ITC T-6221 Bedienungsanleitung
T-6221
CD/MP3 PLAYER
OPERATION MANUAL
Please follow the instructions in this manual to obtain the optimum results from this unit.
We also recommend that you keep this manual handy for future reference.
PUBLIC ADDRESS SYSTEM
T-6221
CD/MP3 PLAYER
ON
OFF
POWER
OPEN/
CLOSE
CD/
USB
/SD
PLAY STOP NEXTPREVIOUS
USB
TABLE OF CONTENTS
1. SAFETY PRECAUTIONS .......................................................................................3
2. GENERAL DESCRIPTION ....................................................................................5
3. FEATURES ...............................................................................................................5
4. NOMENCLATURE AND FUNCTIONS
4.1 Front Panel .............................................................................................................6
4.2 Rear Panel............................................................................................................. 7
5. ....................................................................................... 7
6. CD .......................................................................................................8
7. APPLICATIONS ...................................................................................................... 9
8.SPECIFICATIONS .................................................................................................10
9.DIMENSIONAL DIAGRAM ................................................................................... 11
REMOTE CONTROLLER
OPERATION
2
3
Be sure to read the instructions in this section carefully before use.
Make sure to observe the instructions in this manual as the conventions of safety symbols and messages
regarded as very important precautions are included.
We also recommend you keep this instruction manual handy for future reference.
Safety Symbol and Message Conventions
Safety symbols and messages described below are used in this manual to prevent bodily injury and property
damage which could result from mishandling. Before operating your product, read this manual first and
understand the safety symbols and messages so you are thoroughly aware of the potential safety
Indicates a potentially hazardous situation which, if mishandled, could
result in death or serious personal injury.
Indicates a potentially hazardous situation which, if mishandled, could
result in moderate or minor personal injury, and/or property damage.
When Installing the Unit
Do not expose the unit to rain or an environment
where it may be splashed by water or other liquids,
as doing so may result in fire or electric shock.
Use the unit only with the voltage specified on the
unit. Using a voltage higher than that which is
specified may result in fire or electric shock.
Do not cut, kink, otherwise damage nor modify the
power supply cord. In addition, avoid using the
power cord in close proximity to heaters, and never
place heavy objects -- including the unit itself -- on
the power cord, as doing so may result in fire or
electric shock.
Be sure to replace the unit's terminal cover after
connection completion. Because high voltage is
applied to the speaker terminals, never touch these
terminals to avoid electric shock.
Be sure to ground to the safety ground (earth)
terminal to avoid electric shock. Never ground to a
gas pipe as a catastrophic disaster may result.
Avoid installing or mounting the unit in unstable
locations, such as on a rickety table or a slanted
surface. Doing so may result in the unit falling
down, causing personal injury and/or property
damage.
When the Unit is in Use
Should the following irregularity be found during
use, immediately switch off the power, disconnect
the power supply plug from the AC outlet and
contact your nearest dealer. Make no further
attempt to operate the unit in this condition as this
may cause fire or electric shock.
If you detect smoke or a strange smell coming
from the unit.
If water or any metallic object gets into the unit
If the unit falls, or the unit case breaks
If the power supply cord is damaged (exposure of
the core, disconnection, etc.)
If it is malfunctioning (no tone sounds.)
To prevent a fire or electric shock, never open nor
remove the unit case as there are high voltage
components inside the unit. Refer all servicing to
your nearest dealer.
ITC
ITC
Do not place cups, bowls, or other containers of
liquid or metallic objects on top of the unit. If they
accidentally spill into the unit, this may cause a fire
or electric shock.
Do not insert nor drop metallic objects or
flammable materials in the ventilation slots of the
unit's cover, as this may result in fire or electric
shock.
1. SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
4
An all-pole mains switch with a contact separation of at least 3 mm in each pole shall be incorporated in
the electrical installation of the building.
When Installing the Unit
Never plug in nor remove the power supply plug
with wet hands, as doing so may cause electric
shock.
When unplugging the power supply cord, be sure
to grasp the power supply plug; never pull on the
cord itself. Operating the unit with a damaged
power supply cord may cause a fire or electric
shock.
When moving the unit, be sure to remove its power
supply cord from the wall outlet. Moving the unit
with the power cord connected to the outlet may
cause damage to the power cord, resulting in fire or
electric shock. When removing the power cord, be
sure to hold its plug to pull.
Do not block the ventilation slots in the unit's cover.
Doing so may cause heat to build up inside the unit
and result in fire.
Avoid installing the unit in humid or dusty locations,
in locations exposed to the direct sunlight, near the
heaters, or in locations generating sooty smoke or
steam as doing otherwise may result in fire or
electric shock.
When the Unit is in Use
Do not place heavy objects on the unit as this may
cause it to fall or break which may result in
personal injury and/or property damage. In
addition, the object itself may fall off and cause
injury and/or damage.
Make sure that the volume control is set to
minimum position before power is switched on.
Loud noise produced at high volume when power is
switched on can impair hearing.
Do not operate the unit for an extended period of
time with the sound distorting. This is an indication
of a malfunction, which in turn can cause heat to
generate and result in a fire.
Contact your ITC dealer as to the cleaning. If dust
is allowed to accumulate in the unit over a long
period of time, a fire or damage to the unit may
result.
If dust accumulates on the power supply plug or in
the wall AC outlet, a fire may result. Clean it
periodically. In addition, insert the plug in the wall
outlet securely.
Switch off the power, and unplug the power supply
plug from the AC outlet for safety purposes when
cleaning or leaving the unit unused for 10 days or
more. Doing otherwise may cause a fire or electric
shock.
Due to product upgrades, while some of the features and specification in the user manual does not
match the actual functions, sorry for any inconvenience and thanks for your kind understanding!
5
The T-6221 is a public address amplifier switch with can provide an ideal public address solution from small
to big places such us mosques, schools, hotels and factories to train stadium and air stations.
1. T
Microcomputer control, touch keys;
3. High brightness VFD dynamic fluorescent display, clearly visible;
4.Imported digital movement, system + ESS decoding, super error correction;
5. Automatic playback controls;
6. Can play: CD/VCD/MP3/DVD disc;
7.1 Channel audio signal left and right channels (L / R) output.
he standard chassis design, 1U aluminum alloy panels, beautiful and practical;
2.
3. FEATURES
2. GENERAL DESCRIPTION
6
1. GIVE ON
2. USB interface
3. SD booth
5. OPEN/CLOSE
6. O
7. PLAY / PAUSE
8. STOP / RETURN
STOP / RETURN band search button (CD)
4. CD SCREEN
Display the working state of CD
perating mode selection button
10.NEXT
Next band search button (CD)
11.POWER SWITCH
On top of the opening Power
Press the end, power shut down
12.POWER
Power indicator
9. PREVIOUS
Previous band search button (CD)
4.1 FRONT PANEL
4. NOMENCLATURE AND FUNCTIONS
4569
1810
ON
OFF
POWER
OPEN/
CLOSE
CD/
USB
/SD
PLAY STOP NEXTPREVIOUS
USB
23711 12
15. MONITOR VOLUME
13. AC POWER INPUT
14. AUDIO OUTPUT
4.2 REAR PANEL
13 14
~230V 50Hz
30W
T1AL 250V AUDIO
OUTPUT
R
L
MON VOL
MIN MAX
15
CD/
USB/
SD
7
5.REMOTE CONTROLLER
2
3
4
5
6
8
1.
Play / Pause / confirm button
3. Stop / back button
4. Last
In / out positions
2.
5. Next
6. CD player operating mode selection button
7. SD/USB/SD audio input mode selection button
8. (0~9) number control
7
1
Notice:
1. Select the track number of more than two digits, only on the remote control keyboard enter the
required Numbers in a row;
2.CD playback mode selection button when using operation, when the screen shows to ALL play
for circulation mode, When the display shows for , Play to single cycle mode, No more than two
arbitrary display, no circulation mode, play the last song immediately stop playback, the display
shows broadcast ALL return for circulation mode;
3. Button when using switch in different patterns, the key time of no more than a second, a single
click, when key time more than a second time, is continuous press below two swappable play mode.
8
=CD OPERATING
1. Press "power" switch on power supply
2. Button function
6. CD OPERATION
3. Dish placements tray up
4. Press key "open/close" tray close start read
4; PLAY / PAUSE
<STOP / RETURN
9PREVIOUS
:NEXT
5. Play diskette
6. CD Diskette Play
1 Placement CD diskette read back enter
firstly catalog choice menus and play firstly
song use pervious and next key can elect
demand song.
2 Play course press key stop, menu backtrack
catalog choice menus Using previous and
next key choose demand song press key play
come into homologous catalog choice menus,
a new press key play, carry out like 1 of play
function.
9
7. APPLICATIONS
REAR PANEL CONNECTIONS
MIXER PRE-AMPLIFIER
~230V 50Hz
30W
T1AL 250V AUDIO
OUTPUT
R
L
MON VOL
MIN MAX
EMC 1EMC 2 EMCGAIN
INPUTS
MIC 4 MIC 3 MIC 2 MIC 1
MUTE
AUX 3 AUX 2 AUX 1
INPUTS OUTPUTS
MIC 4MIC 5 MIC3 MIC 2 MIC 1
LINE INPUTS
EMC 1EMC 2
EMC INPUTS
MIC 5EMC
PRIORITY
10
8.SPECIFICATIONS
MODEL T-6221
DIMENSION(mm)
WEIGHT
484X220X44
POWER CONSUMPTION
POWER REQUIREMENTS
3.6Kg
30W
FREQUENCY RESPONSE
20Hz~20KHz(-1.5dB)
~220-240V 50/60Hz
Inhaltsverzeichnis
Andere ITC MP3-Player Handbücher
Beliebte MP3-Player Handbücher anderer Marken
Blaupunkt
Blaupunkt Compact Drive MP3 Bedienungsanleitung
Memorex
Memorex MMP9008 - 8GB USB 2.0 Bedienungsanleitung
Meizu Electronic Technology
Meizu Electronic Technology E5 Bedienungsanleitung
Naxa
Naxa NMV-173NX Bedienungsanleitung
Philips
Philips PSA250 Bedienungsanleitung
Zipy
Zipy go! Waving Bedienungsanleitung
