JB Systems CAM-SPOT 30TW Bedienungsanleitung

ENGLISH OPERATION MANUAL

JB SYSTEMS®1/5 CAM-SPOT 30TW

OPERATION MANUAL

Thank you for buying this JB Systems®product. To take full advantage of all possibilities and for your own

safety, please read these operating instructions very carefully before you start using this unit.

FEATURES

•Stylish, compact and budget friendly LED theater spot with tunable white color.

•3

watt LED, tunable white between 3000K and 6000K

•CRI >90.

•NO DMX inside: dimmer and color temperature controllable with 2 knobs on the back.

•Beam angle = 30°

•Magnetic filter frame for color filters and four-leaf barndoor included

•Special bracket that can be used for hanging and as floor stand.

•Completely silent operation, no noisy cooling fans on board

•Fixed mains power cord with standard mains plug (CEE 7/7) on the back panel.

BEFORE USE

•Before you start using this unit, please check if there’s no transportation damage. Should there be any, do

not use the device and consult your dealer first.

•Important: This device left our factory in perfect condition and well packaged. It is absolutely necessary

for the user to strictly follow the safety instructions and warnings in this user manual. Any damage caused

by mishandling is not subject to warranty. The dealer will not accept responsibility for any resulting defects

or problems caused by disregarding this user manual.

•Keep this booklet in a safe place for future consultation. If you sell the fixture, be sure to add this user

manual.

Check the contents:

Check that the carton contains the following items:

•English operating instructions, other languages can be downloaded from our website.

•CAM-SPOT 30TW

•Magnetic filter frame

•Barndoor

ENGLISH OPERATION MANUAL

JB SYSTEMS®2/5 CAM-SPOT 30TW

SAFETY INSTRUCTIONS:

•To protect the environment, please try to recycle the packing material as much as possible.

•To prevent fire or shock hazard, do not expose this appliance to rain or moisture.

•To avoid condensation to be formed inside, allow the unit to adapt to the surrounding temperatures when

bringing it into a warm room after transport. Condense sometimes prevents the unit from working at full

performance or may even cause damages.

•This unit is for indoor use only.

•Don’t place metal objects or spill liquid inside the unit. Electric shock or malfunction may result. If a foreign

object enters the unit, immediately disconnect the mains power.

•Locate the fixture in a well ventilated spot, away from any flammable materials and/or liquids. The fixture

must be fixed at least 50cm from surrounding walls.

•Don’t cover any ventilation openings as this may result in overheating.

•Prevent use in dusty environments and clean the unit regularly.

•Keep the unit away from children.

•Inexperienced persons should not operate this device.

•Maximum safe ambient temperature is 40°C. Don’t use this unit at higher ambient temperatures.

•Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging

and servicing.

•Allow the device about 10 minutes to cool down before to start servicing.

•Always unplug the unit when it is not used for a longer time or before to start servicing.

•The electrical installation should be carried out by qualified personal only, according to the regulations for

electrical and mechanical safety in your country.

•Check that the available voltage is not higher than the one stated on the unit.

•The power cord should always be in perfect condition. Switch the unit immediately off when the power cord

is squashed or damaged. It must be replaced by the manufacturer, its service agent or similarly qualified

persons in order to avoid a hazard.

•Never let the power-cord come into contact with other cables!

•This fixture must be earthed in order to comply with safety regulations.

•Don’t connect the unit to any dimmer pack.

•Always use an appropriate and certified safety cable when installing the unit.

•In order to prevent electric shock, do not open the cover. Apart from the mains fuse there are no user

serviceable parts inside.

•Never repair a fuse or bypass the fuse holder. Always replace a damaged fuse with a fuse of the same

type and electrical specifications!

•In the event of serious operating problems, stop using the fixture and contact your dealer immediately.

•The housing and the lenses must be replaced if they are visibly damaged.

•Please use the original packing when the device is to be transported.

•Due to safety reasons it is prohibited to make unauthorized modifications to the unit.

Important: Never look directly into the light source! Don’t use the effect in the presence of persons suffering

from epilepsy.

CAUTION: To reduce the risk of electric shock, do not remove

the top cover. No user-serviceable parts inside. Refer servicing

to qualified service personnel only.

The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the

use or the presence of un-insulated “dangerous voltage” within the product’s enclosure that may

be of sufficient magnitude to constitute a risk of electric shock.

The exclamation point within the equilateral triangle is intended to alert the user to the presence

of important operation and maintenance (servicing) instructions in the literature accompanying

this appliance.

This symbol means: indoor use only

This symbol means: Read instructions

This symbol determines: the minimum distance from lighted objects. The minimum distance

between light-output and the illuminated surface must be more than 1 meters

CAUTION: Do not stare at operating lamp.

May be harmful to the eyes.

ENGLISH OPERATION MANUAL

JB SYSTEMS®3/5 CAM-SPOT 30TW

DESCRIPTION:

1. MAGNETIC FILTERHOLDER: to hold different kinds of filters with a diameter of 7cm.

2. Knob to fix hanging bracket in the desired position.

3. HANGING BRACKET: used to hang the projector or to put it on a surface by means of the extra rotating

levers .

4. MAINS INPUT: 1m power cord with standard CEE 7/7 mains plug.

5. SAFETY EYE: used to attach a safety cable when the unit is rigged, see paragraph “overhead rigging”.

6. COLOR TEMP: used to change the color temperature from warm white (WW –3000K) to cold white

(CW –6000K)

7. MANUAL DIMMER: used to dim the output manually.

8. BARN DOORS: they facilitate shaping of the beam of light from the fixture, and prevent the distinctive

scatter of light created by the lens from spilling into areas where it is not wanted, such as the eyes of

audience members.

OVERHEAD RIGGING

Important: The installation must be carried out by qualified service personal only. Improper

installation can result in serious injuries and/or damage to property. Overhead rigging requires

extensive experience! Working load limits should be respected, certified installation materials should

be used, the installed device should be inspected regularly for safety.

•Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging

and servicing.

•Locate the fixture in a well ventilated spot, far away from any flammable materials and/or liquids. The

fixture must be fixed at least 50cm from surrounding walls.

•The device should be installed out of reach of people and outside areas where

persons may walk by or be seated.

•Before rigging make sure that the installation area can hold a minimum point load of

10times the device’s weight.

•Always use a certified safety cable that can hold 12times the weight of the device

when installing the unit. This secondary safety attachment should be installed in a way

that no part of the installation can drop more than 20cm if the main attachment fails.

•The device should be well fixed; a free-swinging mounting is dangerous and may not be considered!

•Don’t cover any ventilation openings as this may result in overheating.

•The operator has to make sure that the safety-relating and machine-technical installations are approved by

an expert before using them for the first time. The installations should be inspected every year by a skilled

person to be sure that safety is still optimal.

ENGLISH OPERATION MANUAL

JB SYSTEMS®4/5 CAM-SPOT 30TW

ELECTRICAL INSTALLATION AND USE

Important: The electrical installation should be carried out by qualified personal only,

according to the regulations for electrical and mechanical safety in your country.

Simply connect the projector to the mains and adjust the dimmer (7) on the back panel to the desired level.

Use the “COLOR TEMP”knob to adjust the color temperature from warm white (WW) to cold white (CW).

You can easily add optional filters (color, frost) by means of the magnetic filter holder (diameter : 7cm).

MAINTENANCE

•Make sure the area below the installation place is free from unwanted persons during servicing.

•Switch off the unit, unplug the mains cable and wait until the unit has been cooled down.

During inspection the following points should be checked:

•All screws used for installing the device and any of its parts should be tightly fastened and may not be

corroded.

•Housings, fixations and installations spots (ceiling, truss, suspensions) should be totally free from any

deformation.

•When an optical lens is visibly damaged due to cracks or deep scratches, it must be replaced.

•The mains cables must be in impeccable condition and should be replaced immediately when even a

small problem is detected.

•In order to protect the device from overheat the cooling fans (if any) and ventilation openings should be

cleaned monthly.

•The interior of the device should be cleaned annually using a vacuum cleaner or air-jet.

•The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to

optimize light output. Cleaning frequency depends on the environment in which the fixture operates: damp,

smoky or particularly dirty surroundings can cause greater accumulation of dirt on the unit’s optics.

•Clean with a soft cloth using normal glass cleaning products.

•Always dry the parts carefully.

Attention: We strongly recommend internal cleaning to be carried out by qualified personnel!

SPECIFICATIONS

This unit is radio-interference suppressed. This product meets the requirements of the current European and

national guidelines. Conformity has been established and the relevant statements and documents have been

deposited by the manufacturer.

Mains Input: AC 180 - 240V, 50Hz

Power consumption: 35 Watt

Power connections: Power cord, 1m with mains plug (CEE 7/7).

Lamp: LED, 30W COB CW + WW

CRI: >90

Beam Angle: 30°

IP-Rating: IP20

Size: see drawing

Weight: 2,46 kg

ENGLISH OPERATION MANUAL

JB SYSTEMS®5/5 CAM-SPOT 30TW

The information might be modified without prior notice

You can download the latest version of this user manual on our website: www.jb-systems.eu

Inhaltsverzeichnis

Andere JB Systems Beleuchtungsausrüstung Handbücher

JB Systems

JB Systems LASER BURST II Bedienungsanleitung

JB Systems

JB Systems LED DJ-BAR Bedienungsanleitung

JB Systems

JB Systems DMX512 Bedienungsanleitung

JB Systems

JB Systems TWINBEAM COLOR Mk2 Bedienungsanleitung

JB Systems

JB Systems LED Crossfire Bedienungsanleitung

JB Systems

JB Systems LED PINSPOT Bedienungsanleitung

JB Systems

JB Systems APOLLO Bedienungsanleitung

JB Systems

JB Systems LED Flower Bedienungsanleitung

JB Systems

JB Systems LED LIGHTBAR 4TC Bedienungsanleitung

JB Systems

JB Systems Plano Spot 7TC Bedienungsanleitung

JB Systems

JB Systems Invader Bedienungsanleitung

JB Systems

JB Systems Gobo Flower Bedienungsanleitung

JB Systems

JB Systems Theatre Spot 1000W Bedienungsanleitung

JB Systems

JB Systems Led Strobe Bedienungsanleitung

JB Systems

JB Systems Radiant Bedienungsanleitung

JB Systems

JB Systems SCARAB LASER Bedienungsanleitung

JB Systems

JB Systems KALEIDO Bedienungsanleitung

JB Systems

JB Systems BABY FALCON Bedienungsanleitung

JB Systems

JB Systems FROG laser Bedienungsanleitung

JB Systems

JB Systems 6 Light Bedienungsanleitung

JB Systems

JB Systems FSP-1000 Bedienungsanleitung

JB Systems

JB Systems MINI-PAR 12TC Bedienungsanleitung

JB Systems

JB Systems Super Winner HID 150W Bedienungsanleitung

JB Systems

JB Systems LOUNGE LASER Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung

Silvair

Silvair MESH-CEDRP Bedienungsanleitung

S&P

S&P PCRL80 Bedienungsanleitung