jcb 21-MS-ST Bedienungsanleitung
ORIGINAL INSTRUCTIONS
EN
21-MS-ST
Original Instructions
IM-MS-ST-EN
Iss: 06/2021
2825 21-MS-ST Mitre Saw Stand Manual.indd 12825 21-MS-ST Mitre Saw Stand Manual.indd 1 28/06/2021 10:4728/06/2021 10:47
2
21-MS-ST
Instruction & User Manual
GENERAL WARNINGS
To reduce the risk of injury, the user must read the instruction manual.
This symbol is used throughout this manual to warn the user about potential
risks. Please read & understand these sections before using the device.
Personal Protective Equipment (P.P.E.), such as ear defenders, eye protection,
safety gloves and a dust mask, must be worn during the operation of the
device.
WARNING: Drilling, sawing, sanding or machining wood products can
expose you to wood dust, a substance known to the State of California
to cause cancer. Avoid inhaling wood dust or use a dust mask or other
safeguards for personal protection. For more information go to www.
P65Warnings.ca.gov/wood.
2825 21-MS-ST Mitre Saw Stand Manual.indd 22825 21-MS-ST Mitre Saw Stand Manual.indd 2 28/06/2021 10:4728/06/2021 10:47
3
21-MS-ST
Instruction & User Manual
Contents
SAFETY WARNINGS 4
COMPONENT LIST 5
TECHNICAL DATA 6
OPERATING INSTRUCTIONS 7
Intended Use 7
Before starting the equipment 7
ASSEMBLY AND OPERATION 8
Cleaning, maintenance, storage and transport 11
WARRANTY STATEMENT 12
2825 21-MS-ST Mitre Saw Stand Manual.indd 32825 21-MS-ST Mitre Saw Stand Manual.indd 3 28/06/2021 10:4728/06/2021 10:47
4
21-MS-ST
Instruction & User Manual
SAFETY WARNINGS
m Use the mitre saw stand only in
conjunction with suitable electric
power tools!
m Check the mitre saw stand for
damage each time before use.
Electric power tools shall not be
mounted or operated on damaged
support arms / crossbars.
m Electric power tools must be bolted
to the support arms / crossbars and
be secured on the mitre saw stand in
accordance with the manufacturers
instructions.
m Do not use the stand on uneven
surfaces. The stand is designed to be
used on a stable flat surface.
m Do not use on a slippery surface. The
stand load capacity is greatly reduced
if used on a slippery surface.
m Always ensure the mitre saw stand is
secure when setting it up.
m Always ensure that you assume a
natural and safe standing position
when working.
m Do not use the mitre saw stand for
purposes for which it is not intended.
m Modifications or unauthorised
changes to the mitre saw stand as
well as the use of unapproved parts is
forbidden.
m All parts of the mitre saw stand,
including any safety devices, must
be correctly mounted in order to
guarantee trouble-free operation.
m Keep the mitre saw stand out of
reach of children. Store the device
in a location that is inaccessible to
unauthorised persons and children.
m Do not exceed the maximum working
load specified on the product label. It
is unsafe to climb, sit or stand on the
table.
ATTENTION!
When using electric power tools, in
conjunction with the mitre saw stand, the
respective machine-specific safety measures
must be implemented as protection against
electric shock, and the risk of injury or fire.
Read all of the instructions for the electric
power tool that you intend to mount and
operate before using the tool.
Safety instructions for the electric device
mounted must likewise be observed. Store
these safety instructions safely.
Observe all safety instructions. If you disregard
the safety instructions, you endanger yourself
and others.
Never place your fingers or hands in the
vicinity or in line with the saw blade
WARNING!
2825 21-MS-ST Mitre Saw Stand Manual.indd 42825 21-MS-ST Mitre Saw Stand Manual.indd 4 28/06/2021 10:4728/06/2021 10:47
5
21-MS-ST
Instruction & User Manual
COMPONENT LIST
AMitre saw stand
BSupport arm 2x
CAdjustable workpiece support 2x
DCoach bolt M6x60 4x
EWasher 6mm 4x
FSpring washer 6mm 4x
GNut M6 4x
HStar-grip screw (small) 4x
I Star-grip screw (large) 2x
1
AF
E
G
H
I
2
B
C
D
AA
I
B
C
H
2825 21-MS-ST Mitre Saw Stand Manual.indd 52825 21-MS-ST Mitre Saw Stand Manual.indd 5 28/06/2021 10:4728/06/2021 10:47
6
21-MS-ST
Instruction & User Manual
TECHNICAL DATA
Dimensions (LxWxH) in mm 1000 - 1650 x 580 x 810 - 910 mm
Table height 750 mm
Height range of the workpiece supports 810 - 910 mm
Width range of the workpiece supports 1000 - 1650 mm
Max. permissible load 200 kg
Weight net / gross 13.3 / 15.1 kg
Dimensions (LxWxH) in inch 40 - 65 x 23 x 32 - 36”
Table height 30”
Height range of the workpiece supports 32 - 36”
Width range of the workpiece supports 40 - 65”
Max. permissible load 440 lb
Weight net / gross 29.3 / 33.2 lb
2825 21-MS-ST Mitre Saw Stand Manual.indd 62825 21-MS-ST Mitre Saw Stand Manual.indd 6 28/06/2021 10:4728/06/2021 10:47
7
21-MS-ST
Instruction & User Manual
OPERATING INSTRUCTIONS
Intended Use
Always observe the proper use of your mitre
saw stand.
The mitre saw stand is designed for use with
tabletop devices such as mitre saws, scroll
saws, circular table saws, etc.
Electric power tools without suitable mounting
holes are not permitted to be fitted to the
mitre saw stand and shall not be operated in
conjunction with the mitre saw stand. Electric
power tools must be firmly bolted
to the mitre saw stand before starting
them up.
The mitre saw stand is also designed as a
workpiece support when working with mitre
saws, scroll saws, circular table saws, and other
similar electric power tools.
The maximum workpiece length is 10ft (3m).
Additional workpiece supports may have to be
used (e.g. a roller trestle) in order to prevent
longer workpieces tilting.
Attention: Ensure that the workpiece support is
secure and not tilted!
Do not use the mitre saw stand as a ladder or
as scaffolding. Ensure that all handgrips, nuts
and screws are tightened before use. Electric
power tools on this device shall not exceed an
overall height of 130 cm (4 ft). The maximum
permissible load is 200 kg (440 lbs). Ensure
that the mitre saw stand is on a level, firm and
stable floor. Any use beyond this is improper
use. The manufacturer is not responsible for
the resultant damages, the user bears this
risk alone.
Before starting the equipment
Check the device for transport damage.
Immediately report any damage to the
transport company that delivered the device.
2825 21-MS-ST Mitre Saw Stand Manual.indd 72825 21-MS-ST Mitre Saw Stand Manual.indd 7 28/06/2021 10:4728/06/2021 10:47
8
21-MS-ST
Instruction & User Manual
The mitre saw stand is largely assembled and
you need only fit the support arms and the
crossbars as follows:
Erecting the mitre saw stand
(Fig. 3-4)
Place the mitre saw stand (A) on the floor or
on a workbench such that the frame legs (A.1)
are uppermost.
Press the spring pins (J) and fold out the frame
legs.
Once the spring pin latches into the intended
position, the frame leg is locked.
Rotate the mitre saw stand and set down on
its feet.
Mounting support arms (Fig. 5)
Fit the support arms (B) to the frame bed (A)
by pulling the locking lever (B.3) upwards to
unlock it and then latching the arm into place
on the frame base, firstly on the front side
(B.2).
Lower the rear side onto the bed and fasten
the support arm in place on the frame bed by
pressing the locking lever (B.3).
Disassembly is performed in reverse order.
ASSEMBLY AND OPERATION
A.1
3
4
M
A
B.2
B.3
B.1
B
A
5
J
2825 21-MS-ST Mitre Saw Stand Manual.indd 82825 21-MS-ST Mitre Saw Stand Manual.indd 8 28/06/2021 10:4728/06/2021 10:47
9
21-MS-ST
Instruction & User Manual
m Fasten the tabletop machine with 4 coach
screws (D), 4 washers (E), 4 spring washers
(F) and 4 hexagonal nuts (G) on each of the
support arms.
m Tighten the screws after assembly.
m Fasten the support arms (B) with the
mounted tabletop machine on the mitre
saw stand, as described on page 8.
Fitting the workpiece supports (Fig. 6-7)
Insert the workpiece support (C) into the
support post (K) of the frame bed and fasten in
place with the star-grip screw (I).
Repeat the above for the other support.
The width and height of the workpiece
supports can be adjusted with the star-grip
screws (H, I). (Fig. 6)
Fastening your tabletop machine (Fig. 7)
Different tabletop machines can be fastened to
your mitre saw stand by adjusting the support
arms (B) to the spacing of the mounting holes
on your machine.
m Place your tabletop machine (e.g. mitre
saw) on the support arms (B) (Fig. 7).
8
6
B
H
7
C
K
I
G
F
E
D
2825 21-MS-ST Mitre Saw Stand Manual.indd 92825 21-MS-ST Mitre Saw Stand Manual.indd 9 28/06/2021 10:4728/06/2021 10:47
10
21-MS-ST
Instruction & User Manual
Using the workpiece stops, Fig. 9
The workpiece supports (C) have integrated
workpiece stops (C.2), which can be used
to saw multiple pieces of wood to the same
length. (Fig. 8)
m Loosen the star-grip screw (I) on the desired
side of the mitre saw stand and adjust the
height of the workpiece support (C) such
that the support surface (C.2) is at the same
height as the workpiece support of the saw.
(Fig. 9)
m Loosen the star-grip screws (I) to slide the
workpiece support horizontally.
m Set the desired distance between the saw
blade and the stop surface (C.1).(Fig. 8)
m Lock your setting by tightening the star-grip
screws (H) again.
A
9
8C
C.1
C.2
HC
I
2825 21-MS-ST Mitre Saw Stand Manual.indd 102825 21-MS-ST Mitre Saw Stand Manual.indd 10 28/06/2021 10:4728/06/2021 10:47
Inhaltsverzeichnis
Andere jcb Gesehen Handbücher
jcb
jcb JS710LE Installationshandbuch
jcb
jcb JCB-MS-210SB Planungshandbuch
jcb
jcb MS-254SB Planungshandbuch
jcb
jcb JCB-MS-254SB-L Planungshandbuch
jcb
jcb JCB-18CS Planungshandbuch
jcb
jcb JCB-MS-210C Planungshandbuch
jcb
jcb JCB-20BLMS Bedienungsanleitung
jcb
jcb JCB-20RS Planungshandbuch
jcb
jcb JCB-18RS Planungshandbuch
jcb
jcb JCB-MS-305SB-L Planungshandbuch
