Jaeger-leCoultre Master Compressor Diving Chronograph Bedienungsanleitung

Introduction

We congratulate you on the purchase of your Jaeger-LeCoultre watch and thank

you for your conﬁdence.

Representing a new generation of divers’ watches, the Master Compressor

Diving watch is distinguished by its ultra-high resistance case. Perfectly suited to

exploring the ocean depths, it ensures optimum readability thanks to oversized

numerals and hour-markers, along with luminous hands.The unidirectional bezel

serves to calculate elapsed diving time using its luminous reference triangle.

We invite you to consult the operating instructions and we wish you great

pleasure with your Jaeger-LeCoultre timepiece.

Master CoMpressor Diving Chronograph

1Minute hand

2Chronograph pushpieces

3Compression key

4Crown A (at 3 o'clock)

5Minute counter

6Date

7Operating indicator

8Pulsometric scale

9Diving bezel

10 Hour counter

11 Hour hand

12 Chronograph seconds hand

300

1Minute hand

2Compression key

3Crown A (at 3 o'clock)

4Date

5Operating indicator

6Diving bezel

724-hour 2nd time zone (or reference time)

indicator

8Local hour hand

Master CoMpressor Diving gMt

Master CoMpressor Diving Chronograph & gMt - English 1/9

Accuracy

Mechanical models with manual or automatic

winding

The accuracy of the mechanical movement models is determined

by the balance.This makes 21,600 or 28,800 vibrations per hour,

depending on the model (see technical characteristics).

Despite all the care with which the Jaeger-LeCoultre master-

watchmakers have made and assembled your watch, its

accuracy is subject to the inﬂuence of gravity, magnetic ﬁelds,

impacts and ageing of the oils.The accuracy is measured by its

rate regularity in various positions.

The nature of your constitution or lifestyle may lead to slight

irregularities. If you observe slow or fast running of your

watch, you are advised to take it to an approved Jaeger-

LeCoultre retailer, who will make any necessary adjustments.

Quartz models

Jaeger-LeCoultre quartz watches contain a battery

and electronic components. In service operations,

your ofﬁcial Jaeger-LeCoultre Service Centre

or authorised Jaeger-LeCoultre retailer will be

responsible for recovering them and disposing of them in

accordance with current standards.

The quartz models are accurate to within 2 to 3 minutes

per year.

Water resistance

Jaeger-LeCoultre watches are water resistant to 3, 5, 10,

20, 30 or 100 atm, depending on the model (see technical

characteristics).This property is identiﬁable by the

symbol engraved on the case-back. This means that your

timekeeper has been tested to an immersion pressure

equivalent to 30, 50, 100, 200, 300 or 1000 metres,

according to the number of atmospheres shown beside the

aforementioned symbol (1 atm = 10 metres).

Please note also that leather straps are not suitable for aquatic

activities.

It is essential to have your watch’s water resistance checked

by an authorised Jaeger-LeCoultre retailer on a regular basis

and deﬁnitely before any period in which it will be subjected

to prolonged and/or regular immersion.

The “1000 Hours Control” test

by Jaeger-LeCoultre

Jaeger-LeCoultre subjects its watches to the rigourous

“1000 Hours Control” test programme. Unique in its kind,

this test consists of 1000 hours of comprehensive, stringent

checks.

The“1000 Hours Control” seal or marking afﬁxed or engraved

on the back of your watch certiﬁes that it has undergone this

observation programme in our laboratories and has passed all

the tests : rate regularity checks, temperature and atmospheric

pressure tests, resistance to impacts and magnetic ﬁelds and

water resistance tests. Your watch is therefore capable of

withstanding the trials of everyday life when you wear it on

your wrist.

Compression keys

The compression key ﬁtted on the crowns of Master

Compressor line watch models is a patented system which

enables additional compression of the 4 crown gaskets, which

boosts your watch’s water resistance in the long term.

The “open” or “closed” position of the compression key is

indicated by the arrow symbols (viewed from the front):

- The compression key is in the compressed gasket position

(“closed”) if the indicator shows only one arrow; the keys

must be closed when you wear your watch and when

you are taking part in sports. You must not make any

adjustments or set the time in this position, since this might

damage the gaskets.

- The compression key is in the non-compressed gasket

position (“open”) if the indicator shows two arrows; in this

conﬁguration, you can then start the watch and set the

functions as per the explanations below.

The switch from the “closed” to the “open” position, or vice-

versa, is made by turning the key using the wing-nuts in the

direction indicated by the arrow(s).

Note :

The water-resistance function of the compression key is

separate from the operation of the crown itself. Even in

the closed position, the key does not lock the crown. So in

practice it is possible to handle the crown when the key is

in the compressed gasket position. However, as mentioned

earlier, it is extremely inadvisable to make adjustments in this

position, since this might damage the gaskets.We recommend

that you ﬁrst turn the compression key to the “open” position

before making any adjustments to your watch.

Master Compressor Diving, diver’s watches

satisfying the NIHS 92 -11 (ISO 6425) standards

Master Compressor Diving line watches, which bear the

title “diving watches”, satisfy the requirements of the Swiss

Watchmaking Industry Standard (NIHS) 92-11, reproducing

the European standard ISO 6425.

Notice

As a precaution, we draw your attention to the following two

recommendations :

- You must not adjust the crowns in water,

- You must not use Master Compressor Diving watches

for deep dives (diving with a gas mixture, in which the

diver spends alternating periods between the water and

a pressurised chamber), or at a depth greater than that

indicated.

Wing-nuts

Compressed gasket position or

"closed" position

Non-compressed gasket position or

"open" position

Master CoMpressor Diving Chronograph & gMt - English 2/9

Master CoMpressor Diving

Chronograph

Technical characteristics

- Automatic movement, Calibre 751D.

- 28,800 vibrations/hour.

- Power reserve: approximately 65 hours.

- Crown with compression key.

- Pushpieces with compression wing-nut.

- Water resistant to 1000 metres.

Movement

Use

Starting the watch

Crown A

Turn the compression key to the “open” position in the

direction of the arrow. Crown “A” will then be in position 1.

A few clockwise turns of the crown will sufﬁce to start the

watch. It will then automatically wind up when you wear it.

Please note that the crown does not lock on winding, even

when the watch is fully wound.

Once the operation is complete, turn the compression key to

the “closed” position in the direction of the arrows.

Setting the time

Crown A

Turn the compression key to the “open” position in the

direction of the arrow.

Then pull crown A out to position 3.

The movement will then be locked (“stop seconds” function).

To ensure accurate time setting in terms of seconds, stop the

seconds hand at 60.

Move the hands forward clockwise to the desired time and, on

the hour signal, push the crown back to position 1.The watch

will start running again.

Once the operation is complete, turn the compression key to

the “closed” position in the direction of the arrows.

Setting the date

Crown A

Turn the compression key to the “open” position in the

direction of the arrow.

Then pull crown A out to position 2.

Move the date forward by turning the crown clockwise.

Make the required number of turns until the desired date is

displayed.

NB: Date corrections must not be made between 22.30

and 03.30. During this period the automatic date-change

mechanism is already in action.

Once the operation is complete, push the crown back into

position 1 and turn the compression key to the “closed”

position in the direction of the arrows.

Chronograph operation

The central seconds hand on your Master Compressor

Diving Chronograph watch displays the chronograph seconds

with an eighth-of-a-second deﬁnition. A counter located

at 3 o’clock times the minutes up to 30 minutes (after 1

revolution it starts counting another 30 minutes). Another

counter located at 9 o’clock times the hours up to 12 hours

(after one revolution it starts counting another 12 hours).

- Pushpiece at 2 o’clock : this pushpiece starts and stops the

chronograph function.

- Pushpiece at 4 o’clock : this pushpiece resets the counters

and the central seconds hand. When timing is in progress,

pressing this pushpiece has no effect.

Each of these 2 pushpieces is ﬁtted with wing-nuts with

a patented compression system. This enables additional

compression of one of the 3 pushpiece gaskets, ensuring

optimum water resistance.

Another beneﬁt of this system : it enables the pushpieces

to be locked in the closed position, thereby preventing any

unintentional adjustment of the chronograph.

To enable use of the chronograph functions, move the

pushpieces into the “open” position by turning the wing-nuts

a quarter of a turn downward. The non-compressed gasket

position (“open”) will be indicated by an arrow (front view

of watch).

Jaeger-LeCoultre Calibre 751D.

300

1 2 3

Master CoMpressor Diving Chronograph & gMt - English 3/9

Timing

- Pressing once on the pushpiece at 2 o’clock activates

the chronograph. The central seconds hand turns, and

the minute and hour totalising counters will be running.

Pressing the pushpiece at 2 o’clock again will stop the

chronograph and give a time reading.

- Reset by pressing the pushpiece at 4 o’clock to make

another timing measurement.

- It is possible to accumulate timing measurements by

pressing the pushpiece at 2 o’clock again (without resetting

the counters). Timing starts again and is added to the

previous measurement.

Once the timing operation has been completed, move the

pushpieces into the compressed gasket (“closed”) position

by turning the wing-nuts a quarter of a turn upward, in the

direction shown by the single arrow.

Pulsometer

The pulsometer indicates the heart beats per minute of the

watch wearer.

The inner ring of the Master Compressor Diving Chronograph

watch is equipped with a heart rate reading scale, on the basis

of 30 observed beats.

Using the pulsometer

- Set both the chronograph pushpieces to the “open”

position by turning the wing-nuts a quarter of a turn

downward.The non-compressed gasket position (“open”)

will be indicated by a single arrow (front view of watch).

- Reset the seconds hand by pressing the pushpiece at

4 o’clock to be ready to make another measurement.

- Put your hand on a part of your body where you can easily

feel your heartbeats.

- Press the pushpiece at 2 o’clock once and count your

beats.The central seconds hand will turn (the minute and

hour totalising counters will also be running, but are not

used for this measurement).

- When you feel the 30th beat, press the pushpiece at

2 o’clock again to stop the chronograph.

- Read the number of beats per minute indicated by the

central seconds hand on the pulsometer ring scale.

- Set the pushpieces to the compressed gasket position

(“closed”) by turning the wing-nuts a quarter of a turn

upward, in the direction shown by the arrow.

Operating indicator

The aperture at 6 o’clock reveals a two-coloured luminous

disc which completes one revolution every 60 seconds.This

function, known as the operating indicator, indicates that the

watch is running.

Diving bezel

The Master Compressor Diving Chronograph watch model is

equipped with a one-way rotating bezel (can only be turned

anti-clockwise), with a mark every minute.

It can measure a particular time using the luminous white

triangular marking as a reference point in relation to the hour

hand or minute hand.

To move the diving bezel, you need only grip it with two

ﬁngers and turn it anti-clockwise to the desired position.

Compressed gasket position

("closed")

Non-compressed gasket position

("open")

Example : the chronograph seconds hand

indicates 49 on the tachometric scale,

i.e. 49 beats per minute

Master CoMpressor Diving Chronograph & gMt - English 4/9

Master CoMpressor Diving gMt

Technical characteristics

- Mechanical automatic movement,

Calibre 975D.

- 28,800 vibrations/hour.

- Power reserve: approximately 48 hours.

- Crown with compression key.

- Water resistant to 1000 metres.

Movement

Functions and displays

The Master Compressor Diving GMT watch model features a

double set of hands which enables the local time on the main

display to be changed rapidly by moving the corresponding

hand forward or backward in 1-hour jumps, while maintaining a

reference time by means of a second hour hand.

The watch offers the following functions:

- Local time, with 2-way independent quick setting.

- Date synchronised with local time; 2-way adjustment.

- 24-hour reference time (2nd time zone).

- Minutes.

- Operating indicator.

You can use the local time and reference time displays at your

convenience, according to the options listed below. Whichever

one you choose, the local time function enables you to move the

hour hand of the main display rapidly in 1-hour jumps in either

direction, while driving the date.

- Display the same time on the local time display and

reference time display. In this conﬁguration, when you are

travelling, you will have your travel time displayed on the

main set of hands, while the reference hands (2nd time

zone) will keep track of your home time. On returning

from your trip, you can restore your home time to the

main display just as quickly.

- Set the time of another time zone on the reference time

display, so as to keep permanent track of the time there,

with day/night indicator (24-hour display).

- Show the ofﬁcial GMT time on the reference time display,

so that any time zone can be deduced from its difference

from the time in the second time zone, and can then be

displayed with the local hands.

Use

Crown A (at 3 o’clock) is used for :

- Winding the watch if it has not been worn for over

48 hours (position 1).

- Setting local time and date (position 2).

- Setting the time in the 2nd time zone (or reference time)

(position 3).

The settings must be made in the order indicated below, as

per the following instructions :

1) Reference time (2nd time zone), and minutes.

2) Date.

3) Local time.

Starting the watch

Crown A

Turn the compression key to the “open” position in the

direction of the arrow. Crown “A” will then be in position 1.

A few clockwise turns of the crown will sufﬁce to start the

watch. It will then automatically wind up when you wear it.

Please note that the crown does not lock on winding, even

when the watch is fully wound.

Once the operation is complete, turn the compression key to

the “closed” position in the direction of the arrows.

Setting the reference time (2nd time zone)

This setting drives all functions : reference time (time in the

2nd time zone), local time, minutes, date. It ﬁrstly enables you

to set the reference time (second time zone), and also to

make an accurate minutes setting.

Crown A

Turn the compression key to the “open” position in the

direction of the arrow.

Then pull crown A out to position 3.

The movement will then be locked (the operating indicator

will also stop).

Move the reference time (second time zone) hour hand and

minute hand forward in either direction to the desired time,

taking the 24-hour display into account.

NB : During this operation, the local time hour hand (and the

date) is driven, maintaining its difference from the reference

time. The local time will be set independently, as indicated

below.

Once the operation is complete, push the crown back into

position 1 and turn the compression key to the “closed”

position in the direction of the arrows.

Jaeger-LeCoultre Calibre 975D.

1 2 3

Master CoMpressor Diving Chronograph & gMt - English 5/9

Setting the date

Crown A

Turn the compression key to the “open” position in the

direction of the arrow.

Then pull crown A out to position 2.

You may turn the crown in either direction, as the main hour

hand and the date are driven either forward or backward

depending on the chosen direction. Note that to correct

the date by one day, the local time hand must complete

two revolutions of the dial.The minutes hand keeps running,

maintaining an accurate watch setting. The hour hand moves

in 1-hour jumps.

Turn the crown forward or backward (depending on the

closest distance between the date indicated and the desired

date), and turn the hour hand as many times as necessary

until the desired date is displayed.

Setting the local time (main display)

After setting the date, move the local time forward or

backward past midnight to bring it to the desired time, in

order to take account of the date indicator:

- You have turned the crown clockwise : if the date moves

forward when the hands pass midnight, you are moving

into the morning.

- You have turned the crown anti-clockwise : if the date

moves backward when the hands pass midnight, you are

moving back into the evening.

Once the operation is complete, push the crown back into

position 1 and turn the compression key to the “closed”

position in the direction of the arrows.

Operating indicator

The aperture at 6 o’clock reveals a two-coloured luminous

disc, which completes one revolution every 60 seconds.This

function, known as the operating indicator, indicates that the

watch is running.

Diving bezel

The Master Compressor Diving GMT watch model is

equipped with a one-way rotating bezel (i.e. one that can only

be turned anti-clockwise), with a mark every minute.

It can measure a particular time using the luminous white

triangular marking as a reference point in relation to the hour

hand or minute hand.

To move the diving bezel, you need only grip it with two

ﬁngers and turn it anti-clockwise to the desired position.

Adjusting the wristlet

NB: The visuals of the wristlet illustrated below may not

correspond to your wristlet, but the demonstration illustrated is

completely identical and valid.

Adjusting the clasp

The clasp on metal bracelets and articulated rubber straps is

ﬁtted with an adjustment system enabling you to lengthen or

shorten the wristlet by 4 mm on either side, for greater wearer

comfort.

Using the ﬁne adjustment system

Switching from the long position to the short position :

Remove your watch.

Hold your clasp open between the thumb and foreﬁnger of

one hand, with the wristlet section in your other hand (ﬁg. 1).

Fig. 1

Lift up the clasp cover so

as to release the hinged

part of the wristlet section

from its groove (ﬁg. 2).

Fig. 2 Long position

Push down the hinged

part of your wristlet sec-

tion and place it in its

groove, facing the oppo-

site way to its initial posi-

tion (ﬁg. 3).

Fig. 3 Shortened position

The switch from the short

to the long position is made

in the same way, but in the

opposite direction (ﬁg. 4).

Fig. 4 Extended position

Master CoMpressor Diving Chronograph & gMt - English 6/9

Hold the case in one hand,

with the watch placed crystal

down on a support.

With the other hand grip the

"fork" tool supplied with the

watch, and slide it between the

horn and wristlet, in order to

grip the wristlet bar between

the teeth of the fork.

Make sure that the tool is cor-

rectly positioned on the bar,

on the retractable end of its

spindle.

The bar is equipped with a

spindle mounted on a spring,

which needs to be released. To

do so, press the tool onto the

bar's retractable end, sliding it on

laterally (from the end opposite

the horn) to act on the spring.

Once the spring has been

released, take out the bar,

and pull the wristlet section

towards you to extract it.

Retractable end

of the bar

Dismantling and reassembling wristlets

To alter the wristlet of your Master Compressor Diving, you

can remove and reﬁt the wristlet sections.

Dismantling the wristlet Reassembling the wristlet

Insert one end of the bar into

the hole in the horn of the

case, and hold it ﬁrmly.

Take the tool supplied, and

position it on the free retract-

able end of the bar. Holding

the tool in this position, press

sideways (from the end oppo-

site the horn) to push the

spring back inside the bar.

Move the retracted bar to

over the housing hole in the

horn, and release it so as to

engage the spring.

Make sure that the wristlet

is properly ﬁtted by pulling

gently on the section.

Master CoMpressor Diving Chronograph & gMt - English 7/9

This International Guarantee applies to Jaeger-LeCoultre

products sold or presented for guarantee repairs in all

countries except the United States of America and Canada

(for those two countries, see the Limited Warranty).

The manufacturer’s International Guarantee applies only

to Jaeger-LeCoultre products purchased from authorised

Jaeger-LeCoultre retailers. In addition, all maintenance and

repair works must be carried out either by an authorised

Jaeger-LeCoultre retailer or by an ofﬁcial Jaeger-LeCoultre

Service Centre. If these conditions are not met, the

manufacturer’s guarantee does not apply. For a list of

authorised Jaeger-LeCoultre retailers worldwide, please

contact Jaeger-LeCoultre or its Distributors.

Jaeger-LeCoultre watches

The terms and conditions of the Jaeger-LeCoultre

International Guarantee

The following terms and conditions of the Jaeger-LeCoultre

International Guarantee apply to watches sold or presented

for guarantee repairs in all countries except the United States

of America and Canada (for those two countries, see the

Limited Warranty).

Your Jaeger-LeCoultre watch is guaranteed against all

manufacturing defects for two years from the date of

purchase, subject to the following conditions.

Any part found by our technical services to be defective as a

result of a manufacturing defect will be, at the sole discretion

of Jaeger-LeCoultre, repaired or replaced free of charge.

The Jaeger-LeCoultre International Guarantee is valid only if

the guarantee certiﬁcate enclosed with this booklet has been

duly completed, dated, stamped and signed by the authorised

Jaeger-LeCoultre retailer who sold your watch.

This International Guarantee does not cover defects resulting

from accidents, mishandling or incorrect or abusive use (for

example, knocks, dents, crushing, excessive temperatures,

powerful magnetic ﬁelds), the use of or effect of using

batteries other than those designated by Jaeger-LeCoultre,

unauthorised alteration or repair or the consequences of

normal wear and ageing of the watch, the strap or the glass,

the loss of water resistance after two years after the date

of purchase if your watch is water-resistant, and any defect

resulting from the contact with water if your watch is not

water-resistant.

Jaeger-LeCoultre water-resistant watches may be identiﬁed

by the symbol engraved on the back. Their water

resistance is guaranteed for two years from the date of

purchase, provided that the glass, the bezel, the back, the

middle part and the crown have not been damaged. It

is essential to have the water resistance checked by an

authorised Jaeger-LeCoultre retailer or an ofﬁcial Jaeger-

LeCoultre Service Centre at least once a year, and in any

event, prior to any period of intensive use. Please refer to the

operating instructions for further details.

For quartz watches, this guarantee does not cover the battery

life.

As a consumer, you may have legal rights under applicable

national legislation governing the sale of consumer goods;

those rights are not affected by this guarantee.

Customer service at Jaeger-LeCoultre

The movement of a mechanical watch requires regular

maintenance (servicing, lubrication, etc.) to ensure a long

operating life. Should your watch need servicing or repairs, please

send it, together with its guarantee certiﬁcate, to the authorised

Jaeger-LeCoultre retailer who sold it to you.

Alternatively, you may send it to one of the ofﬁcial

Jaeger-LeCoultre Service Centres listed at the end of this booklet,

or to any authorised Jaeger-LeCoultre retailer of which a list is

available on the «www.jaeger-lecoultre.com» website.

Our ofﬁcial Service Centres employ watchmakers trained at the

Jaeger-LeCoultre Manufacture and possess the tools and parts

necessary to repair and maintain all Jaeger-LeCoultre watches

and clocks. In certain cases, especially for operations requiring

special tools and parts, the Service Centres will send your watch

to the Jaeger-LeCoultre Manufacture in Switzerland to have the

necessary work carried out.

In any case, or if you live in a country which is not indicated in

our lists, please do not hesitate to contact directly Manufacture

Jaeger-LeCoultre in Switzerland, Rue de la Golisse 8, 1347 Le

Sentier, telephone +41 21 845 02 02, fax +41 21 845 05 50,

which will inform you of the procedure to follow. We also invite

you to visit our website «www.jaeger-lecoultre.com» for an

updated list of ofﬁcial Jaeger-LeCoultre Service Centres.

International Guarantee

Master CoMpressor Diving Chronograph & gMt - English 8/9

The following LimitedWarranty applies to Jaeger-LeCoultre

products sold or presented for warranty repairs in the

United States of America and Canada only.

The manufacturer’s Limited Warranty applies only to

Jaeger-LeCoultre products purchased from authorised

Jaeger-LeCoultre retailers. In addition, all maintenance and

repair works must be carried out either by an authorised

Jaeger-LeCoultre retailer or by an ofﬁcial Jaeger-LeCoultre

Service Centre. If these conditions are not met, the

manufacturer’s Limited Warranty does not apply. For a list

of authorised Jaeger-LeCoultre retailers worldwide, please

contact Jaeger-LeCoultre or its Distributors.

Jaeger-LeCoultre watches

The terms and conditions of the Jaeger-LeCoultre

Limited Warranty

The following terms and conditions of the Jaeger-LeCoultre

Limited Warranty apply only to watches sold or presented

for warranty repairs in the United States of America and

Canada.

Your Jaeger-LeCoultre watch is guaranteed against all

manufacturing defects for two years from the date of

purchase, subject to the following conditions.

Any part found by our technical services to be defective as a

result of a manufacturing defect will be, at the sole discretion

of Jaeger-LeCoultre, repaired or replaced free of charge.

The Jaeger-LeCoultre Limited Warranty is valid only if the

warranty certiﬁcate enclosed with this booklet has been duly

completed, dated, stamped and signed by the authorised

Jaeger-LeCoultre retailer who sold your watch.

This Limited Warranty does not cover defects resulting

from accidents, mishandling or incorrect or abusive use (for

example, knocks, dents, crushing, excessive temperatures,

powerful magnetic ﬁelds), the use of or effect of using

batteries other than those designated by Jaeger-LeCoultre,

unauthorised alteration or repair or the consequences of

normal wear and ageing of the watch, the strap or the glass,

the loss of water resistance after two years after the date

of purchase if your watch is water-resistant, and any defect

resulting from the contact with water if your watch is not

water-resistant.

Jaeger-LeCoultre water-resistant watches may be identiﬁed by

the symbol engraved on the back.Their resistance is

guaranteed for two years from the date of purchase, provided

that the glass, the bezel, the back, the middle part and the

crown have not been damaged. It is essential to have the

water resistance checked by an authorised Jaeger-LeCoultre

retailer or an ofﬁcial Jaeger-LeCoultre Service Centre at least

once a year, and in any event, prior to any period of intensive

use. (Please refer to the operating instructions for further

details).

For quartz watches, this warranty does not cover the battery

life.

Except insofar as prohibited by applicable law, this Limited

Warranty shall be the exclusive manufacturer’s warranty.

Neither this Limited Warranty nor any other warranties,

whether express or implied, including, but not limited to,

any implied warranty of merchantability or of ﬁtness for any

particular purpose, shall extend beyond the period of two

years from the date of purchase.

The liability of Jaeger-LeCoultre is limited solely and

exclusively to repair or replacement under the terms and

conditions stated herein. Jaeger-LeCoultre shall not be

liable, by virtue of this Limited Warranty or otherwise, for

any loss or damage arising out of the use of or inability

to use this watch nor for any incidental or consequential

damages relating in any way to this watch. Some States,

Provinces and Territories do not allow limitations on how

long an implied warranty lasts or the exclusion or limitation

of incidental or consequential damages, so the above

limitations or exclusions may not apply to you.

This Limited Warranty grants you speciﬁc legal rights, in

addition to which you may have other legal rights which

vary from one Country, State, Province or Territory to

another.

Customer service at Jaeger-LeCoultre

The movement of a mechanical watch requires regular

maintenance (servicing, lubrication, etc.) to ensure a long

operating life. Should your watch need servicing or repairs,

please send it, together with its warranty certiﬁcate, to the

authorised Jaeger-LeCoultre retailer who sold it to you.

Alternatively, you may send it to one of the ofﬁcial Jaeger-

LeCoultre Service Centres listed at the end of this booklet,

or to any authorised Jaeger-LeCoultre retailer of which a list is

available on the «www.jaeger-lecoultre.com» website.

Our ofﬁcial Service Centres employ watchmakers trained at

the Jaeger-LeCoultre Manufacture and possess the tools and

parts necessary to repair and maintain all Jaeger-LeCoultre

watches and clocks.

In certain cases, especially for operations requiring special

tools and parts, the Service Centres will send your watch to

the Jaeger-LeCoultre Manufacture in Switzerland to have the

necessary work carried out.

In any case, or if you live in a country which is not indicated

in our lists, please do not hesitate to contact directly

Manufacture Jaeger-LeCoultre in Switzerland, Rue de la

Golisse 8, 1347 Le Sentier, telephone +41 21 845 02 02,

fax +41 21 845 05 50, which will inform you of the

procedure to follow. We also invite you to visit our website

«www.jaeger-lecoultre.com» for an updated list of ofﬁcial

Jaeger-LeCoultre Service Centres.

Limited Warranty

Master CoMpressor Diving Chronograph & gMt - English 9/9

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Jaeger-leCoultre Betrachten Handbücher

Jaeger-leCoultre

Jaeger-leCoultre AMVOX2 DBS Transponder Bedienungsanleitung

Jaeger-leCoultre

Jaeger-leCoultre REVERSO CLASSIC DUETTO Bedienungsanleitung

Jaeger-leCoultre

Jaeger-leCoultre REVERSO CLASSIC MEDIUM THIN Bedienungsanleitung

Jaeger-leCoultre

Jaeger-leCoultre Watch Bedienungsanleitung

Jaeger-leCoultre

Jaeger-leCoultre DUOMETRE Q6062420 Bedienungsanleitung

Jaeger-leCoultre

Jaeger-leCoultre Reverso Classic Small Duetto Bedienungsanleitung

Jaeger-leCoultre

Jaeger-leCoultre Master Compressor Diving Alarm Navy Seals Bedienungsanleitung

Jaeger-leCoultre

Jaeger-leCoultre REVERSO ONE Bedienungsanleitung

Jaeger-leCoultre

Jaeger-leCoultre Q2662530 Bedienungsanleitung

Jaeger-leCoultre

Jaeger-leCoultre 868 Bedienungsanleitung

Jaeger-leCoultre

Jaeger-leCoultre Master Ultra Thin Bedienungsanleitung

Jaeger-leCoultre

Jaeger-leCoultre Master Tourbillon Bedienungsanleitung

Jaeger-leCoultre

Jaeger-leCoultre Master CoMpressor extreMe World Chronograph Bedienungsanleitung

Jaeger-leCoultre

Jaeger-leCoultre Polaris Mariner Bedienungsanleitung

Jaeger-leCoultre

Jaeger-leCoultre Master Compressor Geographic Bedienungsanleitung

Jaeger-leCoultre

Jaeger-leCoultre Deep Sea Bedienungsanleitung

Jaeger-leCoultre

Jaeger-leCoultre Reverso Squadra Bedienungsanleitung

Jaeger-leCoultre

Jaeger-leCoultre La Rose Bedienungsanleitung

Jaeger-leCoultre

Jaeger-leCoultre 382 Bedienungsanleitung

Jaeger-leCoultre

Jaeger-leCoultre Polaris Geographic WT Bedienungsanleitung

Jaeger-leCoultre

Jaeger-leCoultre Master Ultra Thin Date Bedienungsanleitung

Jaeger-leCoultre

Jaeger-leCoultre Grande Reverso Calendar Bedienungsanleitung

Jaeger-leCoultre

Jaeger-leCoultre HYBRIS MECHANICA CALIBRE 184 Bedienungsanleitung

Jaeger-leCoultre

Jaeger-leCoultre Grande Reverso 976 Bedienungsanleitung

Beliebte Betrachten Handbücher anderer Marken

Pandora

Pandora WATCH2 Bedienungsanleitung

Casio

Casio QW-4343 Bedienungsanleitung

Suunto

Suunto X6 Bedienungsanleitung

Seiko

Seiko N830 Bedienungsanleitung

MotionX

MotionX 365 Bedienungsanleitung

Garmin

Garmin VENU SQ 2 Bedienungsanleitung

QCY

QCY Watch GTC Bedienungsanleitung

Canyon

Canyon Cindy CNE-KW41WP Bedienungsanleitung

Esq

Esq Watches Installationsanleitung

Crane

Crane AA5-CDSM-3A Bedienungsanleitung

Timex

Timex W-214 Bedienungsanleitung

DETOMASO

DETOMASO MATERA Bedienungsanleitung

Geemarc

Geemarc Watch N Shake Bedienungsanleitung

LORUS

LORUS W590 Bedienungsanleitung

STENLILLE

STENLILLE Actío Bedienungsanleitung

Casio

Casio 5594 Bedienungsanleitung

Sinn

Sinn HUNTER'S WATCH 3. Edition Bedienungsanleitung

Slazenger

Slazenger SLZ800 Bedienungsanleitung