battery will be fully charged within about 5 hours.
(Based on fully discharged, power OFF)
The charging time might be extended if you use the product while charging.
If the battery is completely discharged and has not been used for a long time,
power will not come on again until it has been charged for at least ten minutes.
In case where you recharge the batteries using the adapter, we do not provide
warranties for adapters other than those sold by iriver.
Charging the Battery
Getting Started
07
1. Open the cover on the bottom of the product.
2. If you connect the USB adapter to the device and power plug,
the internal battery will charge automatically.
Charging the Battery Using the USB Adapter
USB adapter can be purchased separately.
1. Open the cover on the bottom of the product.
2. Turn on the power of the device and computer.
3. If you connect the device to your computer, you will see the screen
where you can select connection mode.
- Portable Disk Connection: The connection between the product
and the computer is established and you can start transferring data.
- Battery Recharge: The recharge of the product will begin.
Connecting with the Computer
Connecting the Product
Getting Started
08
1. After selecting files/folders to copy from your computer, the selected
file/folder will be copied if you drag and drop it to the added drive.
2. Files (or folders) will be transferred to folders below according to
their content type.
- E-Book: book - Comic Book: comic - Music: music
Copying Files (Folders) to the Product
1. Safely disconnect the product from your computer by clicking the
icon on the taskbar of the computer screen.
2. Confirm the device disconnection by clicking [Confirm].
Depending on the operating system for example Windows XP, the icon may be
hidden from the taskbar. Hidden icons can be displayed by clicking indicator.
Safe disconnection may not be performed if application programs such as
Windows Explorer or Windows Media Player Windows are being used.
Make sure that the product is safely disconnected after all the active
application programs are closed. If safe disconnection fails, try again later.
Failure to safely disconnect may cause data loss.
Disconnecting from your computer
Do not use cables other than the USB cable provided. It may cause malfunction.
For successful connection between your computer and the USB cable, make
sure that all the functions are disabled before connection.
Check if the product is connected to a high-power USB 2.0 port. If connected
to a keyboard or a USB hub without a power supply of its own, connection with
the computer may not be troublefree.
Getting Started
09
1.
Select the files/folders to be deleted, right-click on them and select [Delete].
2. Click [Yes] if the [Confirm File/Folder Deletion] window pops up,
and the selected files/folders will be deleted.
Deleting Files (Folders) from the Product
Please connect the USB cable in the proper manner. If the power of the
computer or product is turned off or the USB cable is disconnected while
copying or moving files/folders, it may cause serious damage to the memory.
Transfer rate may differ depending on the computer or OS environment
available for your region.
Getting Started
10
Brand: SanDisk, Transcend
Recommended SD cards
Insert/remove the SD card while the power is off.
Do not force the SD card. It may cause malfunction and damage to the SD card.
Do not detach the SD card when in use. It may delete data, cause malfunction,
or damage the SD card.
Please do not repeatedly insert/remove the SD card.
If the SD card is not positioned properly, the product may malfunction or the
card may get stuck. If SD cards other than the recommended ones are used, it
may cause malfunction.
The transfer rate of the SD card may differ according to the computer status.
SD cards cannot be formatted using the product. Please format after connecting
the card reader or the product to the computer through UMS.
When formatting a SD card, all the data are deleted. Make sure that the data is
backed up before formatting.
1. Open the cover on the bottom of the product.
2. Turn the power off, place the SD card (see the figure below) in the
SD card slot, and press it in gently.
3. Press it in once more and the card can be removed.
Inserting/removing the SD card
Getting Started
Inhaltsverzeichnis
Andere IRiver E-Book-Reader Handbücher
Beliebte E-Book-Reader Handbücher anderer Marken
Denver
Denver EBO-500 Bedienungsanleitung
Orbit Research
Orbit Research Reader 20 Bedienungsanleitung
Amazon
Amazon Kindle Kindle 1 Bedienungsanleitung
Franklin
Franklin DFC-3015 Bedienungsanleitung
IEI Technology
IEI Technology AFL2-EM-RFID-KIT Bedienungsanleitung
Pocketbook
Pocketbook РВ 903 Bedienungsanleitung
