iVistaTablet Digital Ink Pad+ Bedienungsanleitung
Page | 1
Digital Ink Pad+
User Manual
Page | 2
Welcome.
Dear user, thank you for purchasing this product.
Much investment in time and effort has gone into its development, and it is our hope
that it will give you many years of trouble-free service.
Notice
1. Purchasing new ink cartridges:
The dimension of the pen cartridge is 2.3~2.4mm (diameter) x 67mm (length). You
are recommended to use products of tested brands, such as KANGHER, MINI STAR,
SCHMIDT 628F, and ROTRING.
Note: Unqualified cartridges may affect the functionality of the digital ink pen.
Cartridges of unspecified sizes may cause damage to the digital ink pen.
2. Replace the battery of the digital ink pen when any of the followings occurs:
a. When the LED on the pen lights up.
b. The strokes of the pen show serious distortion.
c. Abnormal pen strokes appear on areas that you did not write on.
d. The pen strokes appear to be seriously missing or dragging.
3. Notes on maintaining the Digital Ink Pad+ and the digital ink pen:
a. Avoid using the device in places near sources of strong magnetic or electromagnetic
fields.
b. Do not place magnetic objects on the surface of the Digital Ink Pad+.
c. Do not disassemble the Digital Ink Pad+ or digital ink pen.
d. Do not drop the device heavily to a hard surface. Severe impact may cause
malfunction to the Digital Ink Pad+ and digital ink pen.
e. Do not tap or knock heavily on the digital ink pen cartridge. Doing so may cause
damage to the pen tip or the pen itself and result in malfunction.
4. Notes on formatting memory:
a. If the file information of the internal memory does not display correctly, please
format the internal memory on the computer.
b. If the file information of the purchased memory card does not display correctly,
please format the memory card on the computer.
5. Do not dispose of the Digital Ink Pad+ or digital ink pen at will:
If the device has become unusable, please dispose of the device according to the
environmental regulations enforced by your country.
Page | 3
Getting Started
The Digital Ink Pad+ is a handy device that captures your handwriting. While you
take notes on paper, the Digital Ink Pad+ also digitally records everything you write
or draw, so that you can present or edit your work on the computer. Besides, the
Digital Ink Pad+ can also serve as a regular tablet.
Driver installation
Before using the Digital Ink Pad+ as a tablet, you must install the tablet driver.
1. Place the Driver CD into the CD-ROM drive.
Place the accessory Driver CD into the CD-ROM drive of your computer and the auto
run screen will appear.
* The actual display may differ.
2. Start driver installations.
Click on the icon and the installation wizard will start.
Follow the on-screen instructions to complete the installation.
Page | 4
Package Contents
‧Digital Ink Pad+
‧Digital Ink Pen
‧Notebook
‧2 x replacement ink cartridges
‧USB cable
‧ZA13 (hearing aid type ) battery
‧Quick start guide
‧Software CD
Page | 5
The parts of Digital Ink Pad+
Front
Note: The synchronized editing button can be used in the Free Note application to
open the last file, record and edit files, refer to the Free Note manual for further
information.
When writing with the digital ink pen, the valid detectable height above the Digital
Ink Pad+ is about 13mm (around 135 sheets), and the valid writing area is A4 sized.
Page | 6
LCD panel
After the Digital Ink Pad+ is turned on, you can see the following icons displayed on
the LCD panel:
(a) Folder (A ~ Z).
(b) Page number (1 ~ 999).
(c) Current page contains contents. Current page is blank.
(d) Appears when writing with the digital ink pen.
(e) Icons displayed when hovering over the Ink Pad control buttons.
(f) Battery life indicator. Blank indicates no power. Flashing indicates low power.
(g) Memory storage indicator. Blank indicates no data.
(h) M: using internal memory; SD: using a SD card.
(i) Microphone recording displays the filename. This changes to when an MP3
file is being played.
Page | 7
The digital ink pen
Battery Installation
Unscrew the rear tube from the front tube. Install the supplied ZA13 (hearing aid type )
battery into the battery compartment and screw it onto the rear tube until tight. You
can then depress the top of the pen and start using it.
Changing the pen cartridge
The cartridge compartment can contain up to two replacement cartridges. When the
ink cartridge is running out of ink or you want to use a dummy cartridge, you can
replace the old cartridge with a new one.
1. Open the cartridge compartment cover.
Slide opens the cartridge compartment cover on the lower right side of the Digital Ink
Pad+. Inside the compartment you can find two replacement cartridges.
Page | 8
2. Pull out the old cartridge.
Insert the pen tip into the clip hole in the cartridge compartment.
Tilt the pen to grip the pen tip, and then gently pull out the old cartridge. Or you can
use the accessory tweezers to pull out the old cartridge.
3. Insert a new cartridge.
Insert a new ink/dummy cartridge and gently slide the cartridge into the pen.
Carefully tap the cartridge tip against a hard surface until the cartridge clicks into
place.
Page | 9
Inserting a memory card (optional)
In addition to the internal memory, the Digital Ink Pad+ can also store data on a
Secure Digital (SD) card.
To insert a memory card, gently push the card as indicated until the card reaches the
end of the slot
.
The SD card comes with a write-protect switch. Normally, the card is non-writable
when the write-protect switch is set to the lock position. If you neglect to set the
write-protect switch to the Unlock position during inking, this device allows the SD
card to become writable even if the write-protect switch is set to Lock.
When a memory card is inserted, the Digital Ink Pad+ will use the card as the main
storage medium. Files stored in the internal memory will become inaccessible until
the card is removed.
We suggest you use SD cards manufactured by SanDisk TM as they provide the best
compatibility with the Digital Ink Pad+.
The system will be powered off when you remove the SD Card.
Inserting a memory card (optional)
Page | 10
Inserting a notebook
To hold a sheet of paper on the Digital Ink Pad+, lift the paper clip upward and place
the paper on to the surface of the pad. Then release the paper clip to hold.
Inhaltsverzeichnis
Andere iVistaTablet Tablette Handbücher
