Jabra GN 9050 Bedienungsanleitung
GN 9050 Beta User Manual
1
GN 9050 WIRELESS HEADSET
SYSTEM
BETA USER MANUAL
GN 9050 Beta User Manual
2
Component list
1. Base station
2. Base stand
3. Remote
4. Interface cord
5. AC adapter
6. Battery
Remote Beltpack Functions
1. Headset Mode indicator-blinks when the system is in Headset mode, no light when
in handset mode.
1. Volume control- press + to increase volume and – to decrease volume
2. Mute button: Press to activate mute and press again to unmute.
3. Headset/Handset button/ handset lifter button: Press to enter Headset or Handset
mode (LEDs on the remote and base station light in Headset mode) No Lights in
Handset Mode. For use with optional handset lifter device, see handset lifter user
manual.
Base Functions
1. Transmit Settings: Adjusts the volume of your voice.
2. Telephone Compatibility Settings: Fine-tunes the system to your telephone system.
3. Battery Charge indicator: Lights when the remote is properly seated in the base
charger, blinks when battery is fully charged.
4. Base/Tone Control: Allows for choice of base and tone on receiver volume.
1
2
3
4
5
6
GN 9050 Beta User Manual
3
Audio Indicators
Battery Information
Basic Feature Set:
•2.4GHz, Digital FH-SST radio system
•Up to 150 feet range from base station
•Minimum of 50 concurrent users in one location w/ encryption/ security.
•System continuously checks link availability and generates a “no link” beep in the
belt unit in the event the base unit and belt unit cannot communicate.
•6 hours minimum portable talk time with standard battery
•12 hours minimum talk time with optional spare battery
•Connects to almost any type of telephone set via the handset port (RJ-9 port)
•Transmit volume adjustable at base unit (8 steps) via up/down buttons
•Receive volume (loudness) adjustable at portable unit (8 steps) via volume up/down
controls
•Belt unit has a mute button
•Base unit docks and charges the belt unit and can also charge a second spare
battery
−Fast charging allows batteries to fully charge within 3 hours maximum.
•ON/OFF switch located on remote.
•Beep tones are used in the belt unit (earpiece of the headset) to indicate low battery,
mute, max and min volume and out of range
•Base unit has LEDs to indicate charging status, in-use indication
•Compatible with ReadiLine and GN Netcom handset lifter accessory
Mute Tone sounds in headset every 15 seconds
Out of Range Tone sounds in headset every 10 seconds
Low Battery Tone sounds in headset every 20 seconds
Volume Tone sounds in headset at max and min levels
Battery Type Nickel Metal Hydride (NiMH) 3.6 V 500 mAH
Capacity on-line Fully charged battery provides 6 hours of talk time
Capacity off-line Fully charged battery provides 80 hours
Recharging Time Maximum of 3 hours
Battery Life 2 years if battery is recharged when not in use
GN 9050 Beta User Manual
4
BASE FRONT
In-Use
Indicator
Spare battery
charge
indicator
Remote
charge
indicator
Where Remote docks
to charge
GN 9050 Beta User Manual
5
AUX Jack
(underneath
plastic form)
Spare battery
slot
AC
Power
Jack
Base Stand
To Phone
RJ-9
Host Port
In-Use
Indicator
Spare battery
charge
indicator
Contacts for
Spare battery
slot
BASE REAR
To
Handset
GN 9050 Beta User Manual
6
The base unit contains the following Indicators/Buttons/Switches/Controls:
•Status Indicator: This indicates Base unit link status. The LED will be
constant when a link is established and while in headset mode.
•Remote unit Charge Indicator: This is a red/green LED that indicates red
when charging and green when fully charged.
•Spare Battery Charge Indicator: This is a red/green LED that indicates red
when charging and green when fully charged.
•Transmit Switch: This is a single, 8-position sliding switch that allows the user
to fine tune their transmit level. 1= low 8 = high.
•Telephone Compatibility Switch: 8-position compatibility switch configures the
9050 to telephone it will be used with. Allows for user to Connection used for
manufacturing and test purposes.
•Tone/Bass Control: Allows the user to choose between tone and bass
balance for receive volume.
GN 9050 Beta User Manual
7
BELT UNIT, FRONT
Mute
Button
Volume Up
Button
Volume Down
Button
On/Off
Button
Removable
Battery Pack
(behind)
In-Use
Indicator
Headset
2.5mm plug
Clip (behind)
Removable
Battery Pack
Headset
2.5 mm Plug
BELT UNIT, REAR
Clip
Clip contacts
(inside TBC)
Belt Unit
(behind)
GN 9050 Beta User Manual
8
The Remote unit contains the following Indicators/Buttons/Switches/Controls:
•““ON/OFF/Handset Lifter” Button: This button attempts to initiate a voice link
or terminates a link depending on the current link state as well as serves as
the handset lifter control button that raises and lower the handset on the
telephone when using it with the optional GNN handset lifter or Hello Direct
ReadiLine.
•“VOL UP” & “VOL DOWN” Buttons: These buttons control the receive volume
level in eight steps.
•“MUTE” Button: This button mutes the transmit path of the microphone.
Battery State:
Both the belt unit battery charger and the spare battery charger will employ smart
battery charging techniques to allow shorter recharging times. Each recharging circuit
will have a corresponding charge LED to indicate charge status.
CHARGE INDICATOR DESCRIPTION
OFF – Battery not present / not charging
RED – Recharging
GREEN – Fully charged
GN 9050 Beta User Manual
9
Setting Up
1. Connect all Cords.
Unplug the handset cord from the base of the telephone. Plug the Interface cord
into the vacated handset cord port on the telephone. The location of this port is
different for each phone and is often on the underside of the phone. Some
telephones must be programmed for headset use.
2. Attach the Base Stand.
Carefully insert the three plastic clips into the vacant base station holes.
3. Attach the battery to the remote:
Press the two buttons located on the side of the battery while carefully inserting
the plastic tabs into the remote. You should hear it click into place.
GN 9050 Beta User Manual
10
4. Connect the Headset to the Remote.
5. Charge the Remote
Slide the Remote into the Charger on either side of the base station. The Battery
Charge light on the front of the base station illuminates. Charge the battery for a
full three hours. You may use the handset while the battery charges.
Note: Battery Charge Indicator blinks green when battery is fully charged.
Andere Handbücher für GN 9050
2
Inhaltsverzeichnis
Andere Jabra Headset Handbücher
Jabra
Jabra PRO 9465 DUO Bedienerhandbuch
Jabra
Jabra GN 2200 Bedienungsanleitung
Jabra
Jabra Elite 7 Pro Bedienungsanleitung
Jabra
Jabra GN2115 Bedienungsanleitung
Jabra
Jabra GN 502 USB Bedienungsanleitung
Jabra
Jabra Engage 50 Stereo Bedienungsanleitung
Jabra
Jabra FR 20 Bedienungsanleitung
Jabra
Jabra BIZ 2400 USB Bedienungsanleitung
Jabra
Jabra STEALTH Bedienungsanleitung
Jabra
Jabra Pro 920 Duo Bedienungsanleitung
Jabra
Jabra PRO 9460 Duo Bedienungsanleitung
Jabra
Jabra BIZ 360 Bedienungsanleitung
Jabra
Jabra Engage 75 Mono Bedienungsanleitung
Jabra
Jabra CHILL Bedienungsanleitung
Jabra
Jabra GN9330e - USB - Headset Bedienungsanleitung
Jabra
Jabra GO 6430 Bedienungsanleitung
Jabra
Jabra 9350e Bedienungsanleitung
Jabra
Jabra PRO 9450 Bedienungsanleitung
Jabra
Jabra M5390 Bedienungsanleitung
Jabra
Jabra BT2040 - Headset - In-ear ear-bud Bedienungsanleitung
