E7
4. To automatically search for stations with strong signals, press and hold the
TUNE+ / - utton until the frequency digits on display egins to scan then release
the utton. The tuner will stop on the first strong signal it finds.
5. Rotate the volume control to o tain the desired sound level.
6. Press the utton on main unit to turn unit into stand y mode after listening. The
LCD acklight will automatically turn off after 15 seconds.
Not s:
- Manual tune to select weaker stations that might e skipped during automatic tuning.
- If the automatic tuning does not stop on the exact frequency of the station, for
example, it stops on 88.9 MHz instead of 88.8 MHz, use the manual tuning method
to "fine tune" to the exact frequency of the desired station.
- In power on mode, the LCD acklight will automatically turn on as default. Tap the
Dimmer utton repeatedly to select right, dim or acklight off.
HINTS FOR BEST RECEPTION:
- The AM antenna is located inside the ca inet of the unit. If AM reception is weak, change
the position of unit until the internal antenna picks up the strongest signal.
- To insure maximum FM tuner reception, the Telescopic Antenna should e fully extended
and rotated to o tain the est possi le station reception.
Radio Station Pr s ts
The unit allows you to store up to 10 AM and 10 FM stations for easy recall at any time.
S tting Pr s t Stations
1. Press the utton to turn on the unit.
2. Tap the AM or FM utton to select AM or FM radio mode.
3. Tune to the radio station you want to store in memory y using the TUNE+/- uttons.
4. Press and hold the memory MEM utton, the preset channel num er “P01” appears on
display and location num er “01” links.
5. To select desired preset station num er, tap the P+ or P- utton.
6. To confirm preset location, tap the MEM utton.
7. Repeat steps 3 to 6 to store other stations if necessary.
Not s:
- There is an approximate 10 seconds delay when programming, after 10 seconds, the
unit will automatically save the preset and switch ack to normal tuner mode.
- You can overwrite a preset station y overwriting and storing the new frequency in its
place.
R calling a Pr s t Station
1. Tap the utton to turn on the unit.
2. Tap the AM or FM utton to select AM or FM radio receiving mode.
3. To select desired preset channel, tap the P+ or P- utton repeatedly.
