ITaste MVP3.0 Bedienungsanleitung

USER MANUAL

USER M ANUAL

iTaste MVP3.0 说明书尺寸：65*104mm 封面材质：157g 双铜板纸单面过哑胶内页材质：128g 双铜纸双面印刷装订方式：胶装

Congratulaons on your purchase of this Innokin iTaste MVP3.0 Advanced Personal Vaporizer.

For the best possible vaping experience please carefully read, and follow this user manual.

The iTaste MVP3.0 is the newest in the line of internaonally bestselling iTaste MVP

vaporizers. The iTaste MVP3.0 features a greater range of Variable Voltage, Variable Waage,

advanced safety features, portable electronics charging capacity and also ‘Vape while

charging’ Technology.

The iTaste MVP3.0 has a ﬂush 510 connecon with a spring loaded posive pin, durable

stainless steel threading, an included ego adaptor and a replaceable integrated micro-USB

charging cable.

The iTaste MVP3.0 has a variable voltage range of 3.0 – 9.0 volts adjustable in .1 volt

increments and a variable waage range of 6.0 – 30.0 Was, adjustable in .5 was increments.

WARNING:

The iTaste MVP3.0 uses Vrms DC current and is very accurate with a power deviaon of 0.1

Wa. The full 30 Was is precisely maintained between resistances of 0.4 to 2.5 ohms. There

is no wasted power and exact accuracy means you are always vaping the power level that you

choose. Vrms provides superior precision in delivering the exact waage Ohm’s Law requires

and stable power means beer vapor.

Please check and verify that your iTaste MVP3.0 is an authenc Innokin Technology product.

To verify that this iTaste MVP3.0 is a real Innokin Technology device please:

1) Find the label on the reverse of the packaging and scratch the silver stripe to reveal your

iTaste MVP3.0 Unique Authorizaon number.

2) Visit the Oﬃcial Innokin Technology website at www.innokin.com

3) Enter the Unique Authencaon number in the Authencaon ﬁeld.

4) Verify your iTaste MVP3.0 is authenc.

If you have any quesons or suggesons we would like to invite you to please write to us at

[email protected].

Join our Innokin FaceBook Page: www.facebook.com/Innokin.Technology for the latest

informaon, contests, giveaways and be part of a great and growing community!

Please read this secon carefully to ensure you receive maximum beneﬁts from your iTaste

MVP3.0 and enjoy vaping with it in the most safe and eﬀecve ways possible.

1. This Advanced Personal Vaporizer may be used with e-liquids that contain nicone. If

quesons or concerns regarding your e-liquid arise, please check with your e-liquid

provider. This product is only intended for use by adults of legal smoking age (18+) and

should not be used by children, women who are pregnant or breaseeding, or persons with

or at risk of heart disease, high blood pressure, diabetes or taking medicine for depression

or asthma, or who otherwise may be sensive to nicone. Nicone is addicve and habit

forming, and can be toxic by inhalaon, in contact with the skin or eyes, or if swallowed.

Ingeson of the non-vaporized concentrated e-liquid ingredients can be poisonous. Keep

away from children and pets.

2. This Advanced Personal Vaporizer may be used with e-liquids that contain nicone, a

chemical known to the State of California to cause birth defects or other reproducve harm.

Please check with your e-liquid provider. (For products sold in California.)

3. This Advanced Personal Vaporizer is only designed to be used with high quality e-liquid.

Please check with your e-liquid provider. This device is not intended for use with loose

tobacco leaf or herbal substances.

4. This Advanced

Personal Vaporizer has not been evaluated by the Food and Drug Administraon

and is not intended to treat, migate, prevent or cure any disease or condion. This product

is not intended for use as a smoking cessaon device.

5. The clearomizer must be stored out of the reach of children and pets. All empty clearomizers

must also be disposed of properly and out the reach of children and pets.

6. This iTaste MVP3.0 Advanced Personal Vaporizer includes small parts such as the mouth

piece. Always keep any small parts out of reach of children and pets to prevent swallowing

or other harm.

7. Do not misuse, mishandle or store your iTaste MVP3.0 Advanced Personal Vaporizer

improperly. Even though it is made of high quality stainless steel it may become damaged

when dropped or otherwise mishandled.

8. Do not aempt to repair the unit by yourself as damage or personal injury may occur.

9. In order to guarantee the normal funconing of your iTaste MVP3.0 Advanced Personal

Vaporizer, and maximize vaping pleasure, we strongly advise that you charge the baery

when the power level drops below 10 percent.

10. In order to prolong the operaon of your iTaste MVP3.0 Advanced Personal Vaporizer,

please do not place or store this iTaste MVP3.0 Advanced Personal Vaporizer in excessively

hot or cold environments.

11. Obey local laws or regulaons regarding Electronic Cigarees when vaping. If you are in an

area where there are any bans or potenal dangers, please do not use your iTaste MVP3.0

Advanced Personal Vaporizer.

12. Your iTaste MVP3.0 Advanced Personal Vaporizer is not waterproof. Keep it dry at all mes.

13. Do not allow any liquids or ejuice to enter the device through the top threading or the USB

ports. If any liquids enter the device, or come into contact with the PCB, please disconnue

using or charging the device and contact your local Authorized Innokin Vendor immediately.

14. Keep your iTaste MVP3.0 Advanced Personal Vaporizer away from sources of excessive

heat as damages may occur.

15. Do not drop, throw, or mishandle your iTaste MVP3.0 Advanced Personal Vaporizer as the

outer shell or inner components may become damaged.

16. Innokin Technology is not responsible for baery and charger explosions, or malfuncons,

due to the use of a low-quality charger. Only use the original iTaste MVP3.0 Advanced

Personal Vaporizer starter kit charger to charge your iTaste MVP3.0, We strongly

recommend that you always use a high quality 5V 500mA USB wall charger (CE/UL

Cerﬁed). The iTaste MVP3.0 is not designed for use with a car charger, The iTaste MVP3.0

does not come included with a car charger.

17. Innokin Technology is not responsible for any clearomizer or baery damage due to the use

of low quality eLiquid or dry herb.

1 Connector

2 Firing, POWER ON,

POWER OFF buon

3 OELD Display Screen

4 “+” buon: MVP3.0 /VW+

“-” buon: MVP3.0 /VW-

5 Micro USB cable plug port

6 Baery level Indicator

The Primary Features of The iTaste MVP3.0

Baery Level Indicator:

The iTaste MVP3.0 baery has a tri-color LED on the top.

Green = Almost fully Charged. When the iTaste MVP3.0 is fully recharged the LED light will

power oﬀ.

Yellow = Half Power.

Red = Low Power. Charge the iTaste MVP3.0.

Variable Voltage:

Voltage can be adjusted from 3.0 – 9.0 volts in .1 volt increments.

Variable Waage:

Waage can be adjusted from 6.0 – 30.0 Was in .5 was increments.

2 . 5Ω

0.0W V

4.0

2 . 5Ω

0.0W V

Short Circuit/Atomizer Protecon:

Short Circuit/Atomizer Protecon protects the iTaste MVP3.0 Advanced Personal Vaporizer

against shorted atomizers and will stop the unit from funconing in unsafe condions.

The iTaste MVP3.0 features automac real-me atomizer Ohms detecon. If the resistance of

the atomizer is lower than 0.4, the Ohms bar will blink and the iTaste MVP3.0 will not power

on.

If there is a short circuit the iTaste MVP3.0 screen will display:

The LED light will power oﬀ. If there is a short circuit the MVP3.0 will not power on.

Over-Discharge Protecon:

The iTaste MVP3.0 Advanced Personal Vaporizer monitors the baery voltage and will

automacally power oﬀ when the baery over discharged.

0. 2Ω

0.0W V

4.0

0. 0Ω

0.0W V

4.0

ON/OFF baery switch:

Press the power buon“ ”three mes to turn on the iTaste MVP3.0. Once the iTaste MVP3.0

is on, hold down the power buon to acvate the atomizer. When the iTaste MVP3.0 is not in

use, press the power buon “ ” three mes in succession to power oﬀ the iTaste MVP3.0.

Always power oﬀ the iTaste MVP3.0 when it is not being used, or when it is going to be stored

in a pocket, bag or purse.

SAFETY:

15 second cutoﬀ:

If the “ ” buon is held for 15 seconds or longer the iTaste MVP3.0 Advanced Personal

Vaporizer will stop ﬁring unl the “ ” buon is released and pressed again.

Low Voltage Warning

The Red LED and Baery bar will connue blinking when the baery capacity is lower than 3.3V and

the iTaste MVP3.0 Advanced Personal Vaporizer will automacally power oﬀ.

‘Vape while charging’ Technology

The iTaste MVP3.0 is recharged with a Micro USB cable. When plugged into a power source the

iTaste MVP3.0 can also be vaped and charged at the same me with Innokin Technology’s

‘Vape while you charge’ pass-through technology.

Remembers last Voltage or Waage seng:

When the iTaste MVP3.0 is turned oﬀ it will remember the current voltage or waage seng

and it will retain the seng when the iTaste MVP3.0 is powered on.

Portable power source for electronic products

To charge your portable electronic device with the iTaste MVP3.0 plug the built-in Micro USB

cable into the electronic device and power on the iTaste MVP3.0. The included iTaste MVP3.0

starter kit charging cable can also be used. Plug the larger USB port into the iTaste MVP3.0 and

the Micro-USB into the electronic device and power on the iTaste MVP3.0. You may only

charge one electronic device at a me. Do not aempt to charge more than one device at the

same me or you may damage the device.

High compability 510 connector:

The iTaste MVP3.0 510 threading is compable all standard 510 clearomizers & atomizers

including the iClear16, iClear16B, iClear16D, iClear30, iClear30B, iClear30S and the Gladius-X.

Ego Threading Adapter

Aach the provided EGO Thread adapter to the ﬂush 510 connector to vape with ego style

compable tanks.

The iTaste MVP3.0 has three buons: “ ” buon, "+" buon and "-" buon.

“ ” buon: Power

“+” buon: MVP3.0 / VW+

“-” buon: MVP3.0 / VW- 11

OPERATION GUIDE

All iTaste MVP3.0 sengs can be easily changed without the use of a menu system. The large

OLED screen readily displays all important informaon.

To POWER ON the iTaste MVP3.0:

Press the buon “ ” three mes to power on the iTaste MVP3.0.

The LED light on the top will blink once to display the current baery charge. When the

buon “ ” is pressed (with a clearomizer aached) the OLED screen will display the aached

atomizer resistance, voltage and waage and remaining baery charge.

To POWER OFF the iTaste MVP3.0:

Ohms Meter & Baery Level Indicator & Puﬀ Counter:

With an atomizer aached, hold both the “+” and “-” buons simultaneously and the screen

will display: the resistance of the aached atomizer, the baery voltage, the number of puﬀs

since the device was last turned oﬀ and the last set voltage or waage.

Enter Variable Waage Mode:

Press and hold the “+” buon and then the “ ” buon for 1 second to enter variable waage

mode.

Adjust Variable Waage:

When the iTaste MVP3.0 is in variable waage mode press the “+” or “-” buon one me and

then press it again to decrease the waage. Hold the buon down to quickly increase or

decrease the set waage.

The iTaste MVP3.0 waage can be adjusted from 6.0 to 30 was in .5 wa increments by

pressing the “+” or “-” buons. If the waage is decreased below 6 Was it will cycle up to 30

Was. If the waage is increased from 30Was it will cycle down to 6 was. Press the

buon “ ” to lock the set waage and ﬁre the iTaste MVP3.0.

2.5Ω

3.7V 10

2 . 5Ω

0.0W

10.0W

2 . 5Ω

0.0W

Enter Variable Voltage Mode:

Press and hold the “-” buon and then the “ ” buon for 1 second to enter variable voltage

mode.

In variable voltage mode the iTaste MVP3.0 voltage can be adjusted from 3.0 to 9.0 volts in .1

volt increments by pressing the “+” or “-” buons.

Adjust Variable Voltage:

When the iTaste MVP3.0 is in variable voltage mode press the “+” or “-” buon one me and

then press it again to decrease the voltage. Hold the buon down to quickly increase or

decrease the set voltage.

The iTaste MVP3.0 voltage can be adjusted from 3.0 to 9.0 volts in .1 volts increments by

pressing the “+” or “-” buons. If the voltage is decreased below 3 volts it will cycle up to 9

Volts. If the voltage is increased from 9 Volts it will cycle down to 3 volts. Press the buon“ ”

to lock the set voltage and ﬁre the iTaste MVP3.0.

Important: Explaining Low-Resistance / High Waage Vaping

To ensure you have the best possible vaping experience it is important to have a basic

understanding of waage, voltage and coil resistance. There is a range of standard coil

resistances: 2.1, 1.7, 1.4, 1.1, 0.8, 0.5 ohm etc and Rebuildable Atomizers or Drippers

(RBA/RDA) may even be lower. The iTaste MVP3.0 can ﬁre between resistances of 2.5 to .4

ohm and you can clearly see the resistance of the aached clearomizer on the OLED screen.

We would suggest that for coil resistances of 1.7 – 2.1ohm you can begin with a seng of

8Was and then increase the Waage unl you ﬁnd your perfect seng. For resistances of 0.5

you can try a seng of 25Was and increase the waage unl you ﬁnd your perfect vaping

seng.

We would suggest that for coil resistances of 1.7 – 2.1ohm you can begin with a seng of 4.0

Volts and then increase the Voltage unl you ﬁnd your perfect seng. For resistances of 0.5

you can try a seng of 5 Volts and increase the voltage unl you ﬁnd your perfect vaping

seng.

If you have any quesons please contact your local Authorized Innokin Vendor.

Important: The iTaste MVP3.0 will only ﬁre variable voltage OR variable waage depending on

the last seng chosen; it will not ﬁre both. You must choose either Variable Voltage or

Variable Waage.

2 . 5Ω

0.0W V

4.0

Charging the iTaste MVP3.0

You can rely on your iTaste MVP3.0. This iTaste MVP3.0 is built with the highest quality of

engineering and materials and is built to be your perfect daily vaping device. The iTaste

MVP3.0 is legendary for being a tough, dependable, long lasng vaporizer however life can be

rough and it may become damaged. This is true of any electronic devices and the iTaste

MVP3.0 seems to get dropped a lot more than most.

For maximum safety we strongly recommend:

Charge the device using the provided micro-USB cable. Do not use a low quality cable.

Do not use a car/truck usb adapter to charge the iTaste MVP3.0.

We strongly recommend that you are present when the device is being charged.

Do not leave it charging unaended.

PLEASE NOTE:

The Red LED will blink for eight seconds when baery capacity is lower than 3.3V and the iTaste

MVP3.0 will automacally power oﬀ.

When the iTaste MVP3.0 baery is fully charged the LED will power on and the device will power

oﬀ.

Inhaltsverzeichnis

Andere iTaste Elektronische Zigarette Handbücher

iTaste

iTaste SVD Bedienungsanleitung

Beliebte Elektronische Zigarette Handbücher anderer Marken

STEAMAX

STEAMAX TFV8 X-BABY Bedienungsanleitung

iQOS

iQOS 3 MULTI Bedienungsanleitung

Vaporesso

Vaporesso LUXE XR MAX Bedienungsanleitung

ZAZO

ZAZO PRO Mini 2 Bedienungsanleitung

Aquafog

Aquafog Turbo XE Handbuch

Electronic Cigarettes Australia Pty Ltd

Electronic Cigarettes Australia Pty Ltd AUSSIE BLUE ENDURANCE Bedienungsanleitung

UWELL

UWELL Whirl T1 Bedienungsanleitung

VooPoo

VooPoo VMATE Bedienungsanleitung

Yogs-Pfeifen

Yogs-Pfeifen E-PIPE nex KLASSIK Bedienungsanleitung

TSI Instruments

TSI Instruments 3075 Bedienungsanleitung

Vaporesso

Vaporesso GTX ONE Bedienungsanleitung

VooPoo

VooPoo DRAG 2 Bedienungsanleitung

Innova

Innova 3.0 Bedienungsanleitung

Aquafog

Aquafog XE CRSM Bedienungsanleitung

hi-Fun

hi-Fun hi-Cigarette Bedienungsanleitung

Neptronic

Neptronic SKH Series Bedienungsanleitung

Vaporesso

Vaporesso LUXE Q2 SE Bedienungsanleitung

iQOS

iQOS 3 DUO Bedienungsanleitung

iTaste MVP3.0 Bedienungsanleitung

Beliebte Elektronische Zigarette Handbücher anderer Marken