SL7 1TB
Customer Helpline 0845 600 5526 Monday to Friday 09.00 to 17.00
www.JCBdiy.com
GENERAL SAFETY RULES
INTENDED USE
The chainsaw is designed for cutting branches, trunks, logs and beams. It is only
designed to cut wood and to be used outdoors.
Do not use the chainsaw for other purposes not listed above.The chainsaw is not to
be used for professional tree services. It is not to be used by children or by persons
not wearing adequate personal protective equipment and clothing.
For safe operation, read and understand all instructions before using the chainsaw.
Follow all safety instructions. Failure to follow all safety instructions listed below can
result in serious personal injury.
Know your tool. Read the operator’s manual carefully. Learn the saw’s
applications and limitations as well as the specific potential hazards related to the
tool. We recommend you attend a professional training course to increase your
awareness and proficiency in all chainsaw operations.
Kickback may occur when the nose or tip of the guide bar touches an object, or
when the wood closes in and pinches the saw chain in the cut. Tip contact in some
cases may cause a lightning-fast reverse reaction, kicking the guide bar up and
back toward the operator. Pinching the saw chain along the top of the guide bar
may push the guide bar rapidly back toward the operator. Either of these reactions
may cause you to lose control of the saw, which could result in serious personal
injury. Do not rely exclusively upon the safety devices built into the saw. As a
chainsaw user, you should take every step to keep your cutting jobs free from
accident and injury.
With a basic understanding of kickback, you can reduce or eliminate the element
of surprise. Sudden surprise contributes to accidents.
Keep a good firm grip on the saw with both hands when the engine is running.
Place your right hand on the rear handle and your left hand on the front handle with
your thumbs and fingers encircling the chainsaw handles. A firm grip together with
a stiff left arm will help you maintain control of the saw if kickback occurs.
Make sure that the area in which you are cutting is free from obstructions. Do not
let the nose of the guide bar contact a log, branch, fence or any other obstruction
that could be hit while you are operating the saw.
Always cut with the engine running at full speed. Fully squeeze the throttle trigger
and maintain a steady cutting speed.
Do not overreach or cut above chest height.
Follow the manufacturer’s sharpening and maintenance instructions for the saw
chain.
Only use replacement bars and chains specified by the manufacturer or the
JCB-CS38_960488008-01_Manual_final_ OEM licence.indd 2JCB-CS38_960488008-01_Manual_final_ OEM licence.indd 2 12/3/2010 5:58:23 PM12/3/2010 5:58:23 PM
