Istar IS-AC01 Bedienungsanleitung

IS-AC01

PROJECTION ALARM

CLOCK RADIO

90049PI

user guide

2 PROJECTION ALARM CLOCK RADIO - User Guide www.philex.com

Contents...........................................................................Page

Warnings ............................................................................................. 2

Features and Controls ....................................................................... 3

Box contents ....................................................................................... 4

Introduction ........................................................................................ 4

Powering your alarm clock radio ..................................................... 4

Setting the clock ................................................................................. 5

Listening to FM radio ......................................................................... 5

Alarm functions .................................................................................6-7

Adjusting display and projector ........................................................ 7

Charging an external device.............................................................. 7

Specications ...................................................................................... 8

Warnings and advice

1. This product contains a Lithium coin cell battery keep the battery

away from children. The battery could be harmful if swallowed.

Seek immediate medical advice if you believe a battery has been

swallowed. Do not dispose of batteries in a re as this could

cause an explosion. The remote and battery must not be

disposed of with normal household waste. Take to a designated

recycling collection point for waste batteries and electronic

equipment.

2. The unit should not be exposed to direct sunlight, very high or

low temperatures, moisture, strong magnetic elds, high

frequencies and dusty environments.

3. Do not use abrasives, benzene, thinner or other solvents to clean

the surface of the unit. To clean, wipe with a clean soft cloth it

and a mild detergent solution.

4. Never attempt to insert wires, pins or other such objects into the

vents or openings of the unit.

Make sure the vents are not covered with newspaper, table-cloths,

curtains or similar items. Leave a distance of 5 cm around the

unit to allow for adequate ventilation.

Do not disassemble or modify the

unit

, there are no user

serviceable parts.

6. If the unit is damaged or malfunctions do not use. Consult

a qualied service engineer.

Disposal of your old appliance:

All electrical and electronic products containing Lithium

batteries should be disposed of separately from

household waste at an appropriate recycling point/centre.

For more detailed information about disposal of your old appliance,

please contact your local authority.

www.philex.com PROJECTION ALARM CLOCK RADIO - User Guide 3

1. Projector FOCUS dial

2. Projector lens

3. SNOOZE button/SLEEP

button/DIMMER button

4. Display

5. Alarm 1 indicator (alarm)

6. Alarm 1 indicator (radio)

7. Alarm 2 indicator (alarm)

8. Alarm 2 indicator (radio)

9. PROJECTOR ON/OFF button/

180° FLIP button

10.MEM/M+ button/SET button/

DATE button

11. < BACKWARDS button

12. > FORWARD button

13. ALARM 1 button/

VOL DOWN button

14. ALARM 2 button/

VOL UP button

15. POWER button/

ALARM OFF button

16. Speaker

17. USB charging port

18. Antenna

19. Battery compartment

20. DC IN socket

Features and controls

DC 5V 1.2A

21 3

18 19

109 11 1312 14 15

4 PROJECTION ALARM CLOCK RADIO - User Guide www.philex.com

Box Contents

1x Projection alarm clock

1x 5VDC Power adaptor

1x User guide

Introduction

Your IS-AC01 Projection Alarm Clock Radio projects the time in red

digits onto the ceiling allowing you to see the time at a glance.

Features & Benets

· 1.2” LED display with dimmer

· 180° image rotation projection with focus adjustment

· FM radio with preset radio station

· Dual alarm wake up by radio/beep

· Snooze/sleep function

· USB charging port

Powering your alarm clock radio

Plug the power adaptor into a mains socket and connect the DC

jack plug to the DC power socket (20) on the back of the unit.

Switch the mains socket power on, the LED screen will light up and

the radio will enter standby mode

• The radio is also equipped with a backup system powered by a

3V lithium CR2032 coin cell (not supplied). If the power is

interupted, the radio automatically switches to the battery power

supply which powers the clock and ensures the timer settings are

not lost. The battery compartment (19) is located on the

underside of the IS-AC01.

1. Use a Phillips screwdriver to remove the screw holding the

compartment door closed and remove the door.

2. Insert the battery into the compartment making sure the positive

and negative (+ or -) sides of the battery are in contact with the

corresponding terminals in the battery compartment.

3. Ret the battery compartment door and replace the screw

Please Note: When replacing the battery, leave the power adaptor

connected. Otherwise, all clock and alarm settings will be lost

Setting the clock

1. In standby mode, press and hold the SET button (10) to enter

the clock setting mode.

2. Press the SET button (10) repeatedly to cycle through the

setting options: Year > Month/Day > Time

3 Setting the year: Press the BACKWARD button <(11) or

FORWARD

> (12) button to change the year.

www.philex.com PROJECTION ALARM CLOCK RADIO - User Guide 5

4 Setting month/day: Press the BACKWARD button <(11) to set the

month and FORWARD button > (12) to set the day.

5 Setting the time: Press the BACKWARD <(11) to set the hour and

FORWARD button > (12) to set the minute.

6 Press the SET button (10) to conrm each setting option.

Listening to the FM radio

Before switching on the radio make sure the antenna (18) is unrolled

and fully extended.

1. Press the POWER button (15) to turn on the radio.

2. Press the BACKWARD <(11) or FORWARD button > (12) to adjust

the frequency.

3. Press and hold the BACKWARD <(11) or FORWARD button > (12)

to automatically tune to the next available FM station.

4. Press the Volume + button (14) to increase the volume, press

the Volume - button (13) to reduce the volume.

5. Press the POWER button (15) to turn o the radio.

Setting preset stations

You can store up to 10 preset stations.

1. First tune to a station.

2. Press and hold the MEM/M+ button (10) until “P01” (or the next

available preset slot) shows on the display.

3. Press the BACKWARD <(11) or FORWARD button > (12) to select

a preset number (P01-P10).

4. Press the MEM/M+ button (10) button to conrm. The preset

station has been set up.

5. Press the MEM/M+ button (10) repeatedly while listening to

the radio to select a preset station. Alternatively, press the MEM/

M+ button (10) once and then press the BACKWARD <(11) or

FORWARD button > (12) to select a preset station.

Using the alarm function

Setting alarms

You can have two alarms set at any one time. To set the alarms:

1. In standby mode, press and hold the ALARM 1 (13) or ALARM

2 (14) button to enter the alarm setting mode.

2. Then press the ALARM 1 (13) or ALARM 2 (14) button

repeatedly to cycle through the setting options:

Alarm time > Alarm sound source > Alarm frequency

6 PROJECTION ALARM CLOCK RADIO - User Guide www.philex.com

3. To set alarm time: Press the BACKWARD <(11) to set the hour

and FORWARD button > (12) to set the minute. Then press the

relevant Alarm button (12) or (13) to conrm the time and to go

to sound source setting.

4. To set the alarm sound source: Press the BACKWARD <(11) or

FORWARD button > (12) to select the alarm or radio as the

alarm sound source. A red LED indicator will appear beside the

corresponding symbol alarm (5 or 7) or radio (6 or 8) to show

your selection (it will appear on the left side of the screen for

Alarm 1 and on the right side for Alarm 2) . Then press the

relevant Alarm button (12) or (13) to conrm the time and to go

to the alarm frequency setting.

5. To set alarm frequency: Press the BACKWARD <(11) or

FORWARD button > (12) to select the alarm frequency:

1-1 = on a selected day only*, 1-5 = Monday to Friday,

1-7 = Everyday, 6-7 = Weekend only

*Press the relevant Alarm button (12) or (13) when this option is

selected. Then press BACKWARD <(11) or FORWARD button > (12)

to select a specic day for the alarm activation (e.g. 1= Monday,

2= Tuesday).

Once an alarm is set, the alarm will activate automatically with the

the sound as indicated, alarm or radio, as indicated on the left side

of the clock screen for Alarm 1 and on the right side for Alarm 2.

Turning the alarms on or o

When the clock time is displayed, press the (13) or ALARM 2

(14) button to enable or disable the respective alarm. The Alarm 1

or Alarm 2 indicator (alarm or radio) will switch on when the alarm

is enabled.

Switching o a sounding alarm

• Press AL OFF button (15) to switch o a sounding alarm.

• When the alarm sounds, the corresponding Alarm 1 or Alarm 2

indicator, alarm or radio , will ash on the clock screen.

Snooze function

To temporarily silence a sounding alarm, press the SNOOZE

button (3). The alarm will sound again when the snooze period of

9 minutes is over.

The corresponding Alarm 1 or Alarm 2 indicator, alarm or radio ,

will ash on the display during the snooze period.

To cancel the snooze period and the alarm, press the ALARM OFF

button (15).

www.philex.com PROJECTION ALARM CLOCK RADIO - User Guide 7

Sleep function

The sleep function allows you to set a time delay in minutes after

which period the radio will switch o automatically.

1. With the radio playing, press the SLEEP button (3) repeatedly to

select a sleep period (Options: O, 10,20,30,40,50,60,70,80,

90,100,110 and 120 minutes).

The radio will automatically switch o when the sleep period is over.

3. Press the SLEEP button (3) to display the remaining time before

the radio is due to switch o.

4. Press the POWER button (15) to cancel this function.

Display information

In standby mode, short press the SET button (10) to display the

day of the week, (d1 corresponds to Monday, d2 = Tuesday,

d3 = Wednesday, d4 = Thursday, d5 = Friday, d6 = Saturday and d7

= Sunday), press again for year, again for month and date and again

for time.

• In radio mode, press the BACKWARD <(11) or FORWARD button

> (12) once to briey change the display from the clock time to the

current radio frequency playing.

Projector

1. Press the button (9) to project the time onto a nearby

wall or the ceiling of your bedroom.

2. Press and hold the FLIP button

(9)

to ip the projected image.

3. Turn the FOCUS dial

(1)

to adjust the image sharpness.

Please Note: The projector is designed for use in dark rooms only

and will not be visible if there are any lights on.

Charging an external device

Connect an external device (e.g. smartphone, tablet or camera etc.)

via a USB cable (not supplied) to the USB port (17) for charging.

The USB port is for charging only and is not suitable for exchange

of data.

Display brightness

In standby mode, press the DIMMER button to change the

brightness level of the clock display options are low / high or o.

This seeting will not aect the brightness of the projector beam.

The low setting is the default (energy saving) setting.

8 PROJECTION ALARM CLOCK RADIO - User Guide www.philex.com

Waste electrical and electronic products should not be disposed

of with household waste. Please recycle where facilities exist.

Check with your Local Authority for recycling advice.

London Road, Bedford, MK42 0NX UK. 2019 V1.3

Specications

Power Adaptor Input 100-240~50/60Hz

Power Adaptor Output 5.0V𝌂1.2A

Backup Battery Lithium 3V CR2032 coin cell

Audio Output 200mW RMS

FM Presets 10x

FM Frequency Range 87.5 – 108 MHz

Dimensions: 158 x 85 x 80mm (L x H x D)

Power Supply: ErP/EuP directive No. (EU) 2019 (1782)

Manufacturer

Trademark

Address

Philex Electronic Ltd. London Road,

Bedford, MK42 0NX, UK.

Registration No. 339123

Model identier OBL-0501200E / OBL-0501200B

Input AC frequency 50/60Hz

Input voltage 100-240VAC

Output voltage 5.0VDC

Output current 1.2A

Output power 6.0W

Average active eciency 79.97%

Eciency at low load (10 %) N/A

No-load power consumption 0.053W

Technical Support

For further advice please visit our technical website at

http://www.philex.com/products/technical-support

Declaration of Conformity

Hereby, Philex Electronic Ltd. declares that the radio equipment:

models 90049PI & 90042PI i-Star Projection Alarm Clock Radio for

radio broadcast reception in domestic premises are in compliance

with the Radio Equipment Directive 2014/53/EU. The full text of the

EU declaration of conformity is available at the following internet

address: www.philex.com/doc

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Istar Wecker Handbücher

Istar

Istar 90040PI Bedienungsanleitung

Beliebte Wecker Handbücher anderer Marken

Steren

Steren CLK-210 Bedienungsanleitung

COP-USA

COP-USA ALCDVR32-SL Bedienungsanleitung

Philips

Philips HF3505/70 Technisches Handbuch

Casio

Casio PQ-70 Bedienungsanleitung

iHome

iHome IA63 Bedienungsanleitung

Coopers

Coopers 9765 Bedienungsanleitung

ANJANK

ANJANK AC-190 Leitfaden

TFA

TFA 98.1075 Bedienungsanleitung

Sharper Image

Sharper Image 204050 Bedienungsanleitung

Lumie

Lumie Zest Bedienungsanleitung

Dexford

Dexford RCT200 Bedienungsanleitung

Philips

Philips AJL303/37B Bedienungsanleitung

RST

RST Q754 Bedienungsanleitung

iHome

iHome iKT50 Bedienungsanleitung

Sony

Sony dash HID-B7 Bedienungsanleitung

SVINZ

SVINZ SCC009 Bedienungsanleitung

Clas Ohlson

Clas Ohlson 918863 Bedienungsanleitung

IKEA

IKEA FNURRA Bedienungsanleitung