iv. In the opened dialog window edit the Data Source Name as “„ComGuardSMS“ and push the “Select”
button to find CGUARD.mdb database (C:\Program Files\Jablotron\ComGuard\ComTranspoter\
DTB\…). Confirm the setting.
v. Repeat the points iii. to iv. – as the Data Source Name insert GSMTransport a by the “Select” button
search the path to the TRANSPORT.mdb file. Confirm the setting.
g) Run the ConTransporter.exe.
In order to make system working, start the reading of the CGuard.mdb database by „Use SMS Mon. station“ button
pressing. See the “Tools” menu – “Setting” item – press the “Use SMS Mon. station” button. Every 10 seconds the
CGuard.mdb database will be read for new received messages.
3.3. ComTransporter Support installation
The ComTransporter Support works as a operation system service when is installed. The service checks the
ComTransporter running and in case of some running trouble or in case of GSM fault it sends an e-mail message to the
set address. Besides of that, ComTransporter Support cleans the CGuard.mdb database and replaced messages from the
database stores into extra *.csv files to the back up directory.
a) Search the “Comtransporter Support” directory on the installation CD. Find the ComTransporterSupport.exe
a ComTransporterSupport.xml files.
b) If your operation system is W2K copy these files into the C:\\Winnt\System32\…, otherwise copy them to
the C:\\Windows\System32\…
c) The service has to be install into the computer. Open any application which allows you to write system
commands into a command line(e.g. open “START” menu – “Run” item – into the edit line write “cmd” and
press the “OK” button)
d) Then the wanted application will be displayed on the screen.
e) By commands switch to the directory C:\\Winnt\System32\… (or C:\\Windows\System32\ … ) according to
the operating system.
f) Write the “ComTransporterSupport –i” command into the command line.
g) Than start the service: See the START menu – Setting – Control panels – Administrativ tools – Services,
find the ComTransporterSupport service and start it. Alternatively: write the “ComTransporterSupport –s”
command into the command line.
h) After any computer restart the service will be start automatically. If the service has to be uninstall from the
computer, it must be stooped at first. Write the “ComtransporterSupport – u” into the command line to
uninstall it.
3.4. The ComTransporter Support setting up
Before any change of the ComTransporterSupport.xml configuration file the ComTransporter Support service should
be stopped (see chap. 3.3).
a) Open the ComTransporterSupport.xml to edit it, use notepad, WordPad or other simple editor.
b) It is not necessary the perform any change in the <COMTRANSPORTER> section.
c) The setting of removing and back up of Cguard.mdb database:
− the <BACKUPDB> section contains parameters:
− <CLEARTIME> - the setting of time, when the database should be back up. The time is set in the
format: HHMM00
− <CLEARPERIOD> - the setting of period in days for back up of database CGuard.mdb. The event
which are older then set period will be removed from the database and stored into a *.csv file.
− <BACKUPPATH> - the setting of the path, where the removed event messages should be back up
into the ComTransporterDDMMYY.csv file. It is recommended to set the path to: C:\Program
Files\Jablotron\ComGuard\ComTransporter\backup\…
− the <LOGCLEANER> section:
− identifies the running ComTransporter application and set the cleaning of log files.
− the “name” is identification of particular ComTransporter in possible e-mail message
− the <CLEARTIME> and <CLEARPERIOD> is set in the same way as for back up of database (see
the chap. 3.2)
− <FILEPATH> parameter – the path, where is stored ComTransporter.exe file. The recommended
path is: C\Program Files\Jablotron\ComGuard\ComTransporter\…
