4
ProData II
Instructions for use
Please read the operating manual included in the delivery
as well as all other publications that must be referred
to for working with this product (in particular for
the installation, operation or maintenance).
Follow all safety regulations and warning information.
If you do not follow the information, it can result in bodily
injury and/or damage to the product.
Any unauthorised changes or use of this device, which
go beyond the mechanical, electrical or otherwise stated
operating limitations, can result in bodily injury or/and
damage to the product.
Any such unauthorised changes constitute "misuse"
and/or "negligence" in terms of the warranty for
the product and, therefore, invalidate the warranty for
covering any potential damage that result.
This device is to be operated and maintained exclusively
by specialised personnel.
Specialised personnel are persons who, based on their
respective training and experience, are qualified to
recognise risks and prevent potential dangers that can be
caused by the operation or maintenance of the device.
cIf the device is not operated according
to the operating manual, protection is
no longer ensured and hazards can
be presented by the device.
mConductors made from single wires must
be fitted with wire-end ferrules.
mOnly pluggable screw terminals with
the same number of poles and the same
type of construction are permitted to
be connected together.
Additional legal and safety regulations required for
the respective application are to be followed when using
the device.
