II. INSTRUCTIONS FOR USE
Before switching on the appliance, carefully read this
instructions manual which contains important information
about correct and optimum use of the appliance. For further
information about the
performance
characteristics and
washing
machine consult your local dealer.
the performance of a wash and rinse the
parts of the line product is going to be mounted by a
will ensure that there is no decrease in
.
(at least once a year) should be
device. For this purpose, we recommend a service
with the competent service.
maximum water hardness 12°F and 1000mS /cm (25
conductivity value. Fail to comply with these values on a
may occur breakdowns when using tap water
. These
kind of breakdowns
are not covered by the guarantee.
Consult your authorised water supplier to check your water
hardness. Use water softener
system in case of need.
will be placed into the plates using a basket
at intervals allowed by the appropriate area.
into the machine excessing interior
height of maximum 300 mm.
DESCRIPTION OF THE CONTROL PANEL
INTRODUCTION
familiarisation with the dishwashers
functions,
refer to the fold
-
out page at the end of this booklet,
illustrating the control panel.
The different functions available on the various models are
described below.
Some functions are common to all models while others are
only available on certa
in models.
CONTROL PANEL
Refer to figure at the end of booklet.)
- On-Off Button
- Power Lamp
- Heat Lamp
- Washing Lamp
- Rinsing Lamp
- Drainage Button (Optional)
- Washing Button
COMMISSIONING
(Please refer to the shape of the control panel
the booklet)
Information
Before opening the device
, make sure the device
ground line and power source. Water on / off, turn the
must open.
TURNING ON THE APPLIANCE
● Press on-off button "A". Power light “B”
Make sure the machine's door is closed. The machine
begin the process of obtaining water. At the end of t
obtaining process automatically, the water heating process
start. Once the heating process is complete, the heat lamp "
will be lit. This is
the point when the dishwasher is ready for
the loading. In this case, open the machine’s door. Then
the soiled dishes into the basket to be washed. After, m
the basket into the machine and close the machine’s door.
begin the process of washing, press the washing button "G
The machine will begin the process of washing.
process, "D" washing indicator light will illuminate to
washing process continues. When the light turns off,
is finished. But afterwards, the machine waits for
and rinsing process will be activated for 15-20 seconds
rinsing indicator light "E" illuminates.
completed, the rinsing indicator light will be turned off. O
the machine’s door and remove the basket with clean dishes
● Try to put the dishes into the machine free of rough
This will significantly affect washing performance.
● At the very first washing cycle, using the machine
water temperature is not heated enough will create
situation. Cleaning chemicals will action with unheated
in the machine which will create a foamy water.
Therefore,
make sure that the heating indicator lamp lit before starting
the washing process.
●The built-in automatic rinse aid dosing pump (optional)
the built-in automatic detergent dosing pump (optional)
place through the process itself.
Make sure that the button on
the pumps are switched on. Plunge the mouths
hoses directly into the detergent and rinse aid liquid box
Always use high quality detergent and
reach perfect washing results.
You can get more information
on this significant subject from the authorized dealer
technical service.
● The machine also can do detergent and rinse aid
process with an external pump. For the connection
detergent or rinse aid dosing pumps and their
connectors subsequently, you will see the indicating marks
the machine.
