JACS TT800V Bedienungsanleitung
JACS Solutions | 8808 Centre Park Drive, Suite 305 | Columbia, MD 21045 | (443) 718‐4333
JACS Solutions INC
Best Practice Guide
GUIDE
BEST
PRACTICES
TT800V
Date: September 19, 2019
Version: 005
Copyright Reserved © JACS Solutions INC 2019 all rights reserved.
Note
This document is subject to change without notice due to product upgrades orany other
reasons. Unless agreed upon, this document can only be used as a guide. All the
statements, information, and recommendations for this document do not in any way
constitute any expressed or implied warranties.
TT800V Best Practices Guide
JACS Solutions Inc
2
TABLE OF CONTENTS:
1. INSTALLING VEHICLE ACCESSORIES:
............................................................................4-8
2. ADJUSTING YOUR DOCK
…………………………………………………………9
3. ENVIRONMENTAL CONSIDERATIONS
………………………………………………………10-11
4.TABLET BATTERY AND CHARGING
………………………………………………………12
5.TABLET CLEANING AND MAINTENANCE
..………………………………………………………13
6.BASIC TROUBLESHOOTING
………………………………………………………13-24
7.POWER TROUBLESHOOTING
…………………………………………………………25-30
8.FAQ
…………………………………………………………31-32
TT800V Best Practices Guide
JACS Solutions Inc
3
About the Document
Revision History
Date
Document
Version
Description
2 Aug 2017
002
Update version, combined several best practices into single doc
21 May
2019
003
Update version, pictures of parts with step by step instructions, and parts
listings
10June
2019
004
Update power issues, added pictures
19 July
2019
005
Update on touch panel issues, update on car battery installation of dock
charger, addition of pictures
19 Sep
2019
006
Updated pictures
Author Information
Author
Justin Cirwithian
Chris Montebon
Xaviera Myers
Yusuf Sahibzada
Date
2019/08/08
TT800V Best Practices Guide
JACS Solutions Inc
4
Installing Vehicle Accessory bundle
Parts List:
1. Mount Arm
2. Dock
3. USB Guide
4. Power Harness
5. Keys
6. Screws (4)
7. Hex Key (1)
8. Hex Bit (1)
To begin the installation of your TT800V tablet to your vehicle, follow the steps below:
Install the Mount Arm, as
shown in Figure A. Please
install the Mount Arm to the
vehicle with a total of 4 screws.
Note: These screws are NOT
included with the Mount Arm.
However, you may use a type
of screw that fits the base
square or an adhesive that
allows for full contact of the
base square.
The screws will be installed into
the base part of the Mount Arm
as shown in Figure B1.
To install the Dock into the
Mount Arm, line up the 4
screws that came along with
the Dock and place it inside the
mounting frame holes from the
inside of the Mount Arm. The
threaded ends should be
pointed in the direction towards
the Dock. When connecting the
Dock to the Mount Arm, use the
included Drill Bit for the screws,
as shown in Figure B2. Make
sure you do not over‐tighten
the screws, as it may damage
the Dock. Use all 4 screws
when installing your Dock as
shown in Figure C below.
TT800V Best Practices Guide
JACS Solutions Inc
5
Figure A
Figure B1 Figure B2
Figure C
TT800V Best Practices Guide
JACS Solutions Inc
6
Figure D Figure E
Connect a vehicle Power
Harness to the micro‐USB port
on the Dock, as shown in
Figure D. Additionally, the USB
guide on the dock can also be
used to provide additional
support to the connector, as
shown in Figure E.
When installing the Power
Harness (Figure HP), do so
when the vehicle is parked,
turned off, and the engine
has cooled off after a period
of time. Attach the red cable to
the positive power source, and
attach the blue cable, the
negative ground cable, to its
vehicle battery source. Note:
The connection points will vary
from vehicle to vehicle. You
should consult your manual for
further assistance.
Using the included keys with
your tablet Dock, unlock the
Dock prior to inserting your
tablet. The key’s position is
shown in Figure F. Insert the
tablet into the Dock. Ensure
you start by pressing the
bottom latches of the tablet as
shown in Figure G1 into the
notches of the Dock first, as
shown in Figure G. You should
hear a click when the tablet
connects. Turn the key to lock
the tablet into place, and check
the top left button to make sure
it cannot be pressed as shown
in Figure H. If the top left button
presses in when pushed, the
tablet is not secure/locked. You
may now remove the keys from
the Dock lock. Vehicle
installation is now complete for
the TT800V.
TT800V Best Practices Guide
JACS Solutions Inc
7
Figure F
Figure G
Figure G1
TT800V Best Practices Guide
JACS Solutions Inc
8
Figure H
Figure HP
TT800V Best Practices Guide
JACS Solutions Inc
9
Adjusting your Dock
Hold the Dock with one hand to prevent the tablet from falling and impacting against the
vehicle if the tablet is in the Dock. Loosen the middle screw in the Mount using the Hex
Key as shown in Figure I. Alternatively, the twist handle on the Mount can be used for
adjustment. Adjust the tablet and Dock to the preferred angle and location. Once the
preferred angle and location have been made, be sure to tighten all connections that
were loosened for the adjustment.
Figure I
TT800V Best Practices Guide
JACS Solutions Inc
10
Environmental Considerations
The TT800Vis built to operate in a wide temperaturerange. If the internal temperature
of the device exceeds certain temperatures, the device will power off to protect its
internal components from the extreme heat. Once the temperature in the room/area
normalizes, the tablet will then be able to resume normal functionality and activity. The
following are the internal temperature thresholds for the device:
Battery Operational Temp: 0°C to 55°C (32°F to 130°F)
Device Storage Temperature: ‐20°C to 60°C (‐4°F to 140°F)
To help prevent the devicefrom overheating, the following actionsare suggested:
1. Do not leave the device(s) in direct sunlight for extended periods of time in a
confined vehicle environment.
2. Do not place device(s) on hot surfaces beyond more than the above
temperatures.
3. Do not leave the device(s) in the vehicle for extended periods of time under
extreme heat conditions.
4. Store in a cool, dry place.
5. Keep a sunscreen reflector on the vehicle windshield from inside.
Keep the area surrounding the device clear of additional items or clutter. Circulating
air will help cool the tablet. Note: Extreme fluctuation in temperature and
operational temperature could cause the tablet to overheat and catch fire,
or result in a shorter battery life. We ask that you please consider the
suggestions made in the user manual and only use the tablet in acceptable
and non-extreme environmental conditions.
Andere Handbücher für TT800V
1
Andere JACS Tablette Handbücher
