Jensen JMV111 - DVD Player With LCD Monitor Bedienungsanleitung

OPERATION

MANUAL

JMV12

12.1" OVERHEAD LCD

MONITOR WITH

DVD PLAYER

128-7667A

Important Notice

An LCD panel and/or video monitor may be installed in a motor vehicle and visible to the driver if the LCD panel or video monitor is used

for vehicle information, system control, rear or side observation or navigation. If the LCD panel or video monitor is used for television

reception, video or DVD play, the LCD panel or video monitor must be installed so that these features will only function when the vehicle

is in “park” or when the vehicle’s parking brake is applied.

An LCD panel or video monitor used for television reception, video or DVD play that operates when the vehicle is in gear or when the

parking brake is not applied must be installed to the rear of the driver’s seat where it will not be visible, directly or indirectly, to the operator

of the motor vehicle.

Warnings

•Do not use any solvents or cleaning materials when cleaning the video monitor.

•Do not use any abrasive cleaners, they may scratch the screen.

•Use only a lightly dampened lint free cloth to wipe the screen if it is dirty.

•Lock the LCD screen in the fully closed position when not in use.

•Before putting on headphones always adjust the volume setting to the lowest position.

•Remember to leave the dome light switch in the off or auto positions when the vehicle is unattended, as the dome lights, if left on, can drain

the vehicle’s battery.

•Do not put pressure on the screen.

•Caution children to avoid touching or scratching the screen, as it may become dirty or damaged.

Television Reception

This entertainment system is designed primarily for viewing prerecorded movies or playing video games. If this system has the optional TV

Tuner (PODTVT2) installed: Television reception in a moving vehicle will be limited and in some areas will not be possible due to weak and

variable signal strength. Television viewing in a stationary vehicle will result in an improvement, but may still be marginal due to signal

strength. The quality of the picture will not be consistent with home TV reception. Reception may be affected by weather and distance from

TV station. A weak signal may cause the picture to roll, be snowy, or cause some color loss

Licensed under one or more of the following patents,

Patent NOS. 5,775,762 and 5,927,784

•12.1" TFT (Thin Film Transistor) Active Matrix LCD

(Liquid Crystal Display) Monitor

• Built-in DVD Player

* Auto On with Disc insertion

•Selectable (M1 and M2) IR Receive and Transmit

Codes

•Multi-Lingual OSD (On Screen Display) for Control of

Picture Quality and Functions

•Switchable Channel Infrared Transmitter for use with

IR Wireless Headphones

• Four Audio / Video Source Inputs (DVD, AUX/Game,

AV1, TV*/AV2)

•Dome Lights with Built-in Three Way Switch

•Built-in Five Frequency Wireless FM Modulator

•Last Position Memory for DVD

•Headphone Jack

• Screen Mode Selection (16:9, 4:3)

• Wireless Game Controller

•Full Function Remote Control

•Backlit Controls

•Day / Night Picture Modes

• AV Output

* Optional TV tuner (P/N PODTVT2)

•Pause To Talk Feature

FEATURES

Congratulations on your purchase of the JENSEN JMV12

DVD Player with Drop-Down Video / Monitor. The JMV12 has

been designed to give you and your family many years of

video entertainment in the mobile environment. Please read

the directions that follow to familiarize yourself with the

product to ensure that you obtain the best results from your

equipment.

Please note: Installation options vary, see the individual

owner’s manuals for each component in your system to

obtain a full understanding of each component’s operation.

Safety Precaution

For safety reasons, when changing video media it is

recommended that the vehicle is not in motion, and that you

do not allow children to unfasten seat-belts to change video

media or make any adjustments to the system. System

adjustments can be accomplished using the remote control,

while seat-belts remain fastened. Enjoy your JENSEN

entertainment system but remember the safety of all

passengers remains the number one priority.

CONTROLS AND INDICATORS DIAGRAM

(FRONT VIEW)

ON O FF A UTO

FM M S

––++

12345678

1. EJECT () Button

This Button is used for ejecting discs from the disc

Compartment. (Note: Disc can be ejected with the unit turned

Off. Vehicle has to running or in ACC position). After the

Disc is removed the unit will turn Off after 15-20 seconds.

2. STOP (n) Button

This button is used to stop playback.

3. Source Select

Use to select one of the four sources: DVD, AV1, AUX / GAME,

AV2 / *TV (Optional).

4. Volume (+)

To increase the volume of wired headphones and increase

the level of selected picture controls.

5. Picture Select Button

Allows the user to enter the picture adjustment mode.

6. Volume (–)

To decrease the volume of wired headphones and increase

the level of selected picture controls.

7. FMM Source Select Switch

Used to select the frequency in sequence rotation: FM OFF,

88.3MHz, 88.7MHz, 89.1MHz, 89.5MHz or 89.9MHz.

8. PLAY (u) Button

This button is used to start playback of a disc.

CONTROL FUNCTION DESCRIPTION (FRONT VIEW)

9. POWER ( ) Button

Used to turn the system on/off. Bright red when the system is

on, dim when off.

10. Dome Lights

Provide additional interior illumination.

11. Infrared Transmitter and Sensor

Use to transmit audio the wireless headphone. Also allows the

remote control to operate the JMV12 and to control other

accessories in the system.

12. Three Position Dome Light Switch

ON – Turns on the dome lights.

OFF – The dome lights will not turn on in this position.

AUTO – Automatically switches on the dome lights in

conjunction with the vehicle's interior illumination.

13. Ventilation Openings

14. LCD Cut Off Switch

Used to turn off the LCD panel monitor when in the closed

position.

15. LCD Panel

16. Screen Release

Press to release the screen.

Selecting a Monitor Code (M1 or M2)

1. Press and hold the SOURCE and FMM buttons on the unit

for 3 seconds and the unit will switch from M1 to M2

or M2 to M1.

2. The selected mode (M1 or M2) will be retained in memory

until changed by the user.

Note:

OSD will appear on the screen for 4~5 seconds

FMM OFF

DVD

IRT OFF

FMM 88.3MHz

AUX/GAME

IRT ON

The JMV12 has an option that allows the user to select from two

IR transmit and receive codes (M1 or M2). This feature can be

used when using two JMV12s in the same installation or if the

vehicle has an RSA (Rear Seat Audio) that uses an “A” channel

headset. The JMV12 comes factory set to M1. When in the M1

mode the unit will respond to remote commands when M1 is

selected on the remote and will transmit audio on the A channel.

When in the M2 mode the unit will respond to remote commands

when M2 is selected on the remote and will transmit audio on the

B channel.

Note: 2-channel IR headphones will need to be used when

monitor is set to M2 mode.

Side View

Back View

CONTROL FUNCTION DESCRIPTION (SIDE VIEW & BACK VIEW)

VIDEO L AUDIO R

1 2 3 4 5

1. DVD Disc insertion Slot

For loading and removing discs. Unit will turn On and load

disc when disc is inserted.

Note: Disc slot will be lit when unit is turned Off for easy

loading at night.

1. Headphone Jack

Allow the use of wired headphones with a 1/8" (3.5mm) plug

for listening to the video program audio.

2. Auxiliary Video Input

3. Auxiliary Audio Left Input

4. Auxiliary Audio Right Input

5. PAUSE (;) Button

Allows the the front seat passenger to pause the playback.

Pressing PAUSE again or pressing the PLAY button will

resume normal playback.

To Talk

REMOTE CONTROL OPERATION

Battery Installation

Before attempting to operate your Remote Control, install the

batteries as described below.

1) Turn the Remote Control face down. Using your finger, slide

the battery cover off in the direction of the arrow.

2) Install Two “AAA” batteries. Make sure that proper polarity

(+ or -) is observed.

3) Align the cover tabs with the remote control and slide the

cover until it locks.

The remote control will operate the JMV12. It is not a universal

remote control and will not control equipment from other

manufacturers.

REMOTE CONTROL FUNCTION DESCRIPTION

POWER

SOURCE

VOLUME

AUTO

MEMORY

SKIP/

ERASE/

WRITE

FMM

ON/OFF

RETURN DISPLAY

IRT

ON/OFF MUTE

CHANNEL

SELECT

DAY/

NIGHT PIX

MONITOR SELECT

1 2

DVD

REPEAT

SETUP

ZOOMAUDIO

SUBTITLE

A-B

EJECT

1. POWER Button*

Press this button to turn the JMV12 ON and OFF.

2. MONITOR SELECT

M1 Button – Change the remote control code to enable to control of the JMV12 when set to the M1 mode.

M2 Button – Change the remote control code to enable to control of the JMV12 when set to the M2 mode.

3. TV Mode Select Button**

Switches certain function keys on the remote control for TV functions.

4. DVD Mode Select Button

Switches certain function keys on the remote control for DVD functions.

5. SOURCE Button*

Each time the button is pressed, the audio / video source will change in the following sequence: DVD > AUX/GAME > AV1 > AV2/TV**.

6. AUTO MEMORY Button (AUTO PROGRAM Button)**

When the AUTO MEMORY button is pressed, all channels are searched and channels that are detected with signals of sufficient

levels are automatically stored in memory.

7. SKIP / SEARCH Button**

This button selects between SKIP and SEARCH mode. In "SKIP mode" the TV tuner will tune and stop on channels that are

programmed into memory when the CHANNEL UP / DOWN buttons are used. When the SKIP mode is disable, the TV will stop on all

active channels.

8. ERASE / WRITE Button**

While tuned to a channel, pressing this button will alternately store or erase the channel from memory.

* Function control is available on the unit and the remote control.

** The TV Option will only be displayed and the TV control functions are only available if the optional TV Tuner (P/N PODTVT2) is installed.

9. FMM ON / OFF Button*

Turns the wireless FM Modulator on or off.

10. CHANNEL SELECT Button*

Selects the wireless FM Modulator Frequency (Frequency 1: 88.3MHz, Frequency 2: 88.7MHz, Frequency 3: 89.1MHz, Frequency 4:

89.5MHz, Frequency 5: 89.9MHz)

11. RETURN Button

Not used on this model.

12. DISPLAY Button

Press to display the current disc information while the disc is playing. Press the cursor (pqtu) buttons to highlight the desired

option. For title and chapter selection use the number buttons to enter the desired title or chapter number. For angle, audio, and subtitle.

press the ENTER button repeatedly to change the selected item.

Title

Chapter

Angle

Audio

Subtitle

13. CURSOR / CHANNEL UP DOWN (pqtu) **

Use these buttons to navigate the menu selections on the screen.

Use the CHp to increase the channel number and use CHq to decrease the channel number. **

14. OK Button (ENTER)

Used to implement a selected setting or menu option.

15. MENU Button

Allows the user to access the DVD (DVD MODE) root menu and system menu (TV mode).

DVD

Title

Audio

Subtitle

-/- Chapter Angle 1/1

00:00:14

Ch ENG

Stop

5.1

Off

1/1

16. REPEAT Button

Allows the user to repeat a selected title, chapter, or track.

17. AUDIO Button

Press to display and select the available AUDIO languages in DVD mode. Each time you press the button, the language changes.

Note: The languages for audio vary from disc to disc.

18. SUBTITLE Button

Press to display and select the available subtitle language in DVD mode. Each time you press the button, the subtitle language

changes.

Note: The type and number of languages for subtitle vary from disc to disc.

19. STOP (<) Button*

Press to stop playback.

20. PREVIOUS (9) Button

Press to return to the previous chapter or track.

21. SCAN BACKWARD (7) Button

Press to search in a backward direction. Press repeatedly to change the search speed from 2, 4, 8, and 20 times the normal speed.

22. PAUSE (II) Button*

Allows the user to pause the playback.

Pressing pause again or pressing the Play Button will resume normal playback.

23. PLAY Button*

Press to activate the play mode when a disc is loaded in the disc compartment.

24. SCAN FORWARD (8) Button

Press to search in a forward direction. Press repeatedly to change the search speed from 2, 4, 8, and 20 times the normal speed.

Dieses Handbuch passt für folgende Modelle

Andere Jensen Auto-Videosystem Handbücher

Jensen

Jensen JENHR1D Montage- und Bedienungsanleitung

Jensen

Jensen CMM10 Betriebsanleitung

Jensen

Jensen Mobile Multimedia AM/FM/DVD Receiver VM9410 Bedienungsanleitung

Jensen

Jensen VM9314 Bedienungsanleitung

Jensen

Jensen CAR710X-BC Betriebsanleitung

Jensen

Jensen CAR710 Betriebsanleitung

Jensen

Jensen MVB85A - 8.5" LCD Overhead Monitor Bedienungsanleitung

Jensen

Jensen CMM720 Betriebsanleitung

Jensen

Jensen CMR2720 Betriebsanleitung

Jensen

Jensen CAR110W Betriebsanleitung

Jensen

Jensen VM9224R Bedienungsanleitung

Jensen

Jensen JRV215N Bedienungsanleitung

Jensen

Jensen VR187 Bedienungsanleitung

Jensen

Jensen CAR8000 Betriebsanleitung

Jensen

Jensen CMR270 Betriebsanleitung

Jensen

Jensen VM9224BT Bedienungsanleitung

Jensen

Jensen VM9512HD Bedienungsanleitung

Jensen

Jensen VM9114 Bedienungsanleitung

Jensen

Jensen VX7023 Bedienungsanleitung

Jensen

Jensen VM9424 Bedienungsanleitung

Jensen

Jensen CDR462 Bedienungsanleitung

Jensen

Jensen VM9212N - Multimedia CD/DVD Receiver Bedienungsanleitung

Jensen

Jensen CAR910X Betriebsanleitung

Jensen

Jensen JRV4100 Montageanleitung

Beliebte Auto-Videosystem Handbücher anderer Marken

Stinger

Stinger HEIGH10 RB10RAM13B Bedienungsanleitung

Eonon

Eonon E1057 Bedienungsanleitung

Milion

Milion D2223 Bedienungsanleitung

Metra Electronics

Metra Electronics 99-8153 Bedienungsanleitung

Voxx Electronics

Voxx Electronics HR8MA1 Bedienungsanleitung

Axxera

Axxera AV604Bi Bedienungsanleitung

Clarion

Clarion NX706E Bedienungsanleitung

Pyle view

Pyle view PLDN74BTi Bedienungsanleitung

Clarion

Clarion NX602 Bedienungsanleitung

RCA

RCA DRC6296 - Twin 9" Mobile DVD System Benutzerhandbuch

Kia

Kia MTXM100YPPE Bedienungsanleitung

Lanzar

Lanzar SVDVD5 Bedienungsanleitung

Eonon

Eonon E1060 Bedienungsanleitung

Macrom

Macrom M-AN900 Bedienungsanleitung

Hyundai

Hyundai BAPE-L3000N Bedienungsanleitung

r.LiNK

r.LiNK RL2-UCON8-SM Bedienungsanleitung

Blaupunkt

Blaupunkt DVP 01C Bedienungsanleitung

DP Audio Video

DP Audio Video dbd807nav Bedienungsanleitung