ITS Telecom Master Unit EKOAX IPC-M Bedienungsanleitung
Master Unit EKOAX
IPC-M
User Manual
File
Release
Date
Author
Access
IPC-M_UserManual_V1.0.docx
001
2017/04/27
Ekselans
Confidential
© Copyright Ekselans, all rights reserved
V001
IPCOAX IPC-M User Manual
2 of 61
Confidential
Master Unit EKOAX IPC-M
Table of Contents
1. Introduction ........................................................................................................................5
1.1. Requirements ........................................................................................................................................................................................5
1.2. Functional Features..............................................................................................................................................................................5
2. Web management interface reference .......................................................................7
2.1. Login.......................................................................................................................................................................................................7
2.2. Web interface introduction ................................................................................................................................................................8
2.3. SLAVE menu ........................................................................................................................................................................................10
2.3.1. Authorization ...............................................................................................................................................................................10
2.3.1.1. Slave Basic Information......................................................................................................................................................15
2.3.1.2. Slave Configuration Information ......................................................................................................................................15
2.3.1.3. Slave MAC Table.................................................................................................................................................................21
2.3.1.4. Wifi Basic Configuration.....................................................................................................................................................21
2.3.1.5. Wan Configuration .............................................................................................................................................................25
2.3.1.6. Lan Configuration...............................................................................................................................................................31
2.3.1.7. Static Route Configuration................................................................................................................................................32
2.3.1.8. L2 Switch Configuration .....................................................................................................................................................32
2.3.1.9. Virtual Server Configuration ..............................................................................................................................................33
2.3.1.10. Wifi Management.............................................................................................................................................................33
2.3.1.11. Wifi Upgrade......................................................................................................................................................................34
2.3.2. Online ...........................................................................................................................................................................................35
2.3.3. Template......................................................................................................................................................................................36
2.3.4. Auto Upgrade .............................................................................................................................................................................38
2.3.5. MAC Limit.....................................................................................................................................................................................39
2.3.6. Wifi Upgrade................................................................................................................................................................................41
2.4. RF Menu ...............................................................................................................................................................................................42
2.5. Network Menu ....................................................................................................................................................................................43
2.5.1. Status ............................................................................................................................................................................................43
2.5.2. Config...........................................................................................................................................................................................44
2.5.3. VLAN .............................................................................................................................................................................................44
2.5.4. SNID...............................................................................................................................................................................................45
2.5.5. Filter...............................................................................................................................................................................................45
2.5.6. Igmp .............................................................................................................................................................................................45
2.6. Service Menu ......................................................................................................................................................................................46
2.7. System Menu.......................................................................................................................................................................................46
2.7.1. Information ..................................................................................................................................................................................46
2.7.2. Running Status.............................................................................................................................................................................47
2.7.3. Slave Type....................................................................................................................................................................................49
2.7.4. IP Access Control........................................................................................................................................................................51
2.7.5. System Time .................................................................................................................................................................................51
2.7.6. System Log...................................................................................................................................................................................52
© Copyright Ekselans, all rights reserved
www.Ekselans.com
IPCOAX IPC-M User Manual
V001
Master Unit EKOAX IPC-M
Confiential
3 of 61
2.7.7. Account .......................................................................................................................................................................................53
2.7.8. Reboot .........................................................................................................................................................................................53
2.7.9. Factory .........................................................................................................................................................................................55
2.7.10. Upgrade.....................................................................................................................................................................................55
2.7.11. Backup Restore.........................................................................................................................................................................55
2.8. Exit Menu .............................................................................................................................................................................................56
© Copyright Ekselans, all rights reserved
V001
IPCOAX IPC-M User Manual
4 of 61
Confidential
Master Unit EKOAX IPC-M
1. Introduction
The IP through coaxial cable system provided by EKSELANS, EKOAX, has been especially
designed to convert the coaxial network into a data network in a very easy manner. The
EKOAX equipment enables the transmission and reception of an internet signal via the
existing coaxial cable of a television installation, without having to undertake any actions
on the infrastructure.
Simply by adding a headend master equipment (IPC-M) and a slave (IPC-S) at each point
where the internet signal has to be carried, the television installation is upgraded to
transmit IP data at high speed. The IPC-S slave also acts as a Wi-Fi router allowing the
creation of a wireless network easily wherever the IPC-S is installed.
A single IPC-M master equipment supports up to 253 slaves with encrypted
communications. It is also possible to increase the number of IPC-S using the same
network by simply installing new master equipment in tandem (up to 4 IPC-M for the same
coaxial cable).
This user manual includes instructions to manage an IPC-M master unit.
1.1. Requirements
The IPC-M master unit can be manage through its web management interface. The
following runtime environment is recommended in order to use this web management
interface properly:
•Operating system: Windows 2000, Windows XP, Windows NT, Windows Vista,
Windows 7 or Windows 10
•Hardware requirement: CPU PIII 800 MHz, 256M RAM memory, 1 GB disk space and
10/100M Ethernet interface.
•
1.2. Functional Features
The web management interface supports the functions shown in the following table:
© Copyright Ekselans, all rights reserved
www.Ekselans.com
IPCOAX IPC-M User Manual
V001
Master Unit EKOAX IPC-M
Confiential
5 of 61
Item
Sub-item
Description
Slave Management
Authorization Management
To manage the slave by authorized and
unauthorized slaves lists.
Online Slave List
Show online authorized slaves
Configuring Template
Manage the slave configuration templates
Auto Upgrade
To manage the upgrading of slaves
MAC Limit
To limit the number of MACs per slave
WiFi upgrade
To manage the WiFi upgrade of slaves
RF
RF Info
To show RF information
Network
Status
To show running network status of the IPC-M
Config
To configure the IP type, IP, subnet mask,
gateway of the In-band network interface.
VLAN
To set the VLAN of uplink
SNID
To set the SNID of the master unit
Filter
To enable broadcast and multicast limiting
function and set the threshold parameters.
Igmp
IGMP query configuration
Service
Service configuration
To turn on or turn off some system services
System
Information
To display the system information, including
chip model, device type, software version,
hardware version, serial number, MAC
addresses and amount of online slaves.
Running status
To display the system running status, such
online time, memory size, remaining
memory, storage space, remaining space,
space utilization.
Slave Type
To add, edit and delete the slave types
IP Access Control
To enable the IP access control and
configure the IP addresses from where the
access is allowed.
System Time
To setup date and time of the system.
System Log
To display the system log and set the log
options.
Account
To manage the administrator account.
© Copyright Ekselans, all rights reserved
V001
IPCOAX IPC-M User Manual
6 of 61
Confidential
Master Unit EKOAX IPC-M
Item
Sub-item
Description
Reboot
To reboot the system
Factory
To restore factory settings
Upgrade
To upgrade the system from a FTP server.
Backup restore
To backup the current configuration and
restore it from a FTP server.
Exit
Exit
To exit from the web interface
Table 1
2. Web management interface reference
This section describes the usage and meanings of all the menus and parameters which
can be configure through the web interface of the IPC-M master unit.
2.1. Login
This topic describes the procedure to login to the web interface.
The following table shows the default parameters needed to connect to IPC-M web
interface.
© Copyright Ekselans, all rights reserved
www.Ekselans.com
IPCOAX IPC-M User Manual
V001
Master Unit EKOAX IPC-M
Confiential
7 of 61
Item
Description
User name and password
Default settings: Administrator:
- User name: admin
- Password: admin
LAN IP address and subnet mask of the IPC-M
Default settings:
IP address: 192.168.1.2 (Out-band Network –this
is the network available using the MGMT
Ethernet port of the unit)
IP address: 192.168.2,2 (In-band Network- this is
the network available using the
10/100/1000Mbps Ethernet port of the unit
Subnet mask: 255.255.255.0
LAN IP address and subnet mask of the PC used
for management
Configure the IP address of the PC to be in the
same subnet as the LAN IP address of the IPC-M
unit. For example:
IP address: 192.168.1.100 (from Out-band)
IP address: 192.168.2.100 (from In-band)
Subnet mask: 255.255.255.0
Table 2
Procedure:
Step 1: Use a network cable to connect the MGMT Ethernet port of the IPC-M unit to a PC.
Step 2: Ensure that your web browser does not use a proxy server.
Step 3: Set the IP address and subnet mask of the PC. For details, see Table Table Table
Table
Step 4: Login to the web interface:
1. Enter http://192.168.1.2 in the address bar of the web browser (192.168.1.2 is the
default IP address of the MGMT Ethernet interface of the IPC-M unit) and press
Enter to display the login interface, as shown in Picture
© Copyright Ekselans, all rights reserved
V001
IPCOAX IPC-M User Manual
8 of 61
Confidential
Master Unit EKOAX IPC-M
2. In the login interface, enter the user name and password. For the details about the
default setting of the user name and password, see Table.
2.2. Web interface introduction
After successfully login, web interface shows a web page as shown in Picture
Picture 1
© Copyright Ekselans, all rights reserved
www.Ekselans.com
IPCOAX IPC-M User Manual
V001
Master Unit EKOAX IPC-M
Confiential
9 of 61
On the left side of the page, there is a menu showing the following items:
•SLAVE
•RF
•NETWORK
•SERVICE
•SYSTEM
•EXIT
On the right side, the screen shows the following information:
•System information: it includes
◦Chip model
◦Device type
◦Software version
◦PIB (Parameter Information Block) and NVM (Non-volatile Memory) files
versions
◦HW versions
◦Serial number
◦MAC address of the main system block.
◦MAC address of Ethernet over coaxial cable block.
◦Number of online slave units (IPC-S).
•Device information: it includes
Picture 2
© Copyright Ekselans, all rights reserved
V001
IPCOAX IPC-M User Manual
10 of 61
Confidential
Master Unit EKOAX IPC-M
◦Name of the unit
◦Contact of the company.
◦Company location.
2.3. SLAVE menu
This topic describes how to manage the authorization of slaves, the online slave
configuration, the configuration template and the upgrading of slaves.
Important note: Before starting to set up the IPC-S slave, it is necessary to apply the
template 1 created by default in the IPC-M master. Thus the IPC-S remains properly bound
to IPC-M.
2.3.1. Authorization
Selecting the Slave→ Authorization menu, the web interface returns the management
authorization of slave, as shown on Picture:
There are two possible authorization modes which can be configured here:
•Auto Authorization: If this mode is selected, the slave is automatically added to the
list of the authorized slaves as soon as it is connected to the network through the
coaxial cable. This list is shown in the Slave Authorization table and it is also called
the White List.
Picture 3
Picture 4
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere ITS Telecom Steuereinheit Handbücher
Beliebte Steuereinheit Handbücher anderer Marken
Festo
Festo Compact Performance CP-FB6-E Stücklistenhandbuch
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung
JS Automation
JS Automation MPC3034A Bedienungsanleitung
JAUDT
JAUDT SW GII 6406 Series Kurzanleitung
Spektrum
Spektrum Air Module System Bedienungsanleitung
BOC Edwards
BOC Edwards Q Series Bedienungsanleitung
