ITI Simon 2 Bedienungsanleitung
Simon Version 2 Quick Guide
https://alpha.adt.com/help/38.html[11/8/2018 11:50:02 PM]
Simon Version 2 Quick Guide
For a detailed review of the entire system, please view the Simon Version 2 manual.
« Help Center
Arm &
Disarm the
System
Battery Bypass
Protected
Areas
Date &
Time
Settings
Chimes &
Beeps
Reset Security
Codes
Trouble
Conditions
Volume
Arm and Disarm
Arm:
To arm all sensors in STAY mode when you are not leaving the premises, press the [Doors &
Windows] button once.
To arm all sensors in AWAY mode when you are leaving the premises, press the [Doors &
Windows] and the [Arm Motion Sensors] buttons once.
Disarm:
Select
Simon Version 2 Quick Guide
https://alpha.adt.com/help/38.html[11/8/2018 11:50:02 PM]
To disarm, press the [Disarm] button once + your [security code].
For more information on this topic please visit the complete Simon Version 2 manual.
Battery
The Simon Version21 operates on the 7.2V Battery Pack.
Loss of AC power and use of backup battery power is indicated by No AC.
A low battery condition is indicated by Low Bat.
For instructions on replacing your battery, please go to the Battery Replacement Page for this battery.
Bypass Protected Areas
Bypassing a zone allows you to arm your system with certain protected areas intentionally unarmed or to
access a protected area when the system is armed.
To bypass a zone, open the door or window you want to bypass and keep it open during the
arming process.
Press the [Arm Doors & Windows] button. The system will announce that a sensor is open. Press
the [Arm Doors & Windows] button again to bypass those zones left open.
To unbypass, press [DISARM] + [security code].
For more information on this topic please visit the complete Simon Version 2 manual.
Change Date and Time
To change the date and time settings:
Enter your [security code].
Select [CLOCK SET] from the Start menu.
To change the clock settings, press and hold the [Hours] button.
Use the [+] and [-] keys to find and select the desired hour.
Use the [+] and [-] keys to find and select the desired minutes.
Press the [Done] button to set the time and exit the menu.
Chimes and Beeps
When your system is in chime mode, a chime alert will sound three tones whenever a protected
door/window is opened.
Simon Version 2 Quick Guide
https://alpha.adt.com/help/38.html[11/8/2018 11:50:02 PM]
To turn chime mode on and off, press the [CHIME Doors] button.
To turn voice chime on enter your [Access Code].
Select [Add] from the Start menu.
Select [Option #].
Select option [41], then select [Done] to turn the voice chime on.
The turn voice chime off, enter your [Access Code].
Select [Option #].
Select [Delete] from the Status menu.
Select option [41], then select [Done] to turn the voice chime off.
For more information on this topic please visit the complete Simon Version 2 manual.
Reset
To clear the display after an alarm event, press the [DISARM] button twice.
Security Codes
You can program up to 5 users. All additional users can arm and disarm the system, but cannot access
certain programming functions.
To add a new user, enter the [Master code] and select [Add] from the Start menu.
Select [Access Code] from the Main menu.
When the system prompts the user to change the Master Code, select [Access Code] to access
secondary user codes.
When the desired access code is announced, select [DONE].
Enter the new user’s 4 digit code.
To continue adding codes, select [Access Code].
To finish, close the keypad cover.
To delete a user, enter the [Master Code].
Select [Delete] from the Start menu.
Select [Access Code] from the Main menu.
When the system prompts the user to change the Master Code, select [Access Code] to access
secondary user codes.
When the desired access code is announced, select [DONE].
You may be required to enter to re-enter the Master Code.
To finish, close the keypad cover.
For more information on this topic please visit the complete Simon Version 2 manual.
Simon Version 2 Quick Guide
https://alpha.adt.com/help/38.html[11/8/2018 11:50:02 PM]
Return to Top
Trouble Conditions
Your security system is able to automatically test itself for power failures, low batteries, nonworking
sensors, and communication troubles with the central monitoring station. When your security system
detects a trouble condition, six rapid beeps will sound every minute for four hours until the trouble
condition is corrected.
To silence trouble beeps, press [STATUS] or arm/disarm the system.
For a complete list of Trouble Conditions, please refer to the Simon XT Troubleshooting page.
Volume
The speaker volume can be adjusted. To adjust the speaker volume:
Enter your [Access Code].
Select [Add] from the Start menu.
Select [Option #].
Select option [42] and follow the voice prompts to set the volume to high or low.
For more information on this topic please visit the complete Simon Version 2 manual.
How can we help?
Search
Andere Handbücher für Simon 2
1
Inhaltsverzeichnis
Andere ITI Sicherheitssystem Handbücher
ITI
ITI SX-V Bedienungsanleitung
ITI
ITI RF Commander III Planungshandbuch
ITI
ITI PinPoint System 128 Bedienungsanleitung
ITI
ITI SX-IVB Bedienungsanleitung
ITI
ITI SX-V Bedienungsanleitung
ITI
ITI SX-IVB Bedienungsanleitung
ITI
ITI Concord Express Bedienungsanleitung
ITI
ITI Commander 2000 Bedienungsanleitung
ITI
ITI Commander 3000 Bedienungsanleitung
ITI
ITI Concord Bedienungsanleitung
ITI
ITI Concord Bedienungsanleitung
ITI
ITI RF commander Bedienungsanleitung
ITI
ITI ITI UltraGard Bedienungsanleitung
ITI
ITI SIMON Bedienungsanleitung
ITI
ITI Commander IIII Bedienungsanleitung
ITI
ITI Commander III Merkblatt
ITI
ITI LifeGard Bedienungsanleitung
ITI
ITI SX-V Bedienungsanleitung
ITI
ITI Commander 2000 Service-Handbuch
ITI
ITI Caretaker Bedienungsanleitung
Beliebte Sicherheitssystem Handbücher anderer Marken
EDM
EDM Solution 6+6 Wireless-AE Bedienungsanleitung
Highway Safety Group
Highway Safety Group EA401 Bedienungsanleitung
Siren
Siren LED GSM Bedienungsanleitung
Detection Systems
Detection Systems 7090i Montageanleitung
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung
Siemens
Siemens FDM273 Bedienungsanleitung