ITOX G5M100-N Bedienungsanleitung

G5M100-N

System Board

User’s Manual

935-G5M103-050G

I81650649

This publication contains information that is protected by copyright.

No part of it may be reproduced in any form or by any means or

used to make any transformation/adaptation without the prior

written permission from the copyright holders.

This publication is provided for informational purposes only. The

manufacturer makes no representations or warranties with respect to

the contents or use of this manual and specifically disclaims any

express or implied warranties of merchantability or fitness for any

particular purpose.The user will assume the entire risk of the use or

the results of the use of this document. Further, the manufacturer

reserves the right to revise this publication and make changes to its

contents at any time, without obligation to notify any person or

entity of such revisions or changes.

Trademarks

Product names or trademarks appearing in this manual are for

identification purpose only and are the properties of the respective

owners.

Caution

To avoid damage to the system:

• Use the correct AC input voltage range.....

To reduce the risk of electric shock:

• Unplug the power cord before removing the system chassis

cover for installation or servicing. After installation or servicing,

cover the system chassis before plugging the power cord.

Battery:

• Danger of explosion if battery incorrectly replaced.

• Replace only with the same or equivalent type recommend

the manufacturer.

• Dispose of used batteries according to the battery manufactur-

er’s

instructions.

FCC and DOC Statement on Class B

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC rules.

These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a residential

installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with

the instruction manual, may cause harmful interference to radio

communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

• Consult the dealer or an experienced radio TV technician for

help.

Notice:

1. The changes or modifications not expressly approved by the

party responsible for compliance could void the user's authority

to operate the equipment.

2. Shielded interface cables must be used in order to comply with

the emission limits.

Notice

An electronic file of this manual is included in the CD. To view the

user’s manual in the CD, insert the CD into a CD-ROM drive. The

autorun screen (Main Board Utility CD) will appear. Click “User’s

Manual” on the main menu.

Table of Contents

Chapter 1 - Introduction

1.1 Features.................................................................................................................................

1.2 Special Features of the System Board.....................................................

1.3 Package Checklist.........................................................................................................

Chapter 2 - Hardware Installation

2.1 System Board Layout ...........................................................................................

2.2 System Memory...........................................................................................................

2.3 CPU........................................................................................................................................

2.4 Jumper Settings.............................................................................................................

2.5 Rear Panel I/O Ports..............................................................................................

2.6 I/O Connectors...........................................................................................................

Chapter 3 - BIOS Setup

3.1 Award BIOS Setup Utility....................................................................................

3.5 Updating the BIOS.....................................................................................................

Chapter 4 - Supported Softwares

4.1 Drivers, Utilities and Software Applications.........................................

4.2 Installation Notes..........................................................................................................

101

110

Introduction

112

114

Appendix A - Watchdog Timer

A.1 Watchdog Timer.........................................................................................................

Appendix B - System Error Messages

B.1 POST Beep.....................................................................................................................

B.2 Error Messages............................................................................................................

Appendix C - Troubleshooting

C.1 Troubleshooting Checklist.................................................................................

111

Introduction

Chapter 1 - Introduction

Features

Processor

• Intel®Pentium®M / Celeron®M processor (478-pin)

- 400MHz system bus

- Supports 64-bit host data bus and 32-bit addressing

• Processor socket: mPGA479M (Socket 479)

Chipset

• Intel®855GME chipset

- Intel®855GME Graphics Memory Controller Hub (GMCH)

- Intel®82801DB I/O Controller Hub (ICH4)

System Memory

• Two 184-pin DDR SDRAM DIMM sockets

• 2.5V unbuffered PC1600 (DDR200), PC2100 (DDR266) or

PC2700 (DDR333) DDR SDRAM DIMM with ECC support

• Supports 128Mbit, 256Mbit and 512Mbit technologies providing

maximum capacity of 1GB with x16 devices and up to 2GB with

high density 512Mbit technology

BIOS

• Award BIOS

• 4Mbit flash memory

Energy Efficient Design

• Supports ACPI specification and OS Directed Power

Management

• Supports ACPI STR (Suspend to RAM) function

• Wake-On-Events include:

- Wake-On-PS/2 Keyboard/Mouse

- Wake-On-USB Keyboard

- Wake-On-LAN

- Wake-On-Ring

- RTC timer to power-on the system

• System power management supported

• CPU stopped clock control

• Hardware supports SMI green mode

• Microsoft®/Intel®APM 1.2 compliant

Introduction

• Soft Power supported - ACPI v1.0a specification

• AC power failure recovery

Damage Free Intelligence

• Monitors CPU/system temperature and overheat alarm

• Monitors 5VSB(V)/VBAT(V)/±5V/±12V/CPU(V) voltages and

failure alarm

• Monitors CPU/chassis/2nd fan speed and failure alarm

• Read back capability that displays temperature, voltage and fan

speed

• Watchdog timer function

Onboard Graphics Features

• Up to 64MB of dynamic video memory allocation

• Display core frequency at 133/200/250MHz

• Render core frequency at 100/133/166/200/250MHz

• Intel®Dual-Frequency Graphics Technology

• 2D graphics engine

- Optimized 128-bit BLT engine

- 32-bit Alpha Blended cursor

- 8-bit, 16-bit and 32-bit color

• 3D graphics engine

- Enhanced Hardware Binning Instruction Set

- Bi-Cubic Filtering

- Linear Gamma Blending for Video Mixer Rendering (VMR)

- Video Mixer Rendering (VMR)

- 3D setup and render engine

- DirectX and OpenGL pixelization rules

- 266-MegaTexel/s peak performance

- 16- and 24-bit Z-buffering; 16- and 24-bit W-buffering

- Optimal 3D resolution

- Double and triple render buffer

• Graphics Power Management

- Dynamic Frequency Switching

- Memory Self-Refresh During C3

- Intel®Display Power Saving Technology

Introduction

Display

• Dedicated LFP (Local Flat Panel) interface

- Supports data format up to 24-bpp

• Analog display

- 350MHz integrated 24-bit RAMDAC

- Pixel resolution up to 1600x1200 at 85Hz and up to

2048x1536 at 75Hz

LFP (Local Flat Panel) LVDS Interface

• Single- or dual-channel LVDS panel support up to UXGA panel

resolution with frequency range from 25MHz to 112MHz (single/

dual channel)

• Integrated PWM interface for LCD backlight inverter control

Onboard Audio Features

• Realtek ALC202A

• 18-bit stereo full-duplex codec with independent variable

sampling rate

• High quality differential CD input

• True stereo line level outputs

• S/PDIF-out interface

• 2-channel audio output

Onboard LAN Features

• Intel 82562EM fast ethernet controller

- Basic 10/100 Client Connection

- IEEE 802.3, 10BASE-T/100BASE-TX compliant physical layer

interface

- IEEE 802.3u Auto-Negotiation

- 48-pin SSOP, 3.3V device

• Intel 82551QM fast ethernet controller

- Integrated IEEE 802.3, 10BASE-T and 100BASE-TX

compatible PHY

- Glueless 32-bit PCI master interface

- Glueless CardBus master interface

- 128 Kbyte Flash interface

- Thin BGA 15 mm2package

Introduction

IDE Interface

• Supports up to UltraDMA 100Mbps hard drives

• PIO Mode 4 Enhanced IDE (data transfer rate up to 14MB/sec.)

Rear Panel I/O Ports

• 1 mini-DIN-6 PS/2 mouse port

• 1 mini-DIN-6 PS/2 keyboard port

• 3 DB-9 serial ports.

• 1 DB-15 VGA port

• 2 RJ45 LAN ports

• 4 USB 2.0/1.1 ports

• Mic-in, line-in and line-out jacks

I/O Connectors

• 1 connector for 2 additional external USB 2.0/1.1 ports

• 1 connector for LCD brightness control

• 1 connector for LVDS LCD panel

• 1 connector for LCD/Inverter power

• 1 front audio connector for line-out and mic-in jacks

• 1 CD-in internal audio connector

• 1 S/PDIF-out connector

• 1 connector for IrDA interface

• 1 44-pin IDE 2 connector for 2.5" HDD

• 1 40-pin IDE 1 connector for 3.5" HDD

• 1 floppy connector (FPC connector type)

• 1 parallel connector

• 1 ATX power supply connector

• 1 Wake-On-LAN connector

• 1 Wake-On-Ring connector

• 1 chassis open connector

• 1 front panel connector

• 3 fan connectors

Expansion Slots

• 1 PCI slot for PCI expansion card or customized riser card slot

for 1, 2 or 3 PCI slots expansion (for low profile PCI card only)

• 1 Mini PCI socket (124-pin)

Inhaltsverzeichnis

Andere ITOX Hauptplatine Handbücher

ITOX

ITOX ML936-B Series Bedienungsanleitung

ITOX

ITOX G4V621-N Bedienungsanleitung

ITOX

ITOX ETX620-B Bedienungsanleitung

ITOX

ITOX G4V100-P Bedienungsanleitung

ITOX

ITOX G4M300-M12 Bedienungsanleitung

ITOX

ITOX PT330 series Bedienungsanleitung

ITOX

ITOX NP101-D16C Bedienungsanleitung

ITOX

ITOX G4E600-D Bedienungsanleitung

ITOX

ITOX SR960-N Bedienungsanleitung

ITOX

ITOX G4M300-P Bedienungsanleitung

ITOX

ITOX G4V620-N Bedienungsanleitung

ITOX

ITOX GCB60-BX Bedienungsanleitung

ITOX

ITOX PT630-NRM Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Biostar

Biostar M7VIT Bravo Bedienungs- und Montageanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung