Iseg ECH 238 1200W Bedienungsanleitung

Spezialelektronik GmbH

iseg Spezialelektronik GmbH Email: sal[email protected] Phone ++ 49 (0)351 / 26 996 - 0

Bautzner Landstr. 23 http://www.iseg-hv.com Fax ++ 49 (0)351 / 26 996 - 21

D - 01454 Radeberg / Rossendorf Germany

Crate with Power Supply

ECH 238_1200W

ECH 238_1200W-UPS

Operator’s Manual

Contents

1. General information

2. Technical Data

3. Connections, pin assignments

3.1. Module station

3.2. External CAN-Bus

4. Front panel / Operation

Attention!

-It is not allowed to use the unit if the covers have been removed.

-We decline all responsibility for damages and injuries caused by an improper use of the module. It is highly

recommended to read the manual before any kind of operation.

Note

The information in this manual is subject to change without notice. We take no responsibility for any error in the

document. We reserve the right to make changes in the product design without notification to the users.

Filename ECH238_1200W as of 2011-07-04

Via Acquanera, 29 22100 Como

tel. 031.526.566 (r.a.) fax 031.507.984

info@calpower.it www.calpower.it

Spezialelektronik GmbH

iseg Spezialelektronik GmbH Email: sal[email protected] Phone++ 49 (0)351 / 26 996 - 0

Bautzner Landstr. 23 http://www.iseg-hv.com Fax ++ 49 (0)351 / 26 996 - 21

D - 01454 Radeberg / Rossendorf Germany 2

1. General information

The crate ECH 238_1200W is able to carry up to 8 Multi Channel HV-modules of the series EHS, EDS or EBS .

The crate provides the necessary supply voltages and connections for remote control via CAN-interface.

Option -UPS: - Integrated UPS (bridge time at least 1 min)

Sufficient air flow must be ensured during the operation of the unit.

2. Technical data

ECH 238 M

AC supply voltage 110 .. 240 V / max.12 A ( fuses double sided)

DC supply voltages + 24 V ( up to 50 A)

+ 5 V ( up to 5 A)

Total Power max. 1200 W

Floating max. difference of voltage between PE and internal GND: ∆V ≤⏐30 V⏐,

clamped via antiparallel suppressor-diode with VZ= 56 V

Mechanical layout 19“ – Standard BIN 6 U / ca. 450 mm depth

Module slot depth 220 mm

CAN-connectors: RJ45

Weight 10 kg

Operating Temperature 0°C … 40°C

Storage Temperature -20°C … 50°C

Air cooling

In case of desk operation, rack mounting or the use of several crates in a stack

forced air cooling must be provided.

Please use our 1U fan-unit for rack mounting, supplemented with

mountable feet for desk operation.

Spezialelektronik GmbH

iseg Spezialelektronik GmbH Email: sal[email protected] Phone++ 49 (0)351 / 26 996 - 0

Bautzner Landstr 23 http://www.iseg-hv.com Fax ++ 49 (0)351 / 26 996 - 21

D - 01454 Radeberg / Rossendorf Germany 3

3. PIN assignment

3.1. Module station

Connector Description Remarks

1 a b c + 5 V

3 a b c + 24 V

4 c ISL Connected to + 24 V with ca. 10 Ω/ 3 W

5 a b c GND

a CAN_GND

11 b CAN_L isolated

c CAN_H

13 a RESET

b OFF with ramp (e.g. 10s after power fail)

Connector Description Remarks

a Bank_addr module address b24, bank switch on front p.

30 b Bank_addr module address b25, bank switch on front p.

a Mod_addr module address b22, hard-wired

31 b Bank_addr module address b23, bank switch on front p.

c GND

a Mod_addr module address b20, hard-wired

32 b Mod_addr module address b21, hard-wired

c GND

3.2. External CAN-Bus

The external CAN-Bus to control the iseg HV module (CAN-HV) and the crate with the built-in CAN crate

controller (CAN-CC) is connected through RJ45 connectors on the front panel.

The CAN-Bus standard requires a termination with 120 Ωbetween CAN_L and CAN_H on both ends. For the

crate side please use the delivered CAN terminations (iseg Art-nr.: 510245 and 580591).

It is possible to control the HV module and the crate controller via one CAN-Bus (e.g. by connecting “OUT” from

CAN-HV to “IN” from CAN-CC).

Input Output PIN Signal

1 CAN-H

RJ45 RJ45 2 CAN-L

3 CAN-GND

Spezialelektronik GmbH

iseg Spezialelektronik GmbH Email: sal[email protected] Phone++ 49 (0)351 / 26 996 - 0

Bautzner Landstr. 23 http://www.iseg-hv.com Fax ++ 49 (0)351 / 26 996 - 21

D - 01454 Radeberg / Rossendorf Germany 4

4. Front panel / Operation

2 • RJ45 CAN HV

HV module CAN-Bus (CAN-IN,

termination or CAN-OUT to more

CAN nodes)

2 • RJ45 CAN CC

Crate Controller CAN-Bus

(CAN-IN, termination or CAN-OUT to

more CAN nodes)

BANK-SELECT-switch

select bank with fixed Module

address

SAFETY LOOP 1:

IS(Internal SL current)

2-pin Lemo socket

one side connected to +

24 V with ca. 10 Ω/ 3 W,

other side connected to

module station (4c).

If the module safety loop

of the built-in

multichannel module with

option _SL is active then

an output voltage in any

channel of it is only

present if this safety loop

is closed!

STATUS LED (green/red)

green indicates:

POWER-ON (24V-DC O.K. ) and

no CAN error and

Option UPS: Battery on float charge

STDBY

AC-supply ON

remote control possible

POWER-ON

ON – OFF switch 24V-DC Supply

AC-Power

ECH x38

SL1

SL2

CAN

POWER

BANK

SELECT

STDBY

Made in EEC by

STATUS

POWER 120-230 V AC 50/60 Hz 12,5 A

CAN

SAFETY LOOP 2:

INHIBIT

2-pin Lemo socket for

external INHIBIT signal to

shut down the integrated

HV module with ramp.

LOW level on the right

pins or connecting to the

left pins: INHIBIT is active

HIGH level or open:

Output according setting

+5V

10k

SL 2

Via Acquanera, 29 22100 Como

tel. 031.526.566 (r.a.) fax 031.507.984

info@calpower.it www.calpower.it

Dieses Handbuch passt für folgende Modelle

Beliebte Stromversorgung Handbücher anderer Marken

Monacor

Monacor PS-12CCD Bedienungsanleitung

VOLTIMA

VOLTIMA MagicBox 15 Bedienungsanleitung

Miller

Miller Auto Deltaweld 452 Bedienungsanleitung

BCP

BCP PUOUBK Merkblatt

HC 2210 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 6032A Bedienungsanleitung

Puls

Puls CT5.241 Bedienungsanleitung

OCZ

OCZ ZX1250W Bedienungsanleitung

Agilent Technologies

Agilent Technologies 6631B Bedienungsanleitung

Power

Power XXL A Series Bedienungsanleitung

Renogy

Renogy PHOENIX 300 Bedienungsanleitung

HP 6200B Service-Handbuch

Epson

Epson Stylus Scan 2500 Betriebsanleitung

Pulsar

Pulsar GREEN POWER CCTV PoE POE044816 Bedienungsanleitung

Puls

Puls MiniLine ML50.100 Bedienungsanleitung

Puls

Puls AS-Interface SLA4.100 Bedienungsanleitung

Kenwood

Kenwood PS-60 Bedienungsanleitung

Elmdene

Elmdene G1380xN-y-s Series Bedienungsanleitung

iseg ECH 238 1200W Bedienungsanleitung

Beliebte Stromversorgung Handbücher anderer Marken