Jatontec JT6300D Bedienungsanleitung

Page 1 www.jatontec.com

JT6300D LTE Outdoor CPE

Administrator User Manual V1.0

Page 2 www.jatontec.com

PLEASE READ THESE SAFETY PRECAUTIONS!

RF Energy Health Hazard

The radio equipment described in this guide uses radio frequency transmitters. Although

the power level is low, the concentrated energy from a directional antenna may pose a

health hazard.

Do not allow people to come in close proximity to the front of the antenna while the transmitter is

operating.

Protection from Lightning

Before connecting this instrument to the power line, make sure that the voltage of the

power source matches the requirements of the instrument. The unit must be standards.

Disposal and Recycling Information

Pursuant to the WEEE EU Directive electronic and electrical waste must not be disposed of

with unsorted waste. Please contact your local recycling authority for disposal of this

product.

Reduction of Hazardous Substances

This CPE is compliant with the EU Registration, Evaluation, Authorization and Restriction of

Chemicals (REACH) Regulation (Regulation No 1907/2006/EC of the European Parliament

and of the Council) and the EU Restriction of Hazardous Substances (RoHS) Directive

(Directive 2002/95/EC of the European Parliament and of the Council).

Page 3 www.jatontec.com

Table of Contents

1. OVERVIEW................................................................................................................................5

USER INTERFACE SPECIFICATION...........................................................................................5

2. GETTING STARTED..................................................................................................................5

DEVICE LOGIC CONNECTION..................................................................................................6

INSTALLING MOUNTING BRACKETS..........................................................................................7

HEADER CONNECTION ..........................................................................................................7

2LED DISPLAY............................................................................................................................8

RF SIGNALADJUSTMENT ......................................................................................................8

3MANAGING CPE DEVICE.........................................................................................................9

WEB LOGIN.........................................................................................................................9

4LTE CONFIGURATION..............................................................................................................9

OVERVIEW...........................................................................................................................9

ND&S CONFIGURATION......................................................................................................11

PLMN SELECTION..............................................................................................................11

CELL SELECTION................................................................................................................12

PDN SETTING....................................................................................................................12

SIM CARD.........................................................................................................................13

ADVANCED.........................................................................................................................13

LTE SMS..........................................................................................................................14

COMMAND SHELL...............................................................................................................15

5NETWORK CONFIGURATION................................................................................................16

INTERNET ..........................................................................................................................16

LAN SETTING ....................................................................................................................17

VPNSETTING UNDER ROUTER MODE..................................................................................18

VPNSETTING UNDER L2 BRIDGE MODE..............................................................................20

L2 SERVICE UNDER L2 BRIDGE MODE.................................................................................20

QOSSETTING....................................................................................................................21

DDNS SETTING UNDER ROUTER MODE...............................................................................21

TRAFFIC CONTROL SETTING UNDER ROUTER MODE..............................................................22

6SECURITY CONFIGURATION ................................................................................................22

FIREWALL ..........................................................................................................................22

ALG..................................................................................................................................23

DEFENSE...........................................................................................................................24

ACCESS RESTRICTIONS ......................................................................................................25

7APPLICATIONS CONFIGURATION ........................................................................................26

PORT RANGE FORWARDING.................................................................................................26

PORT FORWARDING............................................................................................................26

Page 4 www.jatontec.com

DMZ.................................................................................................................................27

UPNP ...............................................................................................................................27

PORT TRIGGERING .............................................................................................................28

8MANAGEMENT.......................................................................................................................28

DEVICE MANAGEMENT........................................................................................................28

TR069..............................................................................................................................29

9MAINTENANCE.......................................................................................................................30

GENERAL...........................................................................................................................30

FIRMWARE UPGRADE..........................................................................................................31

CONFIG MANAGEMENT........................................................................................................31

PING .................................................................................................................................32

IPERF................................................................................................................................32

SYSTEM RESET..................................................................................................................33

10 STATUS...................................................................................................................................34

SYSTEM.............................................................................................................................34

NETWORK..........................................................................................................................35

LAN..................................................................................................................................36

11 FAQ AND TROUBLESHOOTING............................................................................................37

Page 5 www.jatontec.com

1. Overview

JATONTEC 6300D is highly advanced TD-LTE CAT7 outdoor data unit

specially designed to meet the most challenging demands of today’s high

speed wireless backhaul and fixed wireless access deployments by the 4G

service operators. The unit can support multiple TDD band operations.

Multiple operator network support can also be provisioned on the unit to allow

the deployment across entire country with different operators.

User Interface Specification

Model

Description & User Interface

JT6300D

- Panel antenna: 17dBi (2*2 MIMO CA), 13dBi (4*4 MIMO)

- 1 RJ45 10/100/1000M LAN Port

- PWR, SYS, SIM, LINK, ACT, and LTE (1-5) LEDs

- 48V/0.5A PoE supply, ODU Power <15 Watts

- Dimensions: 250 mm (L) ×250 mm (W) ×75 mm (D)

- Weight: <2.5 Kg

2. Getting Started

1) Packing list

Upon receiving the product, please unpack the product package carefully. Each product is shipped

with the following items:

Table 2-1 Packing List

Outdoor CPE Products

Quantity

ODU unit

PoE adapter

Power cord

Mounting brackets

PC Ethernet Cable

If you find any of the items is missing, please contact our local distributor immediately.

2) Unpacking the Equipment

Table 2-1 lists all the standard parts that are supplied in your LTE CPE Unit Installation Package.

Please take the time to unpack the package and check its contents against this list.

Page 6 www.jatontec.com

3) Installing the Equipment

Device Logic connection

For outdoor CPE product, it is suggested that the CPE device be installed in a shaded area to avoid

direct sun light exposure which may cause over heat in certain extreme weather condition.

To power on the device, the outdoor CPE must use a 48V PoE integrated DC power supply adapter.

The power adapters can operate in 100-240V AC range and therefore can be used in different country.

Once the device is powered up, the user should wait for about 1 minutes before the device becomes

operational. When the RF1 LED becomes blinking green, it indicates the system has completed the

startup procedure.

To connect PC, LAN switch or other type of IP device to the CPE product, the user should use SFTP

CAT5E Ethernet cable and connect to the appropriate LAN port. Once connected, the ETH LED

indicator should come on.

Page 7 www.jatontec.com

Installing Mounting brackets

Header Connection

Page 8 www.jatontec.com

2 LED Display

Type

LED

Function

Description

ODU

PWR

Power indicator

Solid green –Device is power on.

SYS

System run indicator

Solid green –Device is in normal operation.

SIM

SIM card indicator

Light is on –SIM card state is ready,

Blinking Green –SIM card is error.

LINK

LAN port status

Solid Green –LAN port is up.

ACT

LAN port status

Blinking Green –LAN data transmission.

(5LEDs)

RF Signal Strength

5 level signal strengths indication by 5 green

LEDs.

1st Green LED: -115dBm < RSRP

2nd Green LED: -115dBm <= RSRP < -105dBm

3rd Green LED: -105dBm <= RSRP < -95dBm

4th Green LED: -95dBm <= RSRP < -85dBm

5th Green LED: -85 <= RSRP

RF Signal Adjustment

After the CPE outdoor unit has installed, the direction of antenna’s azimuth and pitch angle needs to

adjust for the best signal strength. In near line of sight condition, the CPE will have the best signal

when the antenna is directly pointing the base station.

User can adjust the holder to change the direction and angle of the antenna while observing the RF

LED on the outdoor unit which indicates the signal strength.

Page 9 www.jatontec.com

3 Managing CPE Device

JT6300D is a user-friendly LTE CPE, and very easy to configure and setup. Subscribers can just

connect the device to their computer or home switch/router and the device is ready to provide Internet

Services.

WEB Login

It is a preferred to setup the CPE using a Web browser from a local PC connected to device LAN port.

The user should ensure that the connected PC have acquired IP address via DHCP from the device.

After IP connectivity is established between the PC and CPE device, the user may launch a Web

browser and specify http://10.1.1.1 in the address bar. A window will pop up requesting password.

Input the user or administrator login password and then click the “Log in” button. After successful log

on, the default home page will appear. Note the default user & administrator passwords are “user123”

and “admin123” respectively.

4 LTE Configuration

Overview

Once the user is logged in, the following window device status window will be prompted for viewing. It

contains both the system information, networking and device information configured for the device.

Page 10 www.jatontec.com

Inhaltsverzeichnis

Andere Jatontec Antenne Handbücher

Jatontec

Jatontec JT8500D Bedienungsanleitung

Beliebte Antenne Handbücher anderer Marken

Alfa Network

Alfa Network APA-L01 Bedienungsanleitung

Naval

Naval PR-422CA Bedienungsanleitung

Feig Electronic

Feig Electronic ID ISC.ANTH200/200 Series Bedienungsanleitung

TERK Technologies

TERK Technologies TV44 Bedienungsanleitung

Directive Systems & Engineering

Directive Systems & Engineering DSE2324LYRMK Bedienungsanleitung

HP J8999A Bedienungsanleitung

MobilSat

MobilSat MSP-S Bedienungsanleitung

Steren

Steren ANT-UHF 13 Bedienungsanleitung

Novatel

Novatel 600-G Bedienungsanleitung

Radio Shack

Radio Shack Amplified VHF/UHF/FM Indoor Antenna Bedienungsanleitung

TRENDnet

TRENDnet TEW-AO12O Bedienungsanleitung

Radio Shack

Radio Shack 15-1837 Bedienungsanleitung

CommScope

CommScope CMAX-OMFX-43M-I53 Bedienungsanleitung

Ramsey Electronics

Ramsey Electronics DAP25 Bedienungsanleitung

COBHAM

COBHAM SAILOR 800 VSAT Gebrauchs- und Pflegehandbuch

Trango Systems

Trango Systems AD900-9 Bedienungsanleitung

Steren

Steren ANT-100 Bedienungsanleitung

Proxim

Proxim 5054-PA-23 Bedienungsanleitung