IXL PIT N GRILL IXLPIT Installationsanleitung
USE, CARE AND INSTALLATION
INSTRUCTIONS
FOR YOUR NEW IXL PIT N GRILL FIRE PIT
Models: IXLPIT IXLPITKIT IXLPGKITDEL
Stylish re pit with optional rotisserie ability & BBQ plates
for easy entertaining
Models: IXLPIT, IXLPITKIT, IXLPGKITDEL
Thank you for purchasing an IXL Pit ‘N’ Grill
If you enjoy an outdoor re, create a warm and enticing atmosphere in your backyard,
garden or whilst camping with the versatile Australian made and designed IXL Pit n Grill.
Not only can you enjoy a roaring open re, but with optional accessories you can create a
tantalising spit roast or delicious BBQ feast.
The IXL difference
Our re pits are designed and created in our factory in Geelong, Victoria. Their creation
was brought about by a passionate team of engineers and designers who love a ame re
and are enthusiastic campers, BBQ chefs and outdoors people.
Many hours were spent on the design and testing of our re pits to ensure their 2.4mm
mild steel constructed bowl and strong 5mm steel legs were up to the high quality of the
IXL brand. A wet spray high temperature coating was the nish added to the pits as further
insurance on outdoor protection and the product’s durability. We hope you enjoy many
hours with your IXL re pit.
Easy to Setup and transport
Our Pit n Grill range is designed for ease of use and transportation. The pit bowl is simply
lifted off the legs, which are slotted together. These are then removed and pack at. A
reusable crate is supplied with the pit for storage and transporting.
Take care when lifting & assembling your IXL PitNGrill as it is heavy.
WARNING:
Models: IXLPIT, IXLPITKIT, IXLPGKITDEL
CAUTION
Young children must be supervised when in the vicinity of this re pit, when in
operation.
This product is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities or lack of knowledge, unless they have
been given supervision or instructions concerning the use of the appliance
by a person responsible for their safety and have the capacity to follow these
instructions.
This product can become very hot and cause burns. Particular attention must be
given where children and vulnerable people are present.
This re pit is not intended for use by young children or inrm people without
supervision.
1. This appliance is for outdoor use only, and shall NOT be used in a building, garage,
or any other enclosed area.
2. Do NOT use this outdoor re pit for indoor heating. TOXIC carbon monoxide fumes
can accumulate and cause asphyxiation.
3. This outdoor re pit is NOT for commercial use.
4. This outdoor re pit is NOT to be operated by children.
5. This outdoor re pit is NOT to be used in or on boats or recreational vehicles.
6. Always use in accordance with all applicable local, state and national codes. Contact
your local council for details on outdoor burning.
7. When using this outdoor re pit, exercise the same precautions you would with any
open re.
8. The use of alcohol, prescription or non-prescription drugs may impair the consumer’s
ability to properly assemble or safely operate this outdoor re pit.
9. Do NOT use this outdoor re pit without reading the entire “Owner’s Manual”.
10. This outdoor re pit is recommended for use with dry, seasoned hardwood. It will
burn hotter, more completely and create less smoke. Or with heat beads and charcoal
when cooking.
WARNING:
Models: IXLPIT, IXLPITKIT, IXLPGKITDEL
CAUTION
Page 4
11. Do NOT burn manufactured logs, driftwood, trash, leaves, paper, cardboard, plywood,
painted or stained or pressure treated wood.
12. Do NOT alter this outdoor re pit in any manner.
13. Do NOT use this outdoor re pit until it is COMPLETELY assembled and all parts
are securely fastened and tightened.
14. Do NOT store or use gasoline or other ammable vapours or liquids in the vicinity of
this or any other appliance.
15. Do NOT store or use an LP gas cylinder within 10 feet (3.05 m) of this outdoor re pit
while it is in operation.
16. Do NOT use this outdoor re pit near automobiles, trucks, vans or recreational
vehicles.
17. Do NOT use in an explosive atmosphere. Keep outdoor re pit area clear and free
from combustible materials, gasoline and other ammable liquids.
18. Do NOT use this outdoor re pit under any overhead or near any unprotected
combustible constructions. Avoid using near or under overhanging trees and shrubs.
19. Always use this outdoor re pit on a hard, level non-combustible surface such a
concrete, rock or stone. Do NOT use on wooden decks.
20. Always empty this outdoor re pit before each use. Leave a thin layer of ash to
protect the bottom.
21. Do NOT wear ammable or loose clothing when operating this outdoor re pit.
22. Do NOT use in windy conditions.
23. Do NOT use gasoline, kerosene, diesel fuel, lighter uid or alcohol to light or
relight res.
24. Keep all electrical cords away from a hot re pit.
25. All surfaces of this outdoor re pit are hot when in operation. To avoid burns, do
NOT touch re pit until it has completely cooled unless you are wearing protective
gear (Potholders, gloves, BBQ mittens, hot pads & etc.). Never touch ashes or coals
to see if they are hot.
Models: IXLPIT, IXLPITKIT, IXLPGKITDEL
26. Do NOT leave a lit outdoor re pit unattended, especially around children and pets
27. Do NOT attempt to move or store this outdoor re pit until all ashes and coals are
completely extinguished.
28. Do NOT remove ashes or coals until they are completely and fully extinguished.
29. Use heat-resistant gloves or hot pads when contacting handles.
30. Use long, sturdy re pit tools when adding or moving logs.
31. Do NOT overload the re pit. Do not add additional rewood until the re burns down.
32. Do NOT lean over this outdoor re pit when lighting or when in use.
33. Do NOT place a hot cooking plate or re tool onto combustible surfaces such
as grass, wooden deck or furniture.
34. Avoid breathing smoke from the re and avoid getting it into your eyes.
35. This outdoor re pit should be thoroughly inspected and cleaned on a regular basis.
36. After a period of storage and/or non-use, check for signs of damage and creosote
build-up. Do NOT operate until necessary repairs and/or clean-up are executed.
37. Deaths, serious injury or damage to property may occur if the above is not
followed exactly.
CAUTION
PREPARATION
1. Check the crate tick box to ensure the Fire Pit Kit you purchased is the one marked.
2. Unpack the crate. Take out the components pack from the crate. Make sure what is
listed in the below check list are included, for the kit you purchased. If anything is
missing, ask your retailer to provide it to you, or contact the IXL distributor.
3. Ensure you have a Philips Head screwdriver (not supplied) suitable for M6 screws
on the crate.
4. Read this instruction manual carefully before installation and use. Keep this instruction
manual in a safe place.
FIRE PIT KITS
IXLPGKITDEL
Pit n Grill (deluxe kit) Fire pit with
1 x grill plate and 1 x at plate,
rotisserie brackets & plate lifter
26kgs
In Crate: 820 W x 820 D x 170 H
780mm (D) x 375mm (H)
IXLPITKIT
Pit n Grill (standard kit) Fire pit with
rotisserie brackets
19kgs
In Crate: 820 W x 820 D x 170 H
780mm (D) x 375mm (H)
IXLPIT
The IXL Pit (starter kit) Fire pit bowl
and legs
18kgs
In Crate: 820 W x 820 D x 170 H
780mm (D) x 375mm (H)
*
*
Models: IXLPIT, IXLPITKIT, IXLPGKITDEL
CAUTION
Page 6
ASSEMBLY SPECIFICATION
Models: IXLPIT, IXLPITKIT, IXLPGKITDEL
Step One: Pit Leg Assembly
Position lower leg on
level surface
Align central slots in
upper & lower leg
Slide upper leg into lower
leg slot to complete the pit
leg unit
1 2 3
Step Two: Pit bowl Assembly Position pit inside form feature on legs.
It will self locate.
Step Three: Hot plate Assembly
(for models applicable)
Locate plate to pit with tabs
to maintain position.
Place hot plate segments inside the pit as required.
Note: These will become too hot to touch when in use &
will require the plate lifting tool for removal if required.
ASSEMBLY SPECIFICATION
ASSEMBLY SPECIFICATION
Models: IXLPIT, IXLPITKIT, IXLPGKITDEL
Step Four: Rotisserie Assembly (for models applicable, rotisserie not included)
Step Five: Windshield Assembly (for models applicable, accessory item)
Page 8
Easy to t & remove with no mess to clean up
Gasmate Rotisserie will t
to upright arms
75mm Adjustable Height
Position to select desired
cooking intensity
Gasmate Rotisserie uses
2x DD Batteries for hassle
free operation
Easy to t & remove wind guards
channel heat & minimise air movement
within the cooking zone
Up to 2 hot plates can still
be used when cooking
with the Rotisserie & wind
guards tted.
LIGHTING AND TENDING
WOOD FIRE
It is preferable to leave a small amount of ash in the bottom of the bowl between burns. Put
some dry tinder in the centre of your re pit. Tinder are the small sticks, twigs, and leaves used
to get the re burning.
Stack your kindling on top of the tinder in a “tepee” structure. Light your kindling.
As the kindling starts to catch and burn, place a layer of dry seasoned hardwood that is cut to
lengths no more than ¾ of the diameter of the bowl.
You will need to tend to the re by adding logs, or shifting them around for an ideal atmosphere.
BBQ HEAT BEADS, CHARCOAL AND BBQ BRIQUETTES
You may wish to use BBQ heat beads, charcoal or briquettes, particularly for cooking. The
quickest way to heat these is to use re lighters with a charcoal chimney starter.
Fill the Chimney Starter all the way to the top with charcoal, heat beads or BBQ Briquettes.
Position the lighter cubes (approximately 4) on the charcoal grate and light them. They will go
grey in colour (approx. 30mins) once ready to transfer to your Pit n Grill.
Alternatively, you can light up directly into your re pit. Pour sufcient Heat Beads, Briquettes or
Charcoal to cover cooking area with one layer, but arrange into a pyramid over 2 - 4 relighters
and light. Leave for approximately 40 minutes, or until they go grey, indicating that they are hot.
WARNING: Remember to always use protective gear and re tools when tending to the re.
Do NOT add kerosene, fuel, alcohol, lighter uid, or gasoline to relight or enhance an
existing re.
Extinguishing
Allow the re to burn itself out and coals and embers to no longer glow. Use a shovel to spread
the ashes and embers around evenly.
Do NOT use water to extinguish as this is dangerous and can cause hot water to spit. If the re
needs to be put out quickly we suggest using sand spread over the embers and ash to smother
any remaining re. Do not bury the re or it will continue to smoulder underground and can
eventually reignite. Alternate stirring the ashes and adding sand to cool the re.
Models: IXLPIT, IXLPITKIT, IXLPGKITDEL
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere IXL Außenkamin Handbücher
