jcb 65R-1 Bedienungsanleitung
1
Compact Excavators
65R-1, 67C-1, 85Z-1, 86C-1,
90Z-1, 100C-1
Quick Start Guide
QUICKSTART.JCB.COM
2Please see operator manual for full details.
>
This Quick Reference Guide is to provide quick and simple information to the Operator
and does not include any health and safety aspects. In addition, because of our continual
development of machines, features described in this Quick Reference Guide may differ
from those on your machine. No errors and emissions be entirely ruled out.
>
This Quick Reference Guide DOES NOT replace the Operators Manual. You MUST
read ALL the disclaimers and safety and other instructions in the Operators Manual
before initially operating this product. Accordingly, no legal claims can be entertained on
the basis of the data, illustrations or descriptions in this Quick Reference Guide.
>
This machine should not be operated by any person who isn’t appropriately qualified or
had the appropriate training.
>
Operation of this machine without periodic maintenance could cause it to malfunction.
For more information please contact your JCB Dealer.
Disclaimer
65R-1, 67C-1, 85Z-1, 86C-1, 90Z-1, 100C-1 3
Intended Use ......................................................................................................................................4
Static Dimensions ...............................................................................................................................5
Tie Down Points ................................................................................................................................6
Lifting Points .......................................................................................................................................7
Cab Layout & Controls ................................................................................................................. 8 -11
Start Up Sequence ...........................................................................................................................12
Setting Auxiliary Flows ......................................................................................................................13
Hydraulic Quick Hitch .......................................................................................................................14
Shutdown Sequence .........................................................................................................................14
Maintenance Position ........................................................................................................................15
Service / Maintenance Schedule .................................................................................................. 16-18
Service & Maintenance Points ..................................................................................................... 19-20
Fluids & Lubricants ...................................................................................................................... 21-23
Machine Attachments .......................................................................................................................24
Troubleshooting / FAQs ..............................................................................................................25-26
Index
4Please see operator manual for full details.
General
> Machine Type – Compact Excavator
> Self propelled machine with a tracked undercarriage
> 360° revolving upper structure with boom, dipper, bucket and slew mechanism
Intended Use
> Machine intended to be used in normal conditions as detailed in the operators manual
> With bucket fitted, machine work cycle consists of digging, elevating, slewing and discharging
of materials
> Applications include earthmoving, road construction, building and construction, landscaping etc.
> Can be used for object handling
> Not intended for use in mining and quarrying applications, demolition, forestry, any use
underground and any explosive atmospheres
> Must not be used for forestry, used with attachments of unknown weight, used on surfaces with
unknown stability – list not exhaustive
>
PPE may be required in certain applications/environments e.g. high silica concentration or asbestos
> The machine should not be operated by any person without appropriate qualifications, training
or experience of using this type of machine
> Prior to use, the machine’s suitability should be considered with regards to the intended
applications and any hazards which may be present
Intended Use
65R-1, 67C-1, 85Z-1, 86C-1, 90Z-1, 100C-1 5
Dimensions
Fig 1
Machine model 65R-1 67C-1 85Z-1 86C-1 86C-1
TAB 90Z-1
100C-1
A Sprocket idler centres mm 1985 2325
B Track length on ground mm 1985 2325
CUndercarriage overall
length – rubber tracks mm 2490 2950
Undercarriage overall
length – steel tracks 2490 2900
D Kingpost clearance mm 620 793
ETailswing radius mm 118 5 1385 114 5 1490 160 0 114 5 1601
FOverall width
of superstructure mm 1798 2168 2187
G Height over cab mm 2582 2582 2706
H Ground clearance mm 240 350
I Track gauge mm 1600 1850
JWidth over tracks
(450 shoes) mm 2000 2300
KTransport length
with standard dipper mm 5710 5600 5833 6435 6655 6585 6860
LTransport length
with standard dipper 2360 2600 2706 2593 2580 2593
M Track height mm 560 650
NCounterweight clearance mm 637 762
OOperating weight* kg 6601 6760 8300 8600 9448 8607 9733
* Standard machine specification, please see data plate for specific machine weight.
I
J
A
B
C
K
FE
LG
H
MN
D
6Please see operator manual for full details.
Tie Down Points
Fig 2
A Rear track tie-down points
C 65R-1 / 67C-1 Angle = 46.2 ± 1.5°
Angle = 47 ± 1.5° (dozer)
8-10T Angle = 40 ± 1.5°
B Front track tie-down points
D 65R-1 / 67C-1 Length = 2,000 ± 100mm
8-10T Length = 2,415 ± 100mm
The correct tie down positions are identified on the machine by their labels:
A Rear track tie-down points (both sides) B Front track tie-down points (both sides)
Fig 3
65R-1, 67C-1, 85Z-1, 86C-1, 90Z-1, 100C-1 7
Fig 4
Lifting Points
Machine
model 65R-1 67C-1 85Z-1 86C-1 86C-1
TAB 90Z-1
100C-1
A Boom Lift Point
B Dozer Lift point
Cdegrees 35 30 30 25 30
Dmm 2500 2320 2755 2295 2263 2725 2075
Emm 4800 4620 5325 5285 5352 5800 5250
Fmm 1052 966 1096 1083 1090 1091 1091
Gmm 850 1048 990 1187 1203 982 1207
Hmm 803 682 915 1449 117 7 1073 1038
The correct lifting positions are identified on the machine by their labels:
COG- Centre of Gravity
8Please see operator manual for full details.
Instrument Panel
Fig 5
A Track controls
B Swing control pedal
C Instrument panel
D Excavator controls
E Dozer blade control lever
F Two-speed tracking switch
G Hand throttle control
H Ignition key switch
J Switch console
K Auxiliary power socket
L Entertainment system
M HVAC controls
N Operator seat
P Glass hammer
Q Fire extinguisher
R Foot rest
Operator Station Layout
Cab and Switch Panel
Fig 6
A Left
B Up
C Select
D Down
E Right
F 3.5" colour display
65R-1, 67C-1, 85Z-1, 86C-1, 90Z-1, 100C-1 9
A Fuel gauge
B Engine speed
C Two speed status warning
D Lift overload status
E Seat belt status
F Service due warning
G Clock
H Hydraulic oil temperature
J Coolant temperature warning
K Dozer float status
L SAE / AUX status warning
M Auto idle status
N Engine power mode status
P Hydraulic active status
Fig 7
Normal Operating Screen
A High flow aux warning
B High flow aux warning – single acting
C Low flow aux mode warning
D High flow auxiliary max flow indicator
Fig 8
Auxiliary Screen
Power Modes
Icon Variants
Auxiliary Modes Hydraulics Active Mode
Heavy
mode
Eco
mode
AUX mode
(SAE)
Swing mode
(SAE)
Hydraulics
inactive mode
Hydraulics
active mode
AUX mode
(ISO)
Swing mode
(ISO)
10 Please see operator manual for full details.
Console Switches
Fig 9
A Graphic symbol
B Light bar
C 3 way position switch
D 2 way position switch / momentary switch
Work Lights
1 = Off
2 = On (Boom & front)
3 = On (Boom, front, & rear)
Beacon
1 = Off
2 = On
Overload Warning System
1 = Off
2 = Silence/un-silence buzzer
Excavator Arm Quickhitch
1 = Off
2 = Start unlock sequence
Controls Isolation (2GO)
1 = Off
2 = Activate/de-activate
hydraulic controls
Window Wipers
1 = Off
2 = Intermittent / continuous /
washer
Auxiliary Hydraulic Circuit
1 = Adjust max high flow
2 = Adjust auxiliary mode
Power Mode
1 = Off
2 = ECO mode / heavy mode
Automatic Idle
1 = Off
2 = On
Dozer Float
1 = Off
2 = Activate/de-activate
dozer float
Andere Handbücher für 65R-1
1
Dieses Handbuch passt für folgende Modelle
6
Inhaltsverzeichnis
Andere jcb Bagger Handbücher
jcb
jcb JS145W Bedienungsanleitung
jcb
jcb 67C-1 Bedienungsanleitung
jcb
jcb JS130 Bedienungsanleitung
jcb
jcb 8026 CTS Bedienungsanleitung
jcb
jcb JS Series Bedienungsanleitung
jcb
jcb JS70 Bedienungsanleitung
jcb
jcb JC160 Bedienungsanleitung
jcb
jcb JCB305 Bedienungsanleitung
jcb
jcb 18z-1 Bedienungsanleitung
jcb
jcb JS70 Bedienungsanleitung
jcb
jcb 270 Bedienungsanleitung
jcb
jcb JS 200 Series Bedienungsanleitung
jcb
jcb LPG TLT Series Bedienungsanleitung
jcb
jcb JCB380 Bedienungsanleitung
jcb
jcb 411HT Bedienungsanleitung
jcb
jcb 3DX Super Bedienungsanleitung
jcb
jcb 2DXL Bedienungsanleitung
jcb
jcb 45Z-1 Bedienungsanleitung
jcb
jcb 8025 ZTS Bedienungsanleitung
jcb
jcb 19C-1E Bedienungsanleitung
