Jensen SMPS-1000 Bedienungsanleitung

BLUETOOTH STEREO SPEAKER WITH FM RADIO

USER MANUAL

SMPS-1000

PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND

RETAIN THIS BOOKLET FOR FUTURE REFERENCE.

DEAR JENSEN® CUSTOMER

Selecting fine audio equipment such as the unit you've just purchased is only the start of your

musical enjoyment. Now it's time to consider how you can maximize the fun and excitement

your equipment offers. This manufacturer and the Electronic Industries Association's Consumer

Electronics Group want you to get the most out of your equipment by playing it at a safe level.

One that lets the sound come through loud and clear without annoying blaring or distortion and,

most importantly, without affecting your sensitive hearing.

Sound can be deceiving. Over time your hearing "comfort level" adapts to higher volumes of

sound. So what sounds "normal" can actually be loud and harmful to your hearing. Guard

against this by setting your equipment at a safe level BEFORE your hearing adapts.

To establish a safe level:

•Start your volume control at a low setting.

•Slowly increase the sound until you can hear it comfortably and clearly, and without

distortion.

Once you have established a comfortable sound level:

•Set the dial and leave it there.

Taking a minute to do this now will help to prevent hearing damage or loss in the future. After all,

we want you listening for a lifetime.

We Want You Listening For a Lifetime

Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since

hearing damage from loud noise is often undetectable until it is too late, this manufacturer and

the Electronic Industries Association's Consumer Electronics Group recommend you avoid

prolonged exposure to excessive noise.

Customer's Record:

The serial number of this product is found on its back cover. You should note the serial number

of this unit in the space provided as a permanent record of your purchase to aid in identification

in the event of theft of loss.

Model Number: SMPS-1000 Serial Number: ____________________

WARNINGS

WARNING:

To reduce the risk of fire or electric shock, do not expose this appliance to rain or

moisture.

CAUTION:

Use of controls or adjustments or performance of procedures other than those

specified may result in hazardous radiation exposure.

CAUTION

DO NOT OPEN

CAUTION - TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICING TO QUALIFIED SERVICE

PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is

intended to alert the user to the presence of uninsulated “dangerous voltage”

within the product’s enclosure that may be of sufficient magnitude to

constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the

user to the presence of important operating and maintenance (servicing)

instructions in the literature accompanying the appliance.

IMPORTANT SAFETY INSTRUCTIONS

1) Read these Instructions.

2) Keep these Instructions.

3) Heed all Warnings.

4) Follow all Instructions.

5) Do not use this apparatus near water.

6) Clean only with a dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer’s

instructions. Minimum distances 2 cm around the apparatus for sufficient ventilation. The

ventilation should not be impeded by covering the ventilation openings with items, such as

newspapers, table-cloths, curtains, etc.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce heat.

9) No naked flame sources, such as lighted candles, should be placed on the apparatus.

10) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug

has two blades with one wider than the other. A grounding type plug has two blades and a

third grounding prong. The wide blade or the third prong are provided for your safety.

When the provided plug does not fit into your outlet, consult an electrician for replacement

of the obsolete outlet.

11) Protect the power cord from being walked on or pinched particularly at plugs, convenience

receptacles, and the point where they exit from the apparatus.

12) Only use attachments/accessories specified by the manufacturer.

13) Use only with a cart, stand, tripod, bracket, or table specified by the

manufacturer, or sold with the apparatus. When a cart is used, use

caution when moving the cart/apparatus combination to avoid injury

from tip-over.

14) Unplug this apparatus during lightning storms or when unused for long

periods of time.

15) Refer all servicing to qualified service personnel. Servicing is required when the apparatus

has been damaged in any way, such as power-supply cord or plug is damaged, liquid has

been spilled or objects have fallen into the apparatus, the apparatus has been exposed to

rain or moisture, does not operate normally, or has been dropped.

16) The apparatus shall not be exposed to dripping or splashing and that no objects filled with

liquids, such as vases, shall be placed on apparatus.

17) Main plug is used as disconnect device and it should remain readily operable during

intended use. In order to disconnect the apparatus from the mains completely, the mains

plug should be disconnected form the mains socket outlet completely.

18) Caution mark and name plate are located at the back of apparatus.

19) Battery shall not be exposed to excessive heat such as sunshine, fire or the like.

20) CAUTION

Danger of explosion if battery is incorrectly replaced. Replace only with the same or

equivalent type.

SAVE THESE INSTRUCTIONS

RTABLE

ART WARNIN

(symbol provided by RETAC)

00000S

-1

IMPORTANT NOTES

Avoid installing the unit in locations described below:

•Places exposed to direct sunlight or close to heat radiating appliances such as electric

heaters.

•Places subject to constant vibration.

•Dusty, humid or moist places.

CAUTION

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT. FULLY INSERT

THE PLUG TO MAIN POWER SOCKET.

COMPLIANCE WITH FCC REGULATIONS

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may

cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

- Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Changes or modifications not expressly approved by the party

responsible for compliance could void the user’s authority to operate

the equipment.

Protect Your Furniture

This product is equipped with non-skid rubber 'feet' to prevent the product from moving when

you operate the controls. These 'feet' are made from non-migrating rubber material specially

formulated to avoid leaving any marks or stains on your furniture. However certain types of oil

based furniture polishes, wood preservatives, or cleaning sprays may cause the rubber 'feet' to

soften, and leave marks or a rubber residue on the furniture. To prevent any damage to your

furniture we strongly recommend that you purchase small self-adhesive felt pads, available at

hardware stores and home improvement centers everywhere, and apply these pads to the

bottom of the rubber 'feet' before you place the product on fine wooden furniture.

AC Plug

AC Outle

LOCATION OF CONTROLS

MAIN UNIT

1. BLUETOOTH INDICATOR

2. POWER ON/STANDBY BUTTON

3. VOLUME- BUTTON

4. VOLUME+ BUTTON

5. TUNING/SKIP DOWN BUTTON

6. TUNING/SKIP UP BUTTON

7. BLUETOOTH PAIR/PLAY/PAUSE BUTTON

8. SOURCE BUTTON

9. LCD DISPLAY

10. REMOTE INFRARED SENSOR

11. AUX IN L/R RCA CONNECTORS

12. LINE IN JACK

13. RESET BUTTON

14. AC POWER CORD

3456

REMOTE CONTROL

1. SOURCE BUTTON

2. MUTE BUTTON

3. MEMORY BUTTON

4. MEM- BUTTON

5. NUMERIC BUTTONS

6. BASS +/- CONTROL BUTTONS

7. TREBLE +/- CONTROL BUTTONS

8. POWER ON/STANDBY BUTTON

9. BLUETOOTH PAIR/PLAY/PAUSE BUTTON

10. FM MONO/STEREO BUTTON

11. MEM+ BUTTON

12. CLOCK BUTTON

13. SLEEP BUTTON

14. SKIP BACK /TUNING DOWN / SKIP FORWARD / TUNING UP BUTTONS

15. VOLUME +/- BUTTONS

GETTING STARTED

CONNECTING THE SMPS-1000 TO EXTERNAL AUDIO DEVICES

You can connect the SMPS-1000 audio input to the audio output of your television or

VCR. Please see figure below.

NOTE:

1. Make sure that the power is turned off when connecting or disconnecting the other

devices. Make sure that the other devices are connected to the correct terminals.

2. This unit is not magnetically shielded and may cause color distortion on the screen

of some TVs or video monitors. To avoid this, you may need to move the unit further

away from the TV or monitor if unnatural color shifts or image distortion occurs.

CONNECTING THE AC POWER CORD

After connecting the speakers fully unwind the AC power cord and connect it to any convenient

household 120V~ 60Hz AC outlet.

REMOTE CONTROL BATTERY INSTALLATION

The remote control operates on one CR2025 battery (included). To activate

the remote control, remove the insulation tab inserted in the battery

compartment. To remove the tab, pull it in the direction of the arrow in the

illustration as shown.

When the operation of the remote control becomes intermittent or

unsatisfactory, replace the original battery with a new 3-volt lithium battery.

Replacing the battery in the remote control:

1.) Press in on the side of the battery holder and pull the holder out of the remote.

2.) Removed the exhausted battery and then install 1 new “CR2025” lithium battery

according to the polarity diagram on the battery compartment.

3.) Insert the battery holder into the remote control and make sure it locks into place.

NOTE: Only use a well-known brand of battery to ensure the longest life and best

performance.

Battery Precautions

zReplacement of batteries must be done by an adult.

zThe supply terminals are not to be short-circuited.

zNon-rechargeable batteries are not to be recharged.

zExhausted batteries are to be removed.

zOnly batteries of the equivalent type are to be used.

zBatteries are to be inserted with the correct polarity.

zDispose of batteries properly. Do not dispose of batteries in fire. The batteries

may explode or leak.

REMOVE BEFORE USE

CLOCK SETTING (Using the remote control)

After plugging in the AC power cord, “12:00” will appear and start flashing on the LCD

display.

In unit standby mode,

1. Press and hold the CLOCK button on the remote control until "CLK" shows on the

display, the hour digits blinking.

2. Press the / button on the remote control repeatedly to adjust the hour. Press

and hold the buttons to speed up the forward or reverse scanning of the digits.

Note: Make sure the hour is set so that the PM indicator is displayed correctly.

3. Press the CLOCK button to confirm. Minute digits start blinking on the screen to

prompt for input.

4. Press the / button repeatedly to adjust the minute. Press and hold the buttons

to speed up the forward or reverse scanning of the digits.

5. Press the CLOCK button to complete the setting.

LISTENING TO THE FM RADIO

TUNING THE FM RADIO

1. Press the POWER button to turn on the unit.

2. Press the SOURCE button repeatedly to select TUNER (RADIO) mode.

3. To manually tune the radio station, press TUNING / button on the unit or

/ button on the remote control repeatedly. Use the manual tuning method to

tune to weaker stations that are bypassed during Automatic Tuning.

4. To automatically tune to the next radio station with the strongest signal, press and

hold the / button on the remote or TUNING / button on the unit for 1-2

seconds until frequency readout on the display begins to scan and then release the

button. The tuner will stop scanning when it receives the next strongest station

signal.

Note: When listening to radio, it will display the radio station frequency for few seconds

when tuning and then return to display the current time.

5. You can also direct enter the radio station frequency via the numeric buttons on the

remote control. For example, press buttons 8, 9, 8 and then wait for few seconds to

get to 89.8 MHz. If entered frequency is invalid (out of range), "ERROR" message

will display on the screen.

6. Press the VOLUME +/- button to adjust the volume control to the desired level.

7. If necessary, press the TREBLE or BASS +/- button on the remote control to adjust

treble or bass effect to the desired level.

FM & FM-STEREO RECEPTION

zPress the FM MONO/STEREO button on the remote control to switch between FM

STEREO and FM MONO modes.

zSet the FM reception to “MONO”, stations will be received in MONO mode. When

an FM station is weak or distorted, listening is usually improved by switching the FM

reception to MONO mode.

zSet the FM mode to the “STEREO” to receive stereo broadcasts. The “STEREO”

indicator will show in LCD display to show an FM stereo station is detected.

HINTS FOR BEST RECEPTION:

The receiver has a build-in FM wire antenna, slightly rotate the unit or reposition for the

best reception.

NOTE: Automatic tuning depends on the signal strength of the broadcasting station, so

weak stations may be skipped. You can manually tune to find the weak stations

if a station gets skipped. With strong signals, the tuner may stop before it

reaches the actual broadcast frequency, so you may need to manually tune for

the best reception.

PRESET RADIO STATIONS

This unit has 20 preset memories for the FM radio.

1. Press the POWER button to turn on the unit.

2. Press the SOURCE button to select TUNER mode.

3. Tune to the desired radio station either by “manually” or “automatically” tuning

method.

4. Tap the MEMORY button on the remote to enable the program function and the

preset location “P01” will show on the LCD display and flash.

5. Press the MEM + or MEM - button to select the preset number you want to assign

the station to.

6. Tap the MEMORY button on the remote to confirm the setting.

7. Repeat above steps 3-6 to store other stations.

RECALLING PRESET MEMORY CHANNELS

In radio mode, recall the pre-set channels by tap the MEM+/- button on the remote

repeatedly.

Inhaltsverzeichnis

Andere Jensen Sprecher Handbücher

Jensen

Jensen Multi-Purpose Speakers JS43 Bedienungsanleitung

Jensen

Jensen JPW410 Bedienungsanleitung

Jensen

Jensen SMPS-610 Bedienungsanleitung

Jensen

Jensen SMPS-640 Bedienungsanleitung

Jensen

Jensen JSB-1000 Bedienungsanleitung

Jensen

Jensen Subwoofer PS12 Bedienungsanleitung

Jensen

Jensen jsbw-650 Bedienungsanleitung

Jensen

Jensen JBD-400 Bedienungsanleitung

Jensen

Jensen SMPS-665 Bedienungsanleitung

Jensen

Jensen JTA-315 Bedienungsanleitung

Jensen

Jensen XRS Series Bedienungsanleitung

Jensen

Jensen JXHD35 Bedienungsanleitung

Jensen

Jensen SMPS-621 Bedienungsanleitung

Jensen

Jensen Elite-101 Bedienungsanleitung

Jensen

Jensen SMPS-625 Bedienungsanleitung

Jensen

Jensen SMPS-650 Bedienungsanleitung

Jensen

Jensen TRIAXIAL Series Betriebsanleitung

Jensen

Jensen SMPS-600 Bedienungsanleitung

Jensen

Jensen SMPS-627 Bedienungsanleitung

Jensen

Jensen SFA900 Bedienungsanleitung

Jensen

Jensen MSX60CSS Bedienungsanleitung

Jensen

Jensen SMPS-626 Bedienungsanleitung

Jensen

Jensen MS6151DC - SCHEMA Bedienungsanleitung

Jensen

Jensen SMPS-627 Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung