Jaycar Electronics AR1840 Bedienungsanleitung

5.8 GHz Wireless

Audio/Video Sender

Contents

1. Package Content ………………………………1

2. Panel Control and Function ………………………………2

3. Setup Guide ……………………………… 4

4. Orient Transmitter/Receiver for optimal performance ……5

1. Package Content

Check to make sure that all units shown as below are enclosed. If

something missed, please contact your dealer.

1. 5.8GHz Transmitter x 1 2. 5.8GHz Receiver x 1

UHF: 433.92MHz

3. IR Cable LED x 1

4. Power Adapters (9V) x 2 5. Cable x 2

2. Panel Control and Function

5.8GHz

Transmitter

5.8GHz

Receiver

11A

10A

3A 18765

11B

10B

3B 18

EUROPE Type

USA Type

EUROPE Type(RCA to SCART)

USA Type(RCA to RCA)

Indicator lights show the channel it configured as.

2 – Channel selection button to find optimal reception.

3A – Remote control window sends IR rays, to remotely control

the source AV equipment.

3B – Remote control window receives IR rays from remote

controller.

4A – Directional 5.8GHz A/V antenna sends A/V signal from

source equipment.

4B – Directional 5.8GHz A/V antenna receives audio and video

signal.

5 – Power on/off switch.

6 – DC power input, connect to power supply. (9V).

7 – IR Mouse output, to remotely control source AV equipment.

8 – ID Code, the transmitter and receiver must to be configured

as the same ID Code.

9A – Video Jack, (yellow), input from source AV equipment.

9B – Video Jack, (yellow), output to TV.

10A– Audio Jack, Right (red), input from source AV equipment.

10B– Audio Jack, Right (red), output to TV.

11A– Audio Jack, Left (white), input from source AV equipment.

11B– Audio Jack, Left (white), output to TV.

1–

ID Code

1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

ID 1 ID 2 ID 3 ID 4

1 2 3 4

3. Setup Guide

To enjoy a life of wireless video and audio, just connect the

transmitter to any A/V source you like and connect the

receiver to a TV, monitor or speaker in another location.

NOTE: Make sure the ON/OFF switch is in the 「OFF」position before connection

1. Connect one end of the RCA

cable (or scart cable) to the

audio and video jacks, and

connect the other end to a

source device via its “AV

output”.

2. Connect the DC plug of the

adapter to the DC jack, and

connect the power supply to

an outlet.

3. Fix IR mouse next to or in

front of IR sensor of source

device, or alternatively

have transmitter facing

directly toward the source

device.

Transmitter

Receiver

1. Connect one end of the RCA

cable (or scart cable) to the

audio and video jacks and

connect the other end to a

TV (or monitor, speakers)

via its“AV input”.

2. Connect the DC plug of the

adapter to the DC jack, and

connect the power supply

to an outlet.

3. Keep the IR window

oriented toward front

when using your source

device remote controller.

Power

Supply

IR Mouse

AV Equipment

RCA Cable

(Or Scart Cable)

Remote

Controller

To TV

Power

Supply

RCA Cable

(Or Scart Cable)

Transmitter

Receiver

4. Orient Transmitter/Receiver for optimal performance

For optimal performance, the audio/video antenna should be

carefully oriented as described below. For maximum

transmitting range, try to minimise obstacles (e.g. your TV or

other electronics, large furniture) where between the transmitter

and receiver.

The system delivers high-quality audio and video by using

directional antenna, which must be oriented in the best ways.

The antenna are designed to be able to vertically and

horizontally pivot and rotate in almost any direction.

Orients the 5.8GHz A/V Antenna

In most situations, the flat-pitted face of the antenna on both

the transmitter and receiver should be facing one another and

perpendicular (at a right angle) to an imaginary line drawn

between the two units. Two examples are shown as Fig-1 and

Fig-2. Since all homes are different, for optimal reception,

additional slight pivots or rotations may be necessary. If the

transmitter and receiver are less than 10 feet apart, suggest that

the antenna are lying on their casings since the distance is

so short.

5.8GHz Antenna

Fig-2

5.8GHz Antenna

Transmitter

5.8GHz Antenna

Fig-1

Transmitter Receiver

5.8GHz Antenna

Receiver

Inhaltsverzeichnis

Andere Jaycar Electronics Extender Handbücher

Jaycar Electronics

Jaycar Electronics AC1736 Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Marmitek

Marmitek MegaView70 Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung