JamHub Tracker MT16 Bedienungsanleitung

1
TM
© 2014 JamHub Corp. All Rights Reserved.
P.O. Box 482 Whitinsville, MA | www.JamHub.com

2
Tracker MT16™ — User Guide
© 2014 JamHub Corp. All rights reserved. Product features, specications, system requirements,
and availability are subject to change without notice. Patents Pending.
TABLE OF CONTENTS
WELCOME 4
INTRODUCTION 4
Safety Precautions 4
Electrical Interference 4
Register Your Tracker MT16 4
Update Your Tracker MT16 4
FCC Warning 5
Declaration of Conformity 5
WHAT’S IN THE BOX? 6
Connections 6
Lights 7
Buttons 7
POWER 8
Powering Your Tracker MT16 8
TRACKER CONNECTIONS 8
Connecting Your Tracker MT16 8
ON BOARD INPUTS 8
Your Tracker MT16 has 8 Built-in Mono Inputs 8
Why a Half Insert? 9
Connecting Your Tracker MT16 to a JamHub Studio 10
Using the Tracker MT16 Breakout Cable 11
SAVE THE MUSIC 11
Insert Your SD Card 11
Formatting Your SD Card 11

3
RECORDING 12
Preparing to Record 12
Arming Channels 12
Select Your Channel Mapping Option 12
Record Modes - Split or Combined 12
Sample Rate - 44.1kHz, 48kHz, 96kHz 13
Audio Formats - WAV, or MP3 13
Record - ON/OFF 14
Naming Your Files 14
Recording 15
REVIEWING YOUR RECORDINGS 16
How to Listen to a Recording 16
CONNECTING TO THE WEB 16
How to Set Up Your Wireless Network - WiFi 16
What is BandLab™? 17
How to Link to Your BandLab™ Account 17
BandLab™ Cloud 17
Ethernet 10/100 Megabits Per Second (Mbps) 18
Status 18
STORAGE 19
To Reformat Your SD Card 19
To Update Your Tracker MT16 19
To Restore Factory Defaults 19
Troubleshooting 19
Warranty 20

4
Tracker MT16™ — User Guide
© 2014 JamHub Corp. All rights reserved. Product features, specications, system requirements,
and availability are subject to change without notice. Patents Pending.
INTRODUCTION
This guide is intended to get you up and recording with your new JamHub Tracker MT16.
To get the most out of your experience, please read the full manual thoroughly.
If this copy is lost, a copy of the manual can always be downloaded at www.JamHub.
com. Please direct any support requests to support@JamHub.com.
Safety Precautions
Do not let your Tracker MT16 become submerged in water, or otherwise get wet.
Do not expose your Tracker MT16 to extremes of temperature, such as in the freezer
or near an open ame. Use only the JamHub provided and approved AC adapter.
Opening the plastic housing will void the warranty, and expose the user to the
possibility of injury and electrical shock.
Electrical Interference
For your safety, the Tracker MT16 has been built with maximum protection against
external interference and the emission of internal electromagnetic radiation.
However, equipment or materials that are highly susceptible to interference or that
are prone to electromagnetic emissions should not be placed near the Tracker MT16
during operation, as it is still possible, though unlikely, for data to become corrupted.
Register Your Tracker MT16
Visit www.JamHub.com to register your Tracker MT16 today. Registration will ensure
that you’re kept up to date on all the latest soware so your unit is always on the
cutting edge of recording technology.
Update Your Tracker MT16
Visit www.JamHub.com/TrackerMT16 to nd the latest information about soware
and the most current online manual. Important: Update your Tracker MT16 as soon
as you open the box to access all your recorder’s features and xes.
Online user manuals are available in English, French, German,
Japanese and Spanish.
WELCOME
JamHub’s Tracker MT16 lets you capture the energy of your live performance, with
unparalleled quality for incredible recordings that let the music shine without being
bogged down by room noise and reection. Thanks for joining the JamHub family
with your purchase!

5
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation. Changes or modications not expressly
approved by the party responsible for compliance could void the user’s authority
to operate the equipment.
Model #: Tracker MT16
Operating Voltage: 5V DC
Power Consumption: 19W Max
NOTE: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment o and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
» Reorient or relocate the receiving antenna.
» Increase the separation between the equipment and receiver.
» Connect the equipment into an outlet on a circuit dierent from that
to which the receiver is connected.
» Consult the dealer or an experienced radio/TV technician for help.
Declaration of Conformity
JamHub hereby declares that this Tracker MT16™ Multitrack Recorder
is in compliance with the essential requirements and other relevant provisions
of Directive 1999/5/EC.

6
Tracker MT16™ — User Guide
© 2014 JamHub Corp. All rights reserved. Product features, specications, system requirements,
and availability are subject to change without notice. Patents Pending.
WHAT’S IN THE BOX?
» Tracker MT16
» Tracker MT16 Protective Case
» 16GB class 10 SD RAM Card
Connections
Your new Tracker MT16 has several options for connection…
Le Side:
1. Channels 1-6 – Built-in Mono Inputs
Right Side:
2. SD Card Slot – for all Class 10 SD cards
3. USB Slot – for transfering les and future
feature options.
4. Channels 7-8 – Built-in Mono Inputs
Back:
5. Ethernet Port 10/100 – high-speed internet
access for upload and download
6. DC Adapter Input – for use with the
included 5V DC adapter
7. JamHub Connect Cable Port – to plug
your Tracker MT16 directly into your
JamHub studio
Front:
8. ⅛” Headphone Jack – for instant playback
of individual tracks
» 5V DC Adaptor
» JamHub Connect Cable
» Quick Start Guide
14
2 3
75 6 8

7
Lights
Above Display Lights:
9. PWR - Your Tracker MT16 is powered
on with proper line voltage and ready
for use.
10. LINK – Network connectivity has been
successfully established and you are ready
to upload or download data.
11. ACT – Displays real-time data packet activity
in and out of your Tracker MT16.
Buttons
Below Display Lights:
12. ARMED – Record mode is set to on and all
selected tracks will be recorded once the
button is pressed.
13. REC – You are capturing sound!
14. CLIP – Audio is beyond appropriate
levels on one or more channels and one
or more channels will need to be lowered
at the source.
Note: Any single channel will set the clip light
o letting you know that a channel is clipping
(distorting the sound) before it gets to the
Tracker MT16 inputs. Lower the level at the
source until the clip light no longer ashes.
15. Move back one level in the menu. Hold down
for 2 seconds to go back to the top menu.
16. Select your current menu option and start a
new recording when armed to record. Hold
for 3 seconds to save some selected menu
functions.
17. Move up the menu or character hierarchy
18. Move down the menu or character hierarchy
9 10 11
18171615
12 13 14

8
Tracker MT16™ — User Guide
© 2014 JamHub Corp. All rights reserved. Product features, specications, system requirements,
and availability are subject to change without notice. Patents Pending.
POWER
Powering Your Tracker MT16
Plug your Tracker MT16 into the wall using the provided 5V DC Adapter. When your
Tracker MT16 is powered on, the PWR light will turn blue and the LCD will display,
Initializing, please wait… Your Tracker MT16 is a fully functioning UNIX computer,
so it will take a moment to boot up. Once the device is ready to go, you will see the
RECORD menu.
TRACKER CONNECTIONS
Connecting Your Tracker MT16
Your Tracker MT16 is designed to connect to a variety of devices, and can be hooked
up in 3 ways: using the built-in inputs, using the JamHub Tracker MT16 Breakout
Cable (sold separately), and using the included JamHub Connect cable.
Connect your Tracker MT16 directly to any mixer using the direct out, patch, or Insert
Jack. The Insert Jack is a specially designed jack for the send and return of eects
loops: rarely used but highly prized space on a mixer.
ON BOARD INPUTS
Your Tracker MT16 has 8 Built-in Mono Inputs
These specially designed jacks will allow you to connect your recorder directly
to a mixer through the insert jacks, or to get creative.
To connect to a mixer’s insert jacks, run a stereo cable from your Tracker MT16’s
on board inputs to the insert jack. This will give you clean post-trim, pre-fader audio
without aecting the signal on your mixer.
If you would like to connect directly to your Tracker MT16 without using insert jacks,
use a mono cable and only insert it half way into the jack. This will allow you to feed
some instruments and signal paths directly into your recorder when you need to.

9
Why a Half Insert?
Insert Jack signals have 3 components: a Send, a Return, and a Ground. If you fully
insert a mono cable, the lack of a Return will cause the signal to ground out. By using
the Half Insert technique, you will ensure that only the Send continues through the
mixer and you will not shut o the channel strip. If the Channel stops making sound
in your mixer, you have fully inserted the cable. Simply adjust back to a half-insert
connection (see below).
Full Insert
Half Insert

10
Tracker MT16™ — User Guide
© 2014 JamHub Corp. All rights reserved. Product features, specications, system requirements,
and availability are subject to change without notice. Patents Pending.
Connecting Your Tracker MT16 to a JamHub Studio
Your Tracker MT16 comes with a JamHub Connect cable to connect to any JamHub
studio. Simply plug the JamHub Connect cable into the JamHub Connect port on the
back of your Tracker MT16, and plug the other side into any of the SoleMix™ remote
ports on the back of your JamHub studio.
When recording from a JamHub studio, it is important to note that the Tracker MT16
will be recording up to 7 stereo channels of live audio, and that the microphone and
instrument inputs on each SoleMix section are summed before being recorded.
So if you have a guitar and a microphone plugged into Section 1 (blue) of your
JamHub studio, the Tracker MT16 will record these as 1 stereo signal, rather than
2 separate audio sources. The global eects (the FX bus) in your JamHub studio will
be recorded in a separate stereo channel should you want it during postproduction.
Andere Handbücher für Tracker MT16
2
Inhaltsverzeichnis
Andere JamHub Aufnahmegeräte Handbücher
Beliebte Aufnahmegeräte Handbücher anderer Marken

Strymon
Strymon NIGHTSKY Bedienungsanleitung

Mitsubishi Electric
Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Bedienungsanleitung

Tews Technologies
Tews Technologies TPMC465 Bedienungsanleitung

Honeywell
Honeywell Excel 50 Bedienungsanleitung

SeaLevel
SeaLevel COMM+8.LPCI Bedienungsanleitung

Arturia
Arturia AUDIOFUSE STUDIO Bedienungsanleitung











