Janam Xt series Bedienungsanleitung

022613XTFSQSG2

Technology at Work.

XT Series

Quick Start Guide

™

Janam Technologies LLCPage 1

XT Series Quick Start Guide

XT Series, Janam and the Janam logo are trademarks of Janam Technologies LLC. Other product and brand names

may be trademarks or registered trademarks of their respective owners.

Janam Technologies LLC assumes no responsibility for any damage or loss resulting from the use of this guide.

Janam Technologies LLC assumes no responsibility for any loss or claims by third parties which may arise through

the use of this product. Janam Technologies LLC assumes no responsibility for any damage or loss caused by

deletion of data as a result of malfunction, dead battery or repairs. To protect against data loss, be sure to make

backup copies (on other media) of all important data.

Follow all usage, charging and maintenance guidelines in the Product User Guide. If you have questions, contact

Janam. For a copy of the Product User Guide, visit www.janam.com.

Important: Please read the End User License Agreement for this product before using the device or the

accompanying software program(s). Using the device or any part of the software indicates that you accept the

terms of the End User License Agreement.

Content and Additional Resources

XT Series Quick Start GuidePage 2

To help you get started with your XT Series mobile computer, this guide features:

-Hardware Overview

-Getting Started

A. Install the Battery

B. Charge the Battery

C. Attach the Handstrap

D. Remove the Battery

E. Access the SIM Card Slot and microSD Card Slot

Contents of this guide are subject to change. For the most current version of this guide and additional

product details, visit www.janam.com.

For software updates and information, visit www.microsoft.com.

Hardware Overview

Page 3 XT Series Quick Start Guide

18 3

19 2

1. Power Button

2. Enter Key

3. Back Space Key

4. Micro USB Port

5. Phone Disconnect Key

6. Headset with Microphone

7. Volume Control

8. Right Trigger

9. LCD

10. NoticationLEDs

11. Indicator LED

12. Scan Window

13. Receiver

14. Left Trigger

15. Push-to-Talk Button

16. Scan Trigger

17. Phone Connect Key

18. Shift Key

19. Microphone

20. Yellow Function Key

21. Connector

22. Blue Function Key

(Numeric keypad only)

Numeric KeypadQWERTY Keypad

19 20 21

12 12

15 15

Hardware Overview

Janam Technologies LLCPage 4

Battery Compartment

1. Battery

2. Battery Lock Switch

3. Finger Lift Groove

4. Speaker

5. Handstrap Retainer

6. Scan Window

7. Lanyard Connector

8. Stylus

9. Camera or IrDA Window

10. Stylus Slot

11. Handstrap Bar

12. Media Card Compartment Cover

13. microSD Card Cover/Slot

14. SIM Card Cover/Slot

Getting Started

Page 5 XT Series Quick Start Guide

Important Note: The main (removable) battery charges the internal backup battery with or without an external

power source. When discharged, the backup battery requires approx. 1.5 hours to recharge.

Caution: All user data will be lost if the main battery is removed before the internal backup battery is properly

charged. It is, therefore, recommended you check that the backup battery capacity is at 100% prior to removing the

main battery. To do this access the Power Application located in Start->Settings-> Power. It is also recommended

thatyourstsuspendthedevicepriortoremovingthemainbattery.

A. INSTALL THE BATTERY

1. Place the plastic tabs on the base of the battery in the notches at the bottom of the battery compartment.

2. Press the top of the battery to snap in place.

3. Push the battery lock switch to the lock position by sliding it to the left.

B. CHARGE THE BATTERY

To charge the battery using the USB AC Adapter Kit:

1. Slide adapter plug onto the AC adapter housing.

2. Insert the USB end of the USB cable into the USB port on the AC adapter housing.

3. Insert the micro USB end of the USB cable into the micro USB port on the XT Series unit.

4. Plug in the AC Adapter. Use only easily accessible wall sockets that are easily reached with the length of supplied power cable.

To charge the battery using the USB Syncing/Charging Cable:

1. Connect the power supply to the cable accessory, then connect the line cord to the power supply.

2. Connect snap-on end of cable accessory to bottom of XT Series unit making sure the Janam logo on the

connector faces front.

3. Plug in the power supply. Use only easily accessible wall sockets that are easily reached with the length of supplied power cable.

To charge the battery using a Cradle Kit:

1. Connect the power supply to the cradle, then connect the line cord to the power supply.

2. Plug in the power supply. Use only easily accessible wall sockets that are easily reached with the length of supplied power cable.

Getting Started (continued)

XT Series Quick Start GuidePage 6

Charging the battery using a Cradle Kit continued:

3. Placethedeviceincradle.TheLEDonthedevicewillilluminatetoconrmconnection.

4. The battery is fully charged in approximately 2 hours.

5. To charge a battery in the spare battery well, insert the battery into the well top down (connectors

on the battery should face downward and to the back of the cradle) and gently press down. The LED

lightonthecradlewillilluminatetoconrmconnection.

C. ATTACH THE HANDSTRAP

1. Insert plastic fastener on handstrap into the handstrap retainer

face down as shown in diagram. It will click into place.

2. Extend other end of handstrap toward base of XT Series

unit (rough side of Velcro should be facing up). Feed

through the handstrap bar as shown in diagram.

3. Pull handstrap through handstrap bar and fasten Velcro

to close the strap. Fit strap and secure device to user’s

hand by adjusting Velcro as needed.

D. REMOVE THE BATTERY

1. Push the battery lock switch to the unlock position by sliding it to the right.

2. Liftthebatteryattheupperrightcorner(ngerliftgroovemarkedbyanarrow).

E. ACCESS SIM CARD SLOT AND MICRO SD CARD SLOT

1. After removing the battery, lift the media card compartment cover using notch at the top (it drops

down to open).

2. To access the SIM card slot, slide silver SIM card cover to the left and lift open.

3. To access the microSD card slot, slide silver microSD card cover to the left and lift open.

Regulatory Information

XT Series Quick Start GuidePage 7

The CE Mark on the product indicates that the system has been tested to and conforms with the provisions

noted within the 2004/108/EEC Electromagnetic Compatibility Directive.

For further information, please contact:

Janam Technologies LLC

100 Crossways Park West, Suite 105

Woodbury, NY 11797

Janam Technologies shall not be liable for use of our product with equipment (i.e., power supplies, personal

computers, etc.) that is not CE marked and does not comply with the Low Voltage Directive.

Only use Janam approved and UL listed batteries and charging accessories.

FCC and Canadian Compliance

XT Series mobile computers meet or exceed all applicable standards and have been manufactured to the highest

levelofquality.ToseethespeciclabelsassociatedwithRFterminalscongurations,visitwww.janam.com.

Warning:Changesormodicationstothisunitnotexpresslyapprovedbythepartyresponsibleforcompliancecould

void the user authority to operate the equipment.

RF, Regulatory and Safety Approvals

XT Series Batch Terminal

Parameter Specication

U.S.A. FCC Part 15 Subpart B: 2011

UL 60950/UL 1604 FOR CLASS I, DIV 2, Groups A, B, C & D

Europe EN55022:2010 / EN55024:2010

Australia AS/NZS CISPR 22:2009+A1:2010

XT Series Quick Start GuidePage 8

XT85 Series RF Terminals with WLAN and Bluetooth

Parameter Specication

U.S.A. FCC Part 15B, 15C and 15E:2011;TCBReview, OET65 SAR & DFS/TPC

UL 60950/UL 1604 FOR CLASS I, DIV 2, Groups A, B, C & D

Canada RSS-210:2010 ISSUE 8 (2010-12), ICES-003: 2012 ISSUE 5(2012-08)

Europe EN300328 V1.7.1:2006, EN301893 V1.6.1 (2011-11), EN 300 440-2 V1.4.1,

EN301489-1/-17, EN60950: 2006/A12:2011, EN62311 SAR: 2008

Australia AS/NZS 4268:2012, AS/NZS CISPR 22:2009+A1:2010

XT85 Series RF Terminals with WWAN (Phone)

Parameter Specication

U.S.A. FCC Part 22:2011/24:2011;TCBReview, OET65 SAR & DFS/TPC

UL 60950/UL 1604 FOR CLASS I, DIV 2, Groups A, B, C & D

Canada RSS-210:2010 ISSUE 8 (2010-12), RSS-132:2006 ISSUE (2005-09),

RSS-133:2009 ISSUE 5(2009-02), ICES-003: 2012 ISSUE 5(2012-08)

Europe EN301 511:V9.0.2:2003, EN301908-1:V5.2.1(2011-05),EN 300 440-2 V1.4.1, EN301489-1

(V1.9.2 (2011-09)/-7(V1.3.1(2005-11))/-24 (V1.5.1:2010)/

-3 (V1.4.1:2002), EN60950: 2006/A12:2011, EN62311 SAR: 2008,

EN50360:2001+A1:2012, EN62209:2010

XT85 Series RF Terminals with WWAN, WLAN and Bluetooth

Parameter Specication

U.S.A. FCC Part 15B, 15C and 15E:2011, FCC Part 22:2011/24:2011; TCBReview, OET65 SAR &

DFS/TPC; UL 60950/UL 1604 FOR CLASS I, DIV 2, Groups A, B, C & D

Canada RSS-210:2010 ISSUE 8 (2010-12), RSS-132:2006 ISSUE (2005-09),

RSS-133:2009 ISSUE 5(2009-02), ICES-003: 2012 ISSUE 5(2012-08)

Europe EN300328 V1.7.1:2006,EN301893 V1.6.1 (2011-11),EN301908-1:V5.2.1(2011-05)

EN301893 V1.6.1(2011-11),EN 300 440-2 V1.4.1,EN301 489-1(V1.9.2(2011-09))/-7

(V1.3.1(2005-11))/-7(V2.2.1(2012-09))/-24(V1.5.1:2010), EN62209:2010, EN60950: 2006

A12:2011, EN62311 SAR: 2008, EN50360:2001+A1:2012,

Australia AS/NZS 4268:2012

XT Series Quick Start GuidePage 9

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this

device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorientorrelocatethereceivingantenna.

•Increasetheseparationbetweentheequipmentandreceiver.

•Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiverisconnected.

•Consultthedealeroranexperiencedradio/TVtechnicianforhelp.

If necessary, the user should consult the dealer or an experienced radio/television technician for additional

suggestions.Theusermayndthefollowingbooklethelpful:“SomethingaboutInterference.”Thisisavailable

atFCClocalregionalofces.Ourcompanyisnotresponsibleforanyradioortelevisioninterferencecausedby

unauthorizedmodicationsofthisequipmentorthesubstitutionorattachmentofconnectivecablesandequipment

otherthanthosespeciedbyourcompany.Thecorrectionistheresponsibilityoftheuser.Useonlyshieldeddata

cables with this system.

This device and its antenna must not be co-located or operating in conjunction with any other antenna or

transmitter. To maintain compliance with the FCC RF exposure guidelines for body-worn operation, do not use

accessoriesthatcontainmetalliccomponentsotherthanspeciedbythemanufacturer.

Inhaltsverzeichnis

Andere Janam Handheld Handbücher

Janam

Janam XM60+ Bedienungsanleitung

Janam

Janam XP20 Bedienungsanleitung

Janam

Janam XG100 Bedienungsanleitung

Janam

Janam XM2-RFID Bedienungsanleitung

Janam

Janam XT2 Bedienungsanleitung

Janam

Janam XG3 Series Bedienungsanleitung

Janam

Janam XP series Bedienungsanleitung

Janam

Janam XM75WA Bedienungsanleitung

Janam

Janam XT100 Bedienungsanleitung

Janam

Janam XM66 Bedienungsanleitung

Janam

Janam XT2WB Bedienungsanleitung

Janam

Janam XT3 Series Bedienungsanleitung

Janam

Janam XM series Bedienungsanleitung

Janam

Janam XG100WM Series Bedienungsanleitung

Janam

Janam XG200 Series Bedienungsanleitung

Janam

Janam XG3 Series Bedienungsanleitung

Janam

Janam XM60 Bedienungsanleitung

Janam

Janam XG100CE Series Bedienungsanleitung

Janam

Janam XT2+ Bedienungsanleitung

Janam

Janam XG3 Series Bedienungsanleitung

Janam

Janam AI4100 Bedienungsanleitung

Janam

Janam XM5 Bedienungsanleitung

Janam

Janam XM7 5 + Series Bedienungsanleitung

Beliebte Handheld Handbücher anderer Marken

Honeywell

Honeywell Dolphin 9900 Bedienungsanleitung

Honeywell

Honeywell CN75 Bedienungsanleitung

MiTAC

MiTAC Mio 168 Bedienungsanleitung

Wasp

Wasp WDT92 Bedienungsanleitung

Texas Instruments

Texas Instruments TI-Nspire Bedienungsanleitung

AXEM Technology

AXEM Technology MBS Bedienungsanleitung

Armstrong

Armstrong Brain Wave Montageanleitung

Unitech

Unitech TB128 Bedienungsanleitung

Symbol

Symbol MC9000-G Installations- und Betriebshandbuch

Unitech

Unitech HT1 1D Batch Bedienungsanleitung

Ingenico

Ingenico IWL220 GPRS Bedienungsanleitung

Intermec

Intermec CK61 Bedienungsanleitung

Symbol

Symbol c2000 Bedienungsanleitung

Symbol

Symbol MC18 Installations- und Betriebshandbuch

Acer

Acer n20 Bedienungsanleitung

Intermec

Intermec CK61 Bedienungsanleitung

Docomo

Docomo F-04H Bedienungsanleitung

Toshiba

Toshiba e350 Series Bedienungsanleitung

Janam xt series Bedienungsanleitung

Beliebte Handheld Handbücher anderer Marken