Jaycar Electronics QC3624 Bedienungsanleitung

Wireless Video Door Phone

Installation and Operating Instructions

Model: QC3624

PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE USING THIS PRODUCT

AND KEEP THIS MANUAL FOR FUTURE REFERENCE.

CONTENTS

INTRODUCTION .............................................................................................. 2

IMPORTANT SAFETY PRECAUTIONS.....................................................................2

KNOWING YOUR DEVICES ............................................................................ 3

DOOR UNIT..............................................................................................................3

ANSWERING UNIT...................................................................................................

..................................................................................

KNOWING THE SCREEN ICONS.............................................................................5

MOUNTING THE DOOR UNIT 7

KNOWING THE MAIN MENU......................................................................... 10

ADVANCED SETTINGS................................................................................. 11

CAMERA SETUP....................................................................................................11

RECORDER SETUP...............................................................................................12

SETUP MASKING AREA...................................................................................14

EVENT LIST ...........................................................................................................15

DATE ................................................................................................................15

TIME .................................................................................................................17

FILE ..................................................................................................................19

SYSTEM SETUP ....................................................................................................20

ALARM BUZZER ....................................................................................................22

PAN TILT ZOOM .....................................................................................................

..................................................................................

...........................................................................

SCAN ACTIVATED CAMERAS................................................................................24

MEMORY CARD OVERWRITE ...............................................................................25

PC PLAYBACK SOFTWARE.......................................................................... 26

SEC24 MEDIA PLAYER INTRODUTION.........................................................................26

SOFTWARE INSTALLATION 27

PLAYBACK RECORDED FILE(S) 29

ADDING ADDITIONAL CCTV CAMERA .................................................................31

PRODUCT SPECIFICATION .......................................................................... 32

STORAGE MEDIA MANAGEMENT.........................................................................32

WHAT YOU GET

• Digital Wireless 7" Touch LCD Answering Receiver X1

• Digital Wireless Door Unit X1

• 12V/1A Power Adaptor for the Door Unit X1

• 5V/1A Power Adaptor for the Answering Receiver X1

• DC Power Cable X1

• Unlock Connection Cable X2

• Water Resistant Plug X2

• Mounting Bracket X1

• Mounting Pack X1

• Anti-Thief Screwdriver X1

• PC Player Software CD X1

INTRODUCTION

IMPORTANT SAFETY PRECAUTIONS

Damages caused by non-compliance with this operating manual will void the warranty! We will

not assume any liability for damages to items or persons caused by improper handling or non-

compliance with the safety notices! Any warranty claim will be null and void in such cases.

1. Do not drop, puncture or disassemble the camera; otherwise the warranty will be voided.

2. Avoid all contact with water, and dry hands before using.

3. Never tug on the power cords. Use the plug to unplug it from the wall outlet.

4. Do not expose the camera to high temperature or leave it in direct sunlight. Doing so may

damage the camera or cause camera temporary malfunction.

5. Use the devices with care. Avoid pressing hard on the camera body.

6. For your own safety, avoid using the camera or power off the camera when there is a storm or

lightning.

7. Remove the power adapter during long periods between usages.

8. Use only the accessories and power adapters supplied by the manufacturer.

9. To meet the regulations pertaining to parental responsibility, keep the devices out of the reach

of infants.

10. Check power cables, do not get crushed or damaged by sharp edges whenever the devices are

in operation.

PLEASE READ BEFORE YOU START

Always use discretion when installing CCTV equipment, especially when there is perceived

policy. Enquire relevant local regulations applicable to the lawful installation of video recording/

surveillance. Third party consent may be required.

WIRELESS DEVICES OPERATING RANGE

Ensure the signal reception viewed from the wireless camera(s) is the best possible reception

between the camera(s) and the Wi-Fi router. If necessary, reduce the distance between the

camera(s) and the Wi-Fi router to improve overall system performance. Wireless Color Camera

Recordable CCTV Kit operating on a secure digital 2.4GHz frequency which could greatly

reduce interference from product such as wireless routers, cordless phones or microwave

ovens.

CAUTION

•This product is designed with built-in high sensitivity microphone. Please keep the door unit away from

the answering unit at least 3 to 5 meters, otherwise continuously howling will occur. Please volume

down if short distance use is needed.

•Do not insert or remove SD Card when the system is in operation. This may cause system malfunction.

KNOWING YOUR DEVICES

DOOR UNIT

Item Function

1 Antenna

2 Speaker

3IRLED

4EDS

5 Call Button

6 Microphone

7 Pairing Key

8 Battery Compartment

Item Function

9 Dry Contact Output A

10 Dry Contact Input

(for DC Power Cable)

11 Dry Contact Output B

12 Power Adaptor

13 DC Power Cable

14 Unlock Connection Cable

Note:

1. The door unit can operate in Battery mode or DC mode. In Battery mode, it requires 6 x

AA batteries to operate (which are not included).

2. Low battery may cause system malfunction. Please replace battery in time.

ANSWERING UNIT

Item Function

1 Wirelless Signal Indicator

2 Power Indicator

3 Microphone

4Antenna

5 Power Button

6Speaker

Item Function

7 Flip-out Stand

8 Micro SD Slot

Reset

AV Out Jack

Adaptor Plug

Note:

When using A/V cable connecting the receiver to TV, the display on receiver will not be

available and answering visitor function will also be turned off until disconnecting A/V cable

from the receiver.

KNOWING THE SCREEN ICONS

Item Function

1 Channel Number

2 Active Voice Channel

3 Wireless Signal Strength

4 Camera Battery Capacity

5 Channel Status

6 Recording Countdown

Indicator

7 Receiver Battery Status

8 System Time Information

9 Record Status

System Tray Icon

Icon image

Name

Function

System Tray

System Tray-Hide & display tray icon

Channel Display Press to switch display channel

Two Way Audio Press to start/stop communication.

Door Control Press to open the door (Dry Contact B)

Gate Control Press to open the gate (Dry Contact A)

Volume Press to adjust receiver volume

Record

Press to start/stop recording

Setup Press to enter setup menu

Note:

1. Record function cannot be stopped unless the

countdown OSD completes

3. Users cannot switch channel to another camera

when recording function is active.

CAUTION

．By default, the monitor screen will be ALWAYS ON. If you want to save power

consumption, please setup the idle mode in 'System Setup' sub-menu. ('System Setup' >

'Power Saving' > 5Minutes/10Minutes/ALWAYS ON).

2. Receiver starts to record for 1 minute when a visitor

presses the doorbell. If users answer the visitor, one

more minute will be recorded.

MOUNTING THE DOOR UNIT

Installation via Battery Power Mode

1. First insert six AA batteries (not included) according to the

polarity (+/-) indicator on the door unit.

2. Optional: The door unit has been paired to the receiver by

factory default. If you need to pair the door unit to the system

again, please go to "Advanced Settings / Camera Setup" for

more details.

3. Door unit is now ready for use.

Step1

Use the sunshield as a template

to drill 4 suitable holes and attach

the sunshield to the wall with the

screws and wall plugs (supplied).

Step2

Install the back panel (with batteries

inserted) to the door unit with the

correct screws (supplied).

Step3

Position the door unit into

the sunshield and finish

the installation with the

two anti-theft screws

(supplied).

BEFORE YOU START

•

Before installing the door unit, please first check to make sure the location is suitable for the

installation.

To avoid possible damages, the installation location should free from excessive moisture, dust

and vibration. For optimum transmission performance, avoid installing the door unit directly or

near metallic building materials. Excessive numbers of network access points, such as Wi-Fi

routers will also reduce the wireless transmission performance.

There are two ways to supply power to the door unit, either via batteries or DC power. The battery

power mode offers pure convenience, especially when no power source near by the installation

location. If door unlock function (3rd party door lock with own power supply required) is required,

please install the door unit via DC power mode only. Please note that both sets of dry contacts for

the door locks (not supplied) do not supply any power.

Put in 6x “AA” 1.5V batteries

Pairing

Key

INSTALLATION VIA DC POWER MODE

1. Remove the back cover of door unit.

2. (Optional) The door unit supports two types of third-party locks, 4-wire type and 2-wire type (please

note the door unit do not supply the power to the 3rd party locks). If you want to control the door

lock via the receiver, please follow the wire connection method in the figure above.

r wire to the terminal block with

"DC+" symbol. Connect the Black power wire to the terminal block with "DC-" symbol. Then plug

the power adapter to the DC IN jack and wall outlet.

4. Optional: The door unit has been paired to the receiver by factory default. If you need to pair the

door unit to the system again, please go to "Advanced Settings / Camera Setup" for more details.

5. Install the door unit in proper location.

Dry Contact A - Related icon

Dry Contact B - Related icon

A. 4-Wire Type Connection Diagram Power

Power

Input

B. 2-Wire Type Connection Diagram

Adaptor connect to DC Jack

Step1

Use the sunshield as a template

to drill 4 suitable holes and attach

the sunshield to the wall with the

screws and wall plugs (supplied).

Step2

Install the back panel to the door

unit with the correct screws

(supplied).

Step3

Position the door unit into

the sunshield and finish the

installation with the two

anti-theft screws (supplied).

MOUNTING THE THE ANSWERING UNIT

1. Connect the power adapter to the

DCIN jack and the nearest wall

outlet.

2. Press [Power Button] for two

seconds to turn on the receiver.

Note:

When using A/V cable connecting the receiver to TV, the display on receiver will not be

available and answering visitor function will also be turned off until disconnecting A/V cable

from the receiver.

Inhaltsverzeichnis

Andere Jaycar Electronics Gegensprechanlage Handbücher

Jaycar Electronics

Jaycar Electronics QC3602 Bedienungsanleitung

Beliebte Gegensprechanlage Handbücher anderer Marken

Bticino

Bticino LINEA 3000 Bedienungsanleitung

MSI

MSI MSI-140 Bedienungsanleitung

golmar

golmar Stadio Plus Bedienungsanleitung

CyberData

CyberData 011211 series Handbuch

Vidos

Vidos duo M1021 Bedienungsanleitung

Vimar

Vimar ELVOX 7539/E Bedienungsanleitung

SSS Siedle

SSS Siedle BTSV 850-03 Bedienungsanleitung

Dahua

Dahua VTO Series Bedienungsanleitung

Elvox

Elvox 5651 Bedienungsanleitung

Videx

Videx VIDEOKIT Series Bedienungsanleitung

Rocom

Rocom Doortello Business FW T2.05W2.04 Bedienungsanleitung

Viking

Viking E-35-EWP Bedienungsanleitung

Safeguard Supply

Safeguard Supply LRA-EX1000 Bedienungsanleitung

SSS Siedle

SSS Siedle BFCV 850 Series Bedienungsanleitung

GRD

GRD MAX V2 Bedienungsanleitung

Alecto

Alecto ADI-250 Bedienungsanleitung

Aiphone

Aiphone IE-8MD Bedienungsanleitung

Perel

Perel EDB4 Bedienungsanleitung