Jabra GN 8110 USB Bedienungsanleitung

GN8110-USB

User Guide

GN8110-USB

Netcom

GN8110-USB Set Up

System Requirements

The GN8110-USB requires the following operating systems:

• Windows 98 SE (Second Edition)

• Windows 2000

• Windows ME (Millennium Edition)

• Macintosh OS 9.0.4 or greater.

You must have an available USB port. The GN8110-USB does

not work with earlier releases of these operating systems.

For the latest information on compatibility and use of this

product, go to the GN Netcom USB informational site at

www.gnnetcom.com/usb.

General

For Windows ME or Macintosh OS 9.0.4: You do not need to

install any software. Simply plug the USB connector into

any USB port on the computer.

For Windows 98 SE and Windows 2000:To use the GN8110-

USB the first time, you need to install the USB drivers necessary

for the computer to recognize the device.

Connect the GN8110-USB to your

Computer -Windows 98 SE and 2000

Turn on your computer and let it complete the boot-up process.

Make sure that you are not running any applications.

Plug the USB connector from the GN8110-USB into any

available USB port on the computer. Your headset does not need

to be plugged in at this time. The first time Windows detects that

the device is connected, it recognizes that there is new hardware

required and automatically launches the Add New Hardware

Wizard.

The Add New Hardware Wizard will launch three (3) times,

installing the following drivers:

• USB Composite Device (INF\USB\INF)

• USB Human Interface Device (INF\HIDDEV.INF)

• USB Audio Device (INF\WDMA_USB.INF)

These drivers are typically pre-loaded in Windows. No additional

software is needed. If you upgraded your system to Windows 98

SE or Windows ME, you may need to use the upgrade disk during

this installation.

1. The Add New

Hardware Wizard

indicates that it has

found the new USB

Composite Device.

Click Next.

2. The Wizard

prompts you to

search for the best

driver for your

device or select the

driver you want

from a displayed

list. Select Search

for the best driver

for your device.

Click Next.

3. Windows now

searches for new

drivers in a specific

location. Uncheck

all the boxes. Click

Next.

4. The Wizard

indicates that it is

ready to install the

best driver for this

device. Click Next

to install the driver.

5. Click Finish when the Wizard is complete.

Add New HardwareWizard - USB Composite Device

6. Next, the Wizard

automatically

installs the USB

Human Interface

Device. The Add

New Hardware

Wizard indicates

that it has found the

USB Human

Interface Device.

Click Next.

7. The Wizard

prompts you to

search for the best

driver for your

device or select the

driver you want

from a displayed

list. Select Search

for the best driver

for your device.

Click Next.

8. Windows now

searches for new

drivers in a specific

location. Uncheck

all the boxes. Click

Next.

9. The Wizard indi-

cates that it is ready

to install the best

driver for this device.

Click Next to install

the driver.

10. Click Finish when the Wizard is complete.

Add New HardwareWizard - Human Interface Device

11. Next, the

Wizard automatical-

ly installs the USB

Audio Device. The

Add New

Hardware Wizard

indicates that it has

found the USB

Audio Device.

Click Next.

12. The Wizard

prompts you to

search for the best

driver for your

device or select the

driver you want

from a list. Select

Search for the best

driver for your

device.

Click Next.

13. Windows

searches for new

drivers in a specific

location. Uncheck

all the boxes.

Click Next.

14. The Wizard

indicates that it is

ready to install the

best driver for this

device. Click Next

to install the driver.

15. Click Finish when the Wizard is complete.

Add New HardwareWizard - USBAudio Device

If theWizard Cannot Locate the Driver

16. If the Add New Hardware Wizard cannot locate the driver,

insert your Windows Operating System CD-ROM into the CD-

ROM drive. Once inserted, press Back, and check the box for your

CD-ROM drive (usually D). Click Next. Click Finish when the

Wizard is complete.

If the Wizard still does not locate the driver, go to the GN Netcom

website at www.gnnetcom.com/usb or contact GN Netcom

customer service at 1-800-826-4656 for help and additional

information.

Note: Do not unplug the USB connector from the computer while

an application that uses USB audio is running. This could cause a

system crash.

Headsets

The GN8110-USB is designed to work with GN Netcom profes-

sional headsets equipped with a Quick Disconnect (QD) which

mates to the Quick Disconnect jack on the device. Disconnecting

at the Quick Disconnect allows you to walk away from your

computer without removing your headset.

Before using your headset, join the Quick Disconnect to the

mating connector on the GN8110-USB as shown.

Testing

17. To test that the speaker volume in your head-

set is working and set at a comfortable level, click

once on the speaker icon in the system tray. Click

on the volume adjustment slider for a system

sound. Adjust the volume to a level that is com-

fortable for you. The Multimedia Properties win-

dow allows you to make advanced adjustments; go

to the Volume Controls section of this manual.

18. To test the microphone, use the sound recording utility that

comes with Windows. Go to Start/Programs/Accessories/

Entertainment/Sound Recorder.

19. Position the microphone

approximately one finger width

away from your lower lip.

20. Click the red

Record button and

record a voice file.

Click the Stop but-

ton when you are

done. Replay the

file by clicking the

Play button. If you

hear your voice,

recording is suc-

cessful and the

microphone is

working properly.

If you cannot hear your voice, go to the Frequently Asked

Questions section of this manual.

Warning! Although GN Netcom professional headsets have built-

in hearing protection, computers are capable of generating

extremely loud sound bursts such as modem connections. Always

check the volume level before putting on the headset.

1/2"

(12 mm)

Play Stop Record

Volume Controls

21. The volume for both

the speaker and microphone

are controlled by software.

Go to Start/Settings/

Control Panel to access the

Control Panel window.

Double click on the

Multimedia icon to bring

up the Multimedia

Properties window.

22. The Audio tab in the

Multimedia Properties

window lets you adjust the

Playback or speaker levels

and the Recording or micro-

phone levels.

23. Click the Playback

button in the Audio tab

to open the Speaker win-

dow. These controls allow

you to adjust the volume

output level for different

sources independently.

Most levels are adjusted

by the Speaker or Wave

sliders.

24. Click the Recording button in the

Audio tab to open the Microphone window.

Adjust the Volume sliders to the desired

levels.

Note: These controls adjust the volumes,

however, many other applications contain their own volume

controls as well. These independent applications may override the

Windows controls and work independent of the GN8110-USB

sound controls. Consult your software owners manual if you have

any questions.

Special Features

The GN8110-USB has several unique features to deliver superior audio quality. These include:

• Echo cancelation eliminates the distracting repeat effect common to Voice over IP applications (VoIP).

• Side tone allows you to hear your own voice in the headset speaker. It is part of regular telephone calls, but is not typically a part of

Internet/PC-based telephony.

• SmoothStream™ audio correction improves the sound of IP telephony calls by reducing the clicks and pops from lost bits and dropped

packets.

These features are preset at the factory to be active. If you need to disable these features, special software is available to help you do so.

Contact GN Netcom customer support at 1-800-826-4656 or visit the GN Netcom USB informational site at

www.gnnetcom.com/usb.

Inhaltsverzeichnis

Andere Jabra Telefonzubehör Handbücher

Jabra

Jabra JABRA FREEWAY HFS100 Technisches Datenblatt

Jabra

Jabra A7010 Multiuse Bedienungsanleitung

Jabra

Jabra DIAL 520 MS USB Bedienungsanleitung

Jabra

Jabra GN1000 Bedienungsanleitung

Jabra

Jabra LINK 14201-22 Bedienungsanleitung

Jabra

Jabra GN1000 Bedienungsanleitung

Jabra

Jabra A7010 Multiuse Bedienungsanleitung

Jabra

Jabra LINK 14201-19 Bedienungsanleitung

Jabra

Jabra JX20 - Pura - Headset Bedienungsanleitung

Jabra

Jabra DIAL 520 USB Bedienungsanleitung

Jabra

Jabra LINK 14201-17 - Bedienungsanleitung

Jabra

Jabra LINK 14201-20 - DATASHEET FOR TOSHIBA PHONES Bedienungsanleitung

Jabra

Jabra GN1000 Bedienungsanleitung

Jabra

Jabra A7010 Multiuse Bedienungsanleitung

Jabra

Jabra GN 8120 USB Bedienungsanleitung

Jabra

Jabra GN1000 Installationsanleitung

Jabra

Jabra GN1000 Bedienungsanleitung

Jabra

Jabra GN 1000 RHL - Netcom 1000 RHL Remote Handset... Bedienungsanleitung

Beliebte Telefonzubehör Handbücher anderer Marken

BT DIVERSE 5400 Bedienungsanleitung

Tadiran Telecom

Tadiran Telecom EMERALD ICE Bedienungsanleitung

Musicam

Musicam FieldFone II Bedienungsanleitung

Polycom

Polycom KIRK KIRK 4040 Technisches Datenblatt

TIPTEL

TIPTEL DECT Set 50 Bedienungsanleitung

Panasonic

Panasonic KX-UDS124 Bedienungsanleitung

BT BT7600 Technisches Datenblatt

View

View VP-PC Bedienungsanleitung

Baldwin Boxall

Baldwin Boxall BT8 Bedienungsanleitung

SMC Networks

SMC Networks SMCDPCR-AP Bedienungsanleitung

SkyLink

SkyLink SD-001 Bedienungsanleitung

Nera

Nera ISDN Bedienungsanleitung

MCheeta

MCheeta CT-CID803 Plus Bedienungsanleitung

YASKAWA

YASKAWA YRC1000 Bedienungsanleitung

Intellitouch

Intellitouch MOH-500E Bedienungsanleitung

Viking

Viking SQRG-12 Gebrauchsanweisung

Clarity

Clarity CE225 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen beocom 1401 Bedienungsanleitung